How Often Should the Power Steering Fluid Be Changed in the Trumpchi GM8?

Can You Drive Immediately After Adding Coolant?

You can start the vehicle immediately after adding coolant. Methods for selecting coolant: The basic indicators of coolant are freezing point and boiling point. In the market, coolants are available with freezing points of -15°C, -25°C, -30°C, -40°C, etc. Generally, it is advisable to choose a coolant with a freezing point at least 10°C lower than the lowest temperature in your region. Methods to determine if coolant is insufficient: Observe the coolant warning light on the dashboard. If it lights up, it is likely due to insufficient coolant, although it could also be caused by excessively high cylinder temperature. Check the coolant reservoir. If the liquid level is below the minimum mark (MIN), do not continue driving; add coolant promptly. Check the water level scale markings on the coolant tank. The normal coolant level should be between the maximum and minimum marks. To determine if coolant is insufficient, observe the scale. If the coolant level is below the minimum mark, it indicates a shortage of coolant.

20

3

Share

What Causes Car Shaking After Adding Fuel Additive?

Occasional body shaking occurs because the fuel containing the additive gathers deposits and carbon buildup in bottleneck areas of the fuel system, causing localized blockages that disrupt fuel supply. Below is an explanation of car shaking after adding fuel additive: 1. The fuel additive is actually working, which is a normal phenomenon. This effect will gradually diminish after using 3-5 tanks of fuel containing the additive; 2. Due to the cleaning effect of the fuel additive on the fuel intake system, deposits and carbon buildup on the fuel injectors, intake valves, and intake manifolds are gradually cleaned off. These deposits and carbon enter the combustion chamber along with the gasoline, but some may not burn completely, occasionally causing black smoke from the exhaust pipe; 3. While driving, gasoline containing the additive enters the fuel intake system, automatically cleaning it and gradually removing deposits. This helps maintain optimal spray patterns in the fuel injectors, ensuring complete fuel combustion, improved thermal efficiency, and fuel savings. For new cars, the fuel additive helps keep the fuel intake system unobstructed and clean, maintaining the vehicle's fuel consumption at the best level.

19

4

Share

What Causes a Car to Not Start After Refueling?

The fuel pump fails to cool, leading to fuel pump ablation. Below are related explanations for why a car may not start after refueling: 1. Incorrect Gear Position: When starting an automatic transmission car, the gear must be in P (Park) or N (Neutral). If it's in R (Reverse) or D (Drive), the car won't start, posing potential safety hazards. If the car wasn't left in P when parked, the driver might overlook this issue upon returning. Most modern vehicles display a reminder on the dashboard, and some may also have a buzzer, making this scenario rare. 2. Steering Wheel Lock: If the steering wheel isn't straightened when parked and is at a significant angle (e.g., over 30 degrees), the steering wheel may automatically lock as an anti-theft feature. This can make the key difficult to turn, preventing ignition. 3. Clogged Fuel Filter: A partially or fully clogged fuel filter can restrict fuel supply, impede fuel return, and increase fuel system pressure, resulting in an overly rich air-fuel mixture. This condition may cause the car to fail to start or exhibit jerking movements while driving.

2

4

Share

How many points are deducted for speed and gear mismatch during gear shifting?

In the third subject of the driving test, a mismatch between speed and gear directly results in a deduction of 10 points. Below are the relevant details about the gear shifting project in Subject 3: 1. Downshifting operation: When the speed slows down, you can shift to fourth gear when it drops below 50 mph, to third gear when it drops below 40 mph, to second gear when it drops below 30 mph, and to first gear when it drops below 20 mph; 2. Upshifting must be done one gear at a time, and downshifting must also follow the instructions. Since the vehicle speedometer may show a slight difference from the actual speed, candidates should perform the gear shift when the speed is slightly higher or lower than indicated on the speedometer; 3. The gear shifting project has specific time requirements. Shifting gears too slowly or depressing the clutch for too long will generally result in failure. During the practice session at the test site, candidates should memorize the gear shifting process. During the actual test, when the test vehicle enters the gear shifting project, candidates can adjust the vehicle speed in advance to approach the shifting speed. When the voice prompt is given, they can quickly perform the gear shift.

15

5

Share

What Causes the Feeling of Jerking Acceleration as if Not Supplying Fuel?

There can be many reasons for this situation. First, it could be an issue with fuel quality. Additionally, it is necessary to check the vehicle's intake system, fuel system, spark plugs, and ignition coils. Some vehicles may experience jerking sensations due to carbon buildup. Below are some related reasons for the feeling of jerking acceleration as if not supplying fuel: 1. Carbon buildup in the engine and intake manifold: Carbon deposits can absorb a certain amount of fuel, causing the ECU to make incorrect judgments. For example, if the computer controls the injection of 100 units of fuel-air mixture, but only 90 units actually enter the cylinder because 10 units are absorbed by carbon deposits, even if the remaining 90 units burn completely, the required power output is not achieved, leading to unavoidable jerking. 2. Ignition system failure: Aging of the ignition system can weaken the ignition energy, causing the ignition coils or spark plugs to fail to ignite continuously or to experience interruptions during ignition. Intermittent ignition results in uneven power output, leading to jerking sensations during acceleration. Therefore, it is important to focus on the maintenance and replacement of the ignition system during daily vehicle use. If a spark plug fails while driving, it can easily cause an engine misfire, severely affecting the engine's lifespan.

5

3

Share

What is the difference between 9AT and 6AT?

The difference between 9AT and 6AT is: the 9AT transmission has more gears, and its transmission efficiency is higher than that of the 6AT transmission, while also offering better fuel economy. More details are as follows: 1. The AT transmission is the most mature and widely used transmission, providing smoother gear shifts and better reliability and stability. 2. The AT transmission relies on planetary gears for speed and torque changes, and it contains many planetary gears inside. There are three common types of automatic transmissions: AT transmission, CVT transmission, and dual-clutch transmission. 3. The dual-clutch transmission is currently a popular transmission type, known for its high transmission efficiency and fast gear shifts. Its structure is similar to that of a manual transmission, with the addition of a gear-shift control mechanism and an extra clutch. One clutch controls the odd-numbered gears, while the other controls the even-numbered gears. 4. The CVT transmission has a different structure compared to conventional transmissions. It consists of two cone pulleys and a steel belt, providing smooth gear shifts and good reliability and stability. The CVT transmission allows the engine to maintain an optimal RPM range, thereby improving the vehicle's fuel efficiency.

1

Share

How Often Should the Power Steering Fluid Be Changed in the Trumpchi GM8?

Can You Drive Immediately After Adding Coolant?

What Causes Car Shaking After Adding Fuel Additive?

What Causes a Car to Not Start After Refueling?

How many points are deducted for speed and gear mismatch during gear shifting?

What Causes the Feeling of Jerking Acceleration as if Not Supplying Fuel?

What is the difference between 9AT and 6AT?

Is There a Time Limit for Gear Shifting?

Does the Hongqi H5 meet China 6 emission standards?

What is the difference between natural gas vehicles and gasoline vehicles?

What is the difference between different gasoline grades?