···
Log in / Register

How often should the spark plugs be replaced for the Buick Excelle?

4 Answers
VanOlive
07/29/25 4:22am

Buick Excelle spark plug replacement intervals vary depending on the material of the spark plugs: 1. Conventional spark plugs need replacement approximately every 30,000 kilometers; 2. Platinum spark plugs should be replaced around 60,000 kilometers; 3. Iridium spark plugs require replacement at about 80,000 kilometers. Spark plugs are crucial components in a gasoline engine's ignition system, which introduce high voltage electricity into the combustion chamber and generate sparks by jumping the electrode gap, thereby igniting the combustible mixture in the cylinder. The Buick Excelle is a compact car under SAIC-GM Buick. Taking the 2021 Buick Excelle as an example, its body dimensions are: length 4609 mm, width 1798 mm, height 1486 mm, with a wheelbase of 2640 mm.

Was this review help?
18
4
Share
OValentina
08/12/25 4:34pm

For the replacement interval of the Buick Excelle's spark plugs, the official manual generally recommends every 30,000 to 60,000 kilometers or every 3 years, depending on your engine model and spark plug type. For example, copper-core plugs need replacement every 30,000 km, while long-life iridium spark plugs can last over 80,000 km. I personally use iridium plugs and replace them every 50,000 km. Last time, I forgot to replace them on time and experienced engine starting difficulties, with fuel consumption soaring to 10 liters per 100 km. After spending some money on new spark plugs, it returned to the normal consumption of 8 liters per 100 km. I’ve also noticed that driving habits make a big difference—frequent stop-and-go city driving accelerates wear. It’s advisable to check spark plug carbon buildup during regular maintenance. Preventive maintenance is much cheaper than repairs and can also improve acceleration response, making driving smoother.

Was this review help?
20
3
Share
Expand All
JamesAnn
10/03/25 2:49am

Don't delay replacing spark plugs too long. The Buick Excelle manual recommends changing them every 30,000 to 50,000 kilometers, and I think replacing them every 40,000 kilometers is the most cost-effective. Why? Because individual spark plugs aren't expensive, costing around 100 to 200 yuan, but failing to replace them promptly can lead to ignition coil failure, with repair costs potentially reaching thousands. My neighbor learned this the hard way—he waited until 60,000 kilometers to replace them, and his engine started shaking uncontrollably, costing him a fortune to fix. From another perspective, the replacement interval depends on your daily driving habits. For example, if you frequently drive in congested urban areas, spark plugs wear out faster, so it's best to replace them every 30,000 kilometers—saving money and fuel, with fuel consumption potentially dropping by 1 to 2 liters per 100 kilometers. In short, regular maintenance ensures safety—don't underestimate this small component.

Was this review help?
3
2
Share
Expand All
ChloeFitz
11/16/25 4:28am

For the Buick Excelle, the timing for changing spark plugs depends on individual driving habits. I drive a lot on highways and change my spark plugs every 50,000 kilometers, while the manual usually suggests a range of 30,000 to 60,000 kilometers. If you frequently accelerate hard or start the engine often, you might need to replace them earlier. During maintenance, ask the mechanic to check for carbon buildup—replace them immediately if there's too much buildup. After replacement, the car will accelerate more smoothly and avoid breaking down midway. Don’t delay too long; regular maintenance keeps things running smoothly.

Was this review help?
5
3
Share
Expand All
More Forum Discussions

What is the purpose of polishing?

The following are the functions of automotive polishing: 1. Used to reduce the surface roughness of the car, obtaining a bright and smooth surface. 2. Removes issues affecting the paint appearance such as the oxidation layer on the paint surface, shallow scratches, and loss of gloss caused by oxidation. Below are the methods for polishing different automotive issues: 1. Defect removal: Spray a small amount of water on the paint surface, use P1500 pyramid sandpaper with a dry grinder to sand the entire surface once in all directions (up, down, left, right) until the paint surface becomes matte; after sanding, use a rubber squeegee to scrape off the white foam on the surface, observe the paint surface to identify prominent defects, then spray a small amount of water on the sanding disc to remove the defects. 2. Overly fine paint surface: Use a dry grinder with P3000 pyramid sanding disc and a dry sanding soft pad to finely sand the overly fine paint surface, spray a certain amount of water on the sanding disc and paint surface, and sand the entire paint surface twice in each direction (up, down, left, right) at a faster speed. After sanding, use a rubber squeegee to scrape off the surface water and white foam. Quality standard: The paint surface should be free of defects such as oxidation layers and scratches. 3. Coarse wax polishing: Further removes surface sanding marks after sandpaper grinding, restoring the paint surface's smoothness and initial gloss. Apply wax evenly on a certain area of the paint surface, with the polisher speed controlled between 1200-2000 RPM. Initially, apply medium to high pressure to the polishing pad to polish the paint surface at a uniform speed. Observe the paint surface, and once the sanding marks are significantly removed, reduce the pressure to remove the wax marks, restoring some gloss to the paint surface. After polishing, use a microfiber cloth to clean off any residual coarse wax and dust from the paint surface.
9
3
Share

Driving Test Subject 3 Lighting Mnemonic Table?

Subject 3 lighting test mnemonic: 1. Driving at night without street lights and under poor lighting conditions; (high beam) 2. Meeting non-motor vehicles on narrow roads at night; (low beam) 3. Following vehicles closely in the same direction at night; (low beam) 4. Meeting motor vehicles at night (low beam) 5. Passing over arch bridges and pedestrian crossings at night; (alternate between high and low beams) 6. Passing sharp curves and slopes at night; (alternate between high and low beams) 7. Passing intersections without traffic signals at night; (high and low beams) 8. Vehicle breakdown on the road at night, obstructing traffic and difficult to move. (width lights, hazard warning lights) 9. Driving in foggy weather (fog lights, hazard warning lights) Summary: No lights turn on high beam, following or meeting vehicles use low beam, the word 'passing' means alternate between high and low beams.
4
0
Share

What to Do if There's a Small Cut on the Sidewall of a Tire?

If the sidewall of a tire is scratched, it must be replaced as soon as possible to avoid the risk of a high-speed blowout. If the damage on the contact surface exceeds 4mm, the tire should also be replaced immediately, as both internal and external repairs pose potential dangers. It is not recommended to use the vehicle before the tire is inspected and repaired (especially if the front tire is damaged). It is advisable to remove the tire to check for internal punctures. Considering safety, if this area is punctured, it is not recommended to repair it—replacement is necessary. The following five habits can extend tire life: 1. Develop the habit of checking tire pressure regularly. Air pressure is key to extending tire life—if tire pressure frequently exceeds the normal level by 20%, tire life will decrease by 10%; if it is frequently 30% below normal, tire life will be reduced by 52%. 2. Maintain consistent air pressure. Tire pressure is the life of a tire. If pressure is too low, the tire body deforms more, leading to cracks on the sidewalls and excessive heat generation, which accelerates rubber aging, fatigue of the cord layer, and cord breakage. 3. Regularly remove foreign objects from the tire. While driving, small stones often get lodged in the tread grooves. If not removed promptly, these stones can puncture the tire over time, causing leaks or blowouts. 4. Adopt scientifically sound driving habits. When driving on roads with significant curvature, try to stay centered to avoid and reduce vehicle weight shifts, which can increase uneven tire wear due to uneven load distribution. 5. Maintain accurate wheel alignment. Front-wheel alignment greatly impacts tire lifespan, with toe-in and camber being the primary factors. Excessive camber accelerates shoulder wear (uneven wear), while incorrect toe-in mainly accelerates wear on the inner and outer edges of the tire.
17
1
Share

What causes odors inside an Audi A4?

Audi A4 interior odors may be caused by sound insulation cotton, vibration damping pads, and interior materials. Solutions are as follows: Ventilation method: For the first six months after purchasing a new car or after decoration, develop the habit of moderately opening windows while driving to maintain fresh air circulation inside the vehicle. Chemical product method: Herbal formaldehyde remover, a general term for plant-based solutions, can be sprayed on floor mats and seats to decompose new car odors. Activated charcoal method: Place activated charcoal inside the new car. Higher-quality options include using Ye Guangni material, which can be reused. Vinegar method: When the car is not in use, place a small bucket of water with some vinegar inside the vehicle. The water can absorb formaldehyde while the vinegar helps stabilize it.
7
0
Share

Can I Transfer to a Driving School in Another Location?

Legal Analysis: Yes, the process for transferring your driver's license examination to another location mid-way is as follows: 1. If the applicant has passed Subject 1, Subject 2, or Subject 3 in the original examination location, they can apply to the vehicle management office in their current residence to change the examination location and continue with the remaining subjects. 2. If the applicant has registered but not yet passed Subject 1 in the original examination location, they can re-register for the examination in their current residence. The original registration information system will be automatically canceled, and after re-registering, they can still apply to change the examination location once. 3. After the application is accepted, the applicant should schedule the examination via the internet service platform. The total number of scheduled examinations for Subject 2 and Subject 3 (road driving skills) in both the transfer-in and transfer-out locations cannot exceed five times each. 4. After the applicant passes all subjects, the vehicle management office in the transfer-in location will issue the certificate and archive it. 5. After a successful transfer, the applicant can start practicing and taking exams at a driving school in their current residence. Procedures may vary slightly in different regions, so it's advisable to consult the local vehicle management office for specifics.
5
2
Share

How to Insert a USB Drive in an 11th-gen Passat?

First, open the glove compartment on the passenger side by gently pulling it. Locate the USB port inside the glove compartment and pull it out. Insert the prepared USB drive containing the files you want to play into this USB port.
20
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.