···
Log in / Register

How often should the spark plugs be replaced on a Buick Excelle?

4 Answers
LeGabriel
07/29/25 1:45pm
Buick Excelle's spark plugs should be replaced every 40,000 kilometers. Spark plugs utilize high-voltage discharge to break down the air between electrodes, generating an electric spark to ignite the combustible air-fuel mixture in the combustion chamber, thereby maintaining engine operation. When removing or installing spark plugs, care must be taken to prevent dust from entering the cylinder. The surrounding area should be cleaned thoroughly before removing the spark plugs. The Buick Excelle is a compact car under SAIC-GM Buick, with dimensions of 4609mm in length, 1798mm in width, and 1486mm in height, and a wheelbase of 2640mm. The vehicle is equipped with safety features such as SBZA Side Blind Zone Alert, TPMS Intelligent Tire Pressure Monitoring System, rear parking sensors, Bosch ESP9.1 Electronic Stability Control System, laser-brazed integrated roof, and auto-dimming rearview mirror.
Was this review help?
19
5
Share
ElainaLee
08/14/25 4:56am
I've asked quite a few mechanic friends about changing spark plugs and also checked the manual for the Excelle. Generally speaking, the recommended spark plug replacement interval for the Buick Excelle is between 60,000 to 100,000 miles, depending on your model year and engine type. For example, newer models with iridium spark plugs last longer, while older versions might need earlier replacement. If you drive aggressively or frequently encounter city traffic congestion, the spark plugs wear faster and may need replacement as early as 50,000 miles. I remember when my car reached 65,000 miles, I noticed sluggish acceleration - inspection revealed severely carbon-fouled spark plugs. After replacement, fuel efficiency improved noticeably. Regular maintenance with mechanic inspections of electrode condition is advisable. Delayed replacement may lead to hard starting or engine vibration issues.
Was this review help?
12
1
Share
Expand All
MacAubrey
10/10/25 5:02am
I drive a Buick Excelle for my daily commute and have some insights on spark plug replacement intervals. Generally, they should be changed every 70,000 miles or so, but driving habits can affect this. I tend to accelerate aggressively, which shortens spark plug lifespan. While the manual recommends 75,000 miles, I replace them earlier. Pay attention to vehicle performance - slow starts or reduced fuel efficiency are warning signs. Spark plug replacement isn't expensive, but it improves engine efficiency and saves fuel costs. Long-term neglect can lead to aged spark plugs causing misfires, resulting in either increased fuel consumption or even engine damage. The most convenient approach is to handle it during routine maintenance.
Was this review help?
17
1
Share
Expand All
OHector
11/23/25 6:13am
Spark plug replacement requires specific analysis for the Buick Excelle engine. Nickel alloy plugs should be changed every 60,000 miles, while platinum or iridium plugs can last up to 100,000 miles. Check the electrodes for erosion or carbon deposits. After reaching the specified mileage, inspect their condition and replace immediately if any abnormalities are found. Delayed replacement may lead to ignition failure, power reduction, and increased fuel consumption. My recommendation is to schedule regular professional maintenance to ensure safe operation.
Was this review help?
18
4
Share
Expand All
More Forum Discussions

Has the Size of the New Odyssey Changed?

There are no changes in the dimensions of the new Odyssey, with its length, width, and height remaining at 4847mm, 1820mm, and 1712mm respectively. Exterior: The new Odyssey features a completely redesigned front grille, with a jagged chrome grille paired with a sporty shovel-shaped front bumper and matrix headlight clusters, creating a stronger sense of quality and impact. The blackened B-pillars, C-pillars, and privacy glass on the sides maintain the strong family MPV characteristics, while the internal matrix light arrangement ensures high visibility when lit. Powertrain: The new Odyssey continues to be equipped with Honda's i-MMD hybrid system, delivering a maximum combined output of 215 horsepower, matched with an E-CVT transmission.
8
3
Share

What are the causes of shock absorber noise in the XPeng P7?

XPeng P7 shock absorber noise is caused by: foreign objects getting caught in the chassis; damage to chassis components; or shock absorber failure. Appearance: The XPeng P7 features a distinctive front and rear continuous light strip design, with smooth and flowing body lines. The front face adopts a fully enclosed grille design exclusive to electric vehicles, with split-type LED headlights positioned at both ends of the front, capable of emitting sharp light in narrow spaces, giving it a futuristic appearance. Performance: The XPeng P7 is equipped with two high and low power motor units as power output. The mid and low trim models use rear-mounted motor drive, with a maximum power of 196 kW and a maximum torque of 390 Nm.
4
5
Share

Where is the low beam fuse located in the Baojun 730?

The low beam fuse in the Baojun 730 is located in the engine compartment of the car, as well as on the left side of the steering wheel and near the driver's knee position. Introduction to automotive fuses: Automotive fuses are a type of current fuse. When the circuit current exceeds twice the rated current of the fuse, it will melt within seconds, serving to protect the circuit. They are commonly used for overcurrent protection in automotive circuits and also for overcurrent protection in industrial equipment. Precautions for replacement: When replacing a fuse, it is necessary to use one with the rated current value specified on the fuse box cover. Do not replace it with a fuse that has a higher rated current. If the new fuse blows immediately, it indicates that there may be a fault in the circuit system, and it should be inspected and repaired as soon as possible.
5
5
Share

Where is the jack located on the LaCrosse?

The jack of the LaCrosse is located under the trunk mat. Configuration of the LaCrosse: Features such as an openable panoramic sunroof, LED lights, multi-layer soundproof glass, an 8-inch touch screen, smartphone connectivity, vehicle networking, and OTA upgrades are all standard. The Avenir flagship version additionally includes a HUD head-up display, adjustable suspension stiffness, rear multimedia controls, front and rear seat heating, ventilation, massage functions, and rear independent air conditioning. Powertrain of the LaCrosse: It is equipped with the eighth-generation Ecotec 2.0T variable cylinder turbocharged engine, model LSY, with a maximum rated power of 174 kW and a maximum torque of 350 Nm, paired with a 9AT transmission. The official 0-100 km/h acceleration time is 7.5 seconds.
1
2
Share

How many liters of engine oil are needed for Mercedes-Benz G63 maintenance?

Mercedes-Benz G63 maintenance requires 8 liters of engine oil if completely drained, and 7 liters if not fully drained. Introduction to Engine Oil: Currently, engine oils are categorized into three types: conventional mineral oil, semi-synthetic oil, and full synthetic oil. Engine oils are primarily classified by quality grades into SG, SJ, SL, SM, and SP, with SP being the highest grade in automotive engine oils, meeting the lubrication needs of most vehicle engines. Precautions for Engine Oil Replacement: Choose the appropriate engine oil grade based on the local temperature to prevent the oil from freezing in cold weather. Additionally, engine oil must be replaced regularly according to the type of oil used, with replacement cycles corresponding to six months, nine months, and twelve months respectively.
16
5
Share

What Causes the Sunroof Rattle in BMW 740?

BMW 740 sunroof rattle is caused by: insufficient lubricant in the sunroof tracks or the presence of dust and foreign objects on the tracks. Daily lubrication of the sunroof: Fully open the car sunroof, wipe off dust on the tracks with a clean soft cloth, and apply a dust-resistant lubricant to the sunroof tracks and transmission channels. Sunroof cleaning precautions: In spring and autumn, clean the sealing rings with a damp sponge every quarter. Before long-term parking, thoroughly clean the sunroof with talcum powder to prevent chemical aging of the rubber seals due to prolonged exposure. High-pressure car wash: When washing the car with a high-pressure water gun, avoid directing the water jet directly at the sunroof's sealing rings, as this may cause deformation under high water pressure.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.