How often should the spark plugs be replaced in a Nissan Qashqai?

1 Answers
VonSteven
07/30/25 6:33am
It is recommended to consider replacing the spark plugs in a Nissan Qashqai after driving more than 40,000 kilometers. Under normal maintenance conditions, car spark plugs should be replaced after 40,000 to 60,000 kilometers of driving. However, this may vary depending on the brand and engine, so it is advisable to follow the user manual. The following standards can be referenced for maintenance and replacement: platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Steps for replacing spark plugs: Open the hood, lift the plastic cover of the engine, and remove the high-voltage distributor wires. Mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for any external debris like leaves or dust and ensure they are thoroughly cleaned. Place the new spark plugs into the spark plug holes, hand-tighten them a few turns, and then use the socket to tighten them further. Reinstall the removed high-voltage distributor wires according to the firing order and secure the cover.
Was this review help?
5
0
Share
More Forum Discussions

How to Reset the Total Mileage on a Wuling?

Locate the position on the car's clutch housing (note that this position may vary—some vehicles have it on the transmission or driveshaft odometer sensor plug), then gently pull it out by hand; Next, insert the output clip of the mileage adjuster into the signal socket of the pulled-out sensor plug, and accurately insert the mileage adjuster into the cigarette lighter; Turn it slightly, adjust the small knob on the dashboard, and set the car's mileage to the desired value.
19
5
Share

Should a Lean Fuel Mixture Be Repaired?

Of course, a lean fuel mixture should be repaired. Additional information is as follows: 1. Consequences of a lean fuel mixture: If the fuel system is running lean, it is necessary to immediately go to the nearest repair shop for inspection. Continuing to drive may result in reduced acceleration, increased fuel consumption, and in more severe cases, engine stalling. A lean fuel mixture occurs when the engine's oxygen sensor detects incomplete combustion of gasoline, characterized by too much air and too little fuel. Causes of a lean fuel mixture include insufficient fuel pressure, faulty oxygen sensors, malfunctioning air flow meters, intake system leaks, clogged fuel injectors, etc. 2. Automotive fuel system: The fuel system is responsible for fuel filling and transportation, ensuring that fuel smoothly reaches the engine to power its operation. It also collects fuel vapors, filters them, and releases them into the atmosphere. When the engine is running, the ECU detects the conditions for opening the charcoal canister purge valve. Once opened, fuel vapors are drawn into the engine under the vacuum of the intake manifold to participate in combustion.
7
2
Share

Will the car owner be held responsible if lending the car to someone who drives under the influence?

The car owner is not at fault and will not bear compensation liability. Since the latest Tort Liability Law came into effect on July 1, 2010, the law clearly stipulates that in the event of an accident caused by lending a car to others, the losses shall be borne by the insurance company and the driver. If the car owner is not at fault, they will not be liable for compensation. In other words, under normal circumstances, as long as the car owner lent the car to a friend who was not drinking at the time, and the friend drove under the influence after borrowing the car, and the car owner has no other faults, then the car owner will not be liable for compensation. The car owner's faults generally include the following situations: 1. Lending the car to someone without a driver's license or whose license has expired, been revoked, or confiscated; 2. Lending the car to someone who is drunk; 3. Lending the car to someone whose driver's license type does not match the vehicle type.
14
1
Share

Does Mercedes-Benz ECO Mode Damage the Car?

Mercedes-Benz ECO mode does not damage the car. The Mercedes-Benz ECO is an energy-saving mode that helps conserve fuel when activated. How ECO mode works: The ECO mode primarily makes comprehensive judgments and analyses during vehicle movement regarding factors that affect fuel consumption, such as automatic transmission gear position, engine speed, vehicle speed, braking, and transmission oil temperature. The ECU control unit then calculates the optimal fuel quantity to supply the engine for operation, effectively reducing fuel consumption compared to normal driving mode. Limitations of ECO mode: When the vehicle speed exceeds 120 km/h, priority is given to maintaining speed, and the ECO mode automatically deactivates. The ECO mode mainly functions through computer-controlled operations while the vehicle is in motion, so it does not work during idle stops or when in N, P gear, or manual mode. Additionally, when overcoming certain resistance or requiring high torque output, such as when climbing a slope, the ECU prioritizes ensuring sufficient power to drive the vehicle, and the ECO mode will not operate.
1
3
Share

What is the circumference of a 27.5 tire?

27.5 refers to the diameter of the wheel rim, and the circumference of a 27.5 wheel set is 2115 millimeters. Interpretation of tire size: Tire sizes are usually marked on the sidewall with a series of letters and numbers. Taking a tire with the size 235/45/R18/98W as an example, it indicates a tread width of 235mm, an aspect ratio of 45%, R stands for radial tire, suitable for a rim diameter of 18 inches, a maximum load index of 750kg, and a maximum speed rating of 270km/h. Impact of tire size on vehicles: Tire size has a significant impact on a car's performance and comfort, so choosing the right tire size is very important. Of course, tires come in many specifications and sizes. Tire sizes are measured in millimeters and indicate the tire width, aspect ratio, tire type, rim diameter, load index, and speed rating.
13
2
Share

How fast can a 350w motor go after speed limit removal?

350w motor can reach a maximum speed of 30KM/H after speed limit removal. Here are the specific details: 1. 400W-450W full-disc motors can reach 40KM/H, while electric motorcycle motors above 500W can exceed 50KM/H. 2. For vehicles with 48V12ah batteries and 350W motors: they can generally travel 60-80 kilometers. 3. For vehicles with 48V20AH batteries and 500W motors: they can generally travel 80-100 kilometers. Here are some additional details: 1. Introduction: A motor is an electromagnetic device that achieves electrical energy conversion or transmission based on the law of electromagnetic induction. 2. Function: In circuits, motors are represented by the letter M, and their main function is to generate driving torque as a power source for electrical appliances or various machinery. Generators are represented by the letter G in circuits, and their main function is to convert mechanical energy into electrical energy.
18
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.