How often should the spark plugs be replaced on a Nissan Qashqai?

1 Answers
Brandon
07/29/25 10:14pm
It is recommended to consider replacing the spark plugs on a Nissan Qashqai after driving more than 40,000 kilometers. Under normal maintenance conditions, car spark plugs should be replaced between 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine, so it is advisable to follow the user manual. You can refer to the following standards for maintenance and replacement: platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Steps for replacing spark plugs: Open the hood, lift the plastic cover of the engine, and remove the high-voltage distributor wires. Mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for any external debris like leaves or dust and ensure they are cleaned thoroughly. Place the new spark plugs into the spark plug holes, hand-tighten them a few turns, and then use the socket to tighten them further. Reinstall the removed high-voltage distributor wires according to the firing order and secure the cover.
Was this review help?
10
4
Share
More Forum Discussions

Is the Tharu produced by FAW or SAIC?

The Tharu belongs to SAIC Volkswagen. Below is relevant information about the Tharu: 1. SAIC Volkswagen currently offers 5 SUV models: Tharu, Tiguan, Tiguan L, Teramont, and Tiguan L PHEV. 2. FAW Volkswagen has 2 SUV models: Tayron and T-Roc. 3. The Tharu was launched on October 31, 2018, positioned as a compact SUV to replace the Tiguan, which will be gradually phased out. 4. Dimensions: 4453/1841/1632mm (L/W/H) with a 2680mm wheelbase. 5. Its overall appearance resembles a smaller version of the Teramont. 6. Standard safety features include ESP stability control, front airbags, ASR traction control, and tire pressure monitoring. 7. Powertrain options: 1.4T inline 4-cylinder turbo and 2.0T inline 4-cylinder turbo engines, all paired with a 7-speed dual-clutch transmission.
13
3
Share

What Transmission Does the New Emgrand Use?

The manual transmission in the Geely New Emgrand is developed with Geely's proprietary technology and is a domestically produced transmission. The automatic transmission is sourced from the Belgian company Punch, a globally renowned CVT transmission supplier. Below are the characteristics of the CVT transmission: 1. Excellent fuel economy—CVT can achieve continuously variable transmission over a wide range, improving engine combustion efficiency. 2. Strong power performance—CVT can achieve closed-loop control with the engine, fully utilizing the engine's maximum torque. 3. Superior comfort—the shifting process is continuous and linear, with no gearshift shocks during acceleration and no downshift jerking during sudden acceleration. 4. Excellent handling—the transmission is matched with a torque converter, which can amplify engine torque, enabling quick starts and smoother acceleration. 5. Maintenance-free for life—reliability and lifespan mainly depend on the material of the metal belt drive components. 6. Simple structure, reliable performance, high transmission efficiency, purely mechanical control, and fast shifting response. 7. Reduced harmful emissions—closed-loop control with the engine allows the engine to operate frequently within the economical speed range, improving the combustion process, thereby reducing harmful emissions and extending the lifespan of the catalytic converter and oxygen sensors.
11
0
Share

How to Activate the Camry's Automatic Braking Function?

The Camry's braking function is automatically enabled by default. Below is an introduction to the Camry's active braking function:1. While the vehicle is in motion, the radar distance detector transmits information about the presence of vehicles, pedestrians, bridge columns, and other objects within the detection range to the electronic control processor. Based on the vehicle's speed and the distance to the object ahead, the processor issues a separation command to the electric clutch pump and varying degrees of braking commands to the electric brake pump, thereby slowing down or abruptly stopping the vehicle.2. Advantages of automatic braking: Active braking not only effectively prevents harm to pedestrians ahead but also proves useful in traffic congestion. Prolonged congestion in urban driving can distract the driver, and this function helps avoid rear-end collisions. During high-speed driving, active braking technology can also achieve active deceleration, thereby reducing risks and losses.
17
1
Share

Which company produces the Lynk & Co 05?

Lynk & Co 05 is produced at the Yuyao factory. The Lynk & Co 05 is a compact crossover SUV under the Lynk & Co brand, with a wheelbase of 2734 mm, and dimensions of 4592 mm in length, 1879 mm in width, and 1628 mm in height. This model is equipped with a 2.0-liter turbocharged engine across all variants. Below are some key details about the Lynk & Co 05: 1. The 2.0-liter turbocharged engine in the Lynk & Co 05 delivers 254 horsepower and a maximum torque of 350 Nm. The engine reaches its peak power at 5500 rpm, with maximum torque available between 1800 and 4800 rpm. It features direct fuel injection technology and uses an aluminum alloy cylinder head and block. 2. The Lynk & Co 05 utilizes a MacPherson independent suspension at the front and a multi-link independent suspension at the rear. The multi-link independent suspension is a structurally complex type of independent suspension, derived from an improved double-wishbone design. It replaces the two wishbones of the double-wishbone suspension with separate links. 3. The Lynk & Co 05 is available in both front-wheel drive and all-wheel drive versions. The all-wheel drive models are equipped with an on-demand four-wheel drive system. Vehicles with on-demand four-wheel drive do not constantly power all four wheels; they primarily operate in two-wheel drive mode during normal driving conditions.
1
5
Share

Is the Lincto sensor integrated with the bearing?

The Lincto sensor and bearing are integrated and cannot be replaced separately. Here is some information about it: 1. The working principle of automotive sensors is to convert various operating conditions of the car, such as speed, temperature of various media, and engine operating conditions, into electrical signals and transmit them to the computer, so that the engine can be in the optimal working state. 2. The detection method of the camshaft position sensor is as follows: 1. Unplug the connector, turn the key to the second position, and use a voltmeter to measure and confirm that the power line has voltage output; 2. Use the meter to determine the ground wire. Connect one probe of the voltage meter to the confirmed power line, and connect the other probe to the other two wires to measure the one with voltage, which is the ground wire, and the remaining one is the signal wire; 3. At this time, turn off the key to lead out the signal wire, plug back the connector, start the engine, and measure the signal wire and ground wire to see if there is a signal voltage output. The output voltage should be less than the supply voltage. If there is no voltage, the sensor is basically broken; 4. At the same time as the above steps, check whether the signal on the camshaft is good, whether there is any debris between the camshaft sensor and the signal gear, and whether the gap is normal.
18
1
Share

What brand are the tires on the Changan Oshan X7?

The tire brand for the Changan Oshan X7 is: Linglong Tires. The specific model is: Crosswind, 4x4. The tire specifications are: 235/45R20. Below are several situations when new tires should be replaced: 1. When there is a nail puncture in the tread and the hole diameter is larger than 6mm. 2. When there is a nail puncture, crack, or air leakage in the tire shoulder or sidewall. 3. Check the tire pressure; if the tire has a nail puncture and the air leakage causes the pressure to approach zero after driving a certain distance. 4. Check the tread depth; replace if it is less than or equal to 1.6mm. 5. Check the tire wear level; periodically rotate the wheels diagonally to help the tires achieve even wear.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.