How often should the Reiz transmission fluid be changed?

1 Answers
ZoeFitz
07/30/25 1:25am
The Reiz requires transmission fluid replacement every 4 years. Transmission fluid is an oil product that maintains the cleanliness of the gear system, providing lubrication to extend the lifespan of the transmission components. It offers effective lubrication even in low-temperature conditions and reduces oil loss under severe operating conditions. The Reiz has dimensions of 4750mm in length, 1795mm in width, and 1450mm in height, with a wheelbase of 2850mm, front and rear track of 1545mm, and a fuel tank capacity of 70 liters. This vehicle is equipped with a 2.5L naturally aspirated engine, delivering a maximum power of 142 kilowatts at 6200 rpm and a maximum torque at 4400 rpm.
Was this review help?
19
4
Share
More Forum Discussions

What engine does the Nissan X-Trail use?

Nissan X-Trail engines are: 2.0-liter inline 4-cylinder naturally aspirated engine and 2.5-liter inline 4-cylinder naturally aspirated engine. They are domestically produced. The Nissan X-Trail engine model is KR15, with a maximum power of 113kw and a maximum torque of 204nm; the 2.5-liter engine has a maximum power of 137kw and a maximum torque of 246nm. For daily maintenance of the Nissan X-Trail engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, with the selection standard not lower than the manufacturer's specified requirements; Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, which can cause various problems for the engine. To avoid malfunctions, oil should be changed regularly based on usage conditions, and the oil level should be kept moderate; When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and oil cannot pass through the filter element, it may rupture the filter element or open the safety valve, bypassing the filter and carrying dirt back to the lubrication area, accelerating engine wear and increasing internal contamination; Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from component wear to form sludge. Small amounts remain suspended in the oil, while larger amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear; Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
14
1
Share

Where is the thermostat located on the Tiggo 3?

The thermostat of the Chery Tiggo 3 is located at the upper water outlet of the engine. A car thermostat is a valve that controls the flow path of engine coolant. It automatically adjusts the amount of water entering the radiator based on the coolant temperature to ensure the engine operates within an appropriate temperature range, which helps save energy consumption. Below are the steps for replacing the thermostat: 1. Turn off the engine and open the front hood. Disconnect the negative terminal of the battery to prevent the electric fan from suddenly operating during the work, which could cause personal injury; 2. Remove the plastic cover outside the timing belt. The position of the generator may affect the thermostat replacement, so the generator assembly needs to be removed. Place a water collection tray under the car and prepare to remove the water pipe; 3. After removing the lower water pipe, the antifreeze will gush out, so be careful to avoid burns. At this point, the thermostat itself can be seen. Remove the faulty thermostat; 4. Install the new thermostat. After installation, apply a layer of sealant to the water pipe area to prevent water leakage.
13
0
Share

Where is the tire pressure reset button on the vv7s?

vv7s tire pressure reset button is on the dashboard, which is a black pillar. Great Wall vv7s tire pressure warning reset elimination: Press the black pillar on the dashboard, turn the key three times, from off to the second gear, without starting the vehicle, you can eliminate it. If it is time for maintenance, try not to delay the warranty, the first maintenance is at 5000 kilometers. More details are as follows: 1. Modern car maintenance mainly includes the engine system (engine), transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting or replacing certain parts of the car, also known as car maintenance. 2. Daily maintenance is daily maintenance, primary maintenance is performed by professional maintenance companies, the main content of the operation center is in addition to daily maintenance operations, mainly cleaning, lubrication, and tightening, and checking the safety parts related to braking and operation. It is the operation before driving, during driving, and after parking, which is the responsibility of the driver, the main content of the operation center is cleaning, supplying and safety inspection, which is a regular and necessary work to maintain the normal working condition of the vehicle.
14
0
Share

Does the Lingpai have a four-cylinder engine?

The 1.8L Lingpai is a four-cylinder model. Its engine is produced by Dongfeng Honda's engine factory. The engine model of the Lingpai is P10A3, with a maximum power of 90kw and a maximum torque of 173nm. For daily maintenance of the Lingpai's engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, with the selection standard not lower than the manufacturer's requirements; Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, its performance deteriorates, which can cause various problems for the engine. To avoid failures, change the oil regularly based on usage conditions and keep the oil volume moderate; When the oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and the oil cannot pass through the filter element, it will either burst the filter element or open the safety valve, allowing the oil to bypass through the bypass valve, bringing dirt back to the lubrication parts, accelerating engine wear and increasing internal contamination; Regularly clean the crankcase. During engine operation, high-pressure unburned gas, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from part wear to form sludge. When the amount is small, it suspends in the oil; when large, it precipitates from the oil, blocking the filter and oil holes, making engine lubrication difficult and causing wear; Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine works properly but also extends the overall lifespan of the radiator and engine.
18
1
Share

How many kilometers does the Buick New Regal need to change the transmission oil?

The New Regal requires a transmission oil change every three years or 60,000 kilometers. Failure to replace the transmission oil in time may easily lead to transmission damage. Using a circulation machine to change the transmission oil can more thoroughly replace the residual oil in the solenoid valve and torque converter. More details are as follows: 1. Transmission oil plays the roles of transmission, lubrication, cooling, and cleaning in the transmission. There are three methods to change the transmission oil. The first is gravity oil change, which is simple but may leave waste oil inside due to gravity drainage. 2. The second is circulation oil drainage. Although this method takes longer, it results in a cleaner oil change. The third is removing the transmission oil pan for an oil change, but this method involves complete disassembly and is cumbersome and complicated. 3. Currently, the better method for oil change is circulation drainage, which uses specialized transmission cleaning equipment. During the operation of the transmission, the old oil is fully circulated and thoroughly drained before adding new transmission oil, achieving an oil change rate of over 90% and ensuring a good oil change effect.
9
5
Share

What is the battery model for Nissan Sylphy key?

Nissan Sylphy car key uses a 3V CR2025 button battery. The remote key utilizes the wireless remote control function of the central locking system, allowing you to lock and unlock the doors from a distance without inserting the key into the lock. Remote keys can be categorized into three types based on their operation methods: active mode, passive mode, and coil induction mode. The system mainly consists of two parts: the transmitter and the receiver: 1. Transmitter: Composed of the transmission switch, transmission antenna (keypad), integrated circuit, etc. It includes an identification code storage circuit and an amplitude modulation circuit, with a button-type lithium battery installed on the opposite side of the circuit. The transmission frequency is selected according to the radio standards of the country of use, and the transmission switch sends a signal each time it is pressed. 2. Receiver: After the transmitter sends the identification code via shortwave modulation, it is received by the car's shortwave antenna and processed by the distributor into the receiver's electronic control unit for demodulation through the shortwave high-frequency amplification processor. The demodulated identification code is then compared; if it matches the correct code, it is input into the control circuit to activate the actuator.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.