How Often Should the Power Steering Fluid Be Changed for Changan CS55?

1 Answers
DelGemma
07/30/25 3:51am
Changan CS55 power steering fluid is generally changed every 2 years or every 30,000 kilometers driven. Below is relevant information about power steering fluid: 1. Function: Power steering fluid automatically provides power to the steering system when the driver turns the wheel, thereby reducing the driver's steering effort. It is a medium oil added to the power steering system, serving to transmit steering force and provide cushioning. 2. Classification: Common types of power steering fluid include brake power steering fluid, steering power steering fluid, and clutch power steering fluid.
Was this review help?
4
1
Share
More Forum Discussions

What are the steps for charging at an electric vehicle charging station?

Set the power gear to OFF, unlock the entire vehicle, and open the cover and protective cap of the AC charging socket. Connect the charging plug provided with the charging station to the vehicle socket, follow the instructions on the charging equipment to operate, and start charging. The dashboard will light up the charging connection indicator and display the charging screen. Charging can be ended once the battery is fully charged.
1
4
Share

How many kilometers should car spark plugs be replaced?

Car spark plugs should be replaced every 20,000 kilometers. To determine whether spark plugs need replacement, they should be removed for inspection to observe their color, the gap between electrodes, and whether there's air leakage at the gap between the ceramic and metal shell. If removal is inconvenient, you can also check if the car has difficulty starting when cold or if there's a noticeable decline in engine performance. These symptoms likely indicate that the spark plugs need replacement. Precautions for spark plug usage: 1. There are many types of spark plugs, each with its own economic lifespan. Continuing to use them beyond this lifespan may adversely affect the engine's power and fuel efficiency; 2. During use, normal carbon deposits will form on the electrodes and the skirt insulator of the spark plug. If these deposits are not cleaned over time, they can accumulate, eventually leading to electrode leakage or failure to spark; 3. When spraying silver powder or performing other maintenance on the engine, pay attention to keeping the spark plugs clean, as dirt on the surface can cause leakage; 4. Do not use fire to clean carbon deposits and oil stains from the electrodes and skirt of the spark plug, as the temperature is hard to control during burning, which can easily crack the skirt insulator and cause spark plug leakage.
15
3
Share

How to Drive a Corolla Automatic Transmission?

Inspect the vehicle by walking around it to check if any of the four tires are underinflated or punctured, then insert the key and start the ignition. After the engine has been running for about 1-2 minutes, press the brake pedal with your right foot, shift the gear to D (Drive), release the handbrake, and then slowly lift your right foot to start driving. When encountering traffic congestion or a red light while driving, simply press the brake pedal to stop the vehicle without needing to change gears.
15
0
Share

What are the steps for driving an automatic transmission vehicle?

Driver sits in the driver's seat, presses the brake pedal, and pushes the start button to ignite and start the engine. Release the foot brake, warm up the vehicle while stationary, then press the brake pedal again and shift to D gear. Release the handbrake and slowly release the brake pedal to start moving.
6
4
Share

How to Remove and Install the Honda Lingpai Center Console Screen?

Pry off the black frame around the main unit carefully to avoid breaking it with excessive force. Remove the fixing screws around the main unit, being cautious not to drop them into the gaps of the center console. Take out the main unit and disconnect the wiring harness at the back.
3
4
Share

How to Replace the Battery in a Refine S3 Key

There are two screws on the back cover of the car key. Use a screwdriver to remove each screw separately, then open the back cover to reveal the battery compartment. Remove the old battery, install the new battery, then reattach the back cover and tighten the screws.
20
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.