How often should the Reiz transmission fluid be changed?

What to Do When You Can't See the Front of Your Car While Driving?

First, familiarize yourself with your vehicle by adjusting the seat and mirrors, especially the right-side mirror. Ensure the seat is comfortable and that you can operate the brake and accelerator without straining, without obstructing your view. Remember, the driver's position is not at the exact center of the vehicle. Regularly check the right side to observe the distance from the ground markings, helping you gauge your car's position.

18

4

Share

How to Open a 4S Store?

First, the qualifications and legal business credentials of the operator are preliminarily reviewed, with preference given to those with relevant experience. The operator must have a good commercial reputation. The can be downloaded from the official website of the automobile brand manufacturer. The manufacturer will conduct an initial screening based on the application materials and carry out on-site inspections. The operator must strictly adhere to the "Four-in-One" franchise model and cannot operate beyond the authorized scope. The manufacturer authorizes the franchise store for sales and maintenance.

14

4

Share

What are the symptoms of a faulty car engine ignition coil?

Ignition coil failure symptoms: Generally, the number of ignition coils corresponds to the number of cylinders in the engine. If an ignition coil is severely damaged, causing insufficient spark from the spark plug to ignite the air-fuel mixture or complete absence of spark, the engine will experience a misfire. The specific symptom is engine shaking: Due to the imbalance in power generation caused by the misfire, the engine will exhibit severe vibrations during operation. If there are too many misfiring cylinders or two adjacent power-generating cylinders misfire simultaneously, the engine is highly likely to fail to start normally.

5

Share

How to Know the Production Date of a Tire?

The production date of a car tire is generally represented by a four-digit number, where the first two digits indicate the production week and the last two digits represent the production year. Here is the relevant information: 1. The production date of a car tire is part of a series of alphanumeric characters starting with DOT, which stands for U.S. Department of Transportation certification. 2. The following numbers and letters represent the tire's origin information and factory code. 3. The last four digits indicate the production date. 4. Generally, the maximum speed on highways is controlled at 120 km/h, but as tires are continuously used, their load-bearing capacity weakens, and changes in road temperature can also reduce the maximum speed rating. Therefore, manufacturers equip tires with a speed rating several levels higher than the 120 km/h limit to ensure vehicle safety.

4

5

Share

What is the ground clearance of the Equinox?

The minimum ground clearance of the Equinox when unloaded is 199 mm, and when fully loaded, it is 170 mm. More details about the Equinox's ground clearance are as follows: 1. Minimum ground clearance: Refers to the distance from the lowest point of the chassis to the ground when the vehicle is fully loaded. The Equinox has an approach angle of 24 degrees and a departure angle of 19.2 degrees. 2. Ground clearance reflects the vehicle's ability to pass over obstacles or uneven surfaces without collision: The greater the ground clearance, the stronger the vehicle's ability to pass over obstacles or uneven surfaces; the smaller the ground clearance, the weaker this ability. 3. The ground clearance of the new Equinox has become smaller: The new Equinox features a front MacPherson strut and rear multi-link suspension combination, with an approach angle of 19°, a departure angle of 23°, and a minimum ground clearance of 158 mm.

20

0

Share

What is the ground clearance of the Honda CRV?

Honda CRV's minimum ground clearance when fully loaded is 135mm, and the ground clearance when unloaded is 185mm. Here is some relevant information: 1. Minimum ground clearance refers to the distance between the lowest point of the car (excluding the wheels) and the road surface when the car is fully loaded. It indicates the car's ability to overcome obstacles (such as stones, etc.). The smaller the ground clearance, the worse the ability to overcome obstacles. 2. The larger the minimum ground clearance, the stronger the vehicle's ability to pass over obstacles or uneven ground, but the higher the center of gravity, which reduces stability; the smaller the minimum ground clearance, the weaker the vehicle's ability to pass over obstacles or uneven ground, but the lower the center of gravity, which can increase stability.

3

5

Share

How often should the Reiz transmission fluid be changed?

What to Do When You Can't See the Front of Your Car While Driving?

How to Open a 4S Store?

What are the symptoms of a faulty car engine ignition coil?

How to Know the Production Date of a Tire?

What is the ground clearance of the Equinox?

What is the ground clearance of the Honda CRV?

Is a Cold Tire Pressure of 2.0 Normal in Summer?

How to Transfer Vehicle Registration to Another Location?

What causes the steering wheel warning light to illuminate in a vehicle?

How to Tighten the Handbrake of a Small Car?