How often should the Mondeo's cabin air filter be replaced?

What Are the Factors Affecting the Lifespan of a Car Battery?

Factors affecting the lifespan of a car battery are as follows: 1. Deep Discharge: The molar volume of lead sulfate is larger than that of lead oxide, causing the active material to expand during discharge. The conversion of one mole of lead oxide to one mole of lead sulfate results in a 95% increase in volume. The bonds between lead dioxide molecules are inherently weak, and during discharge, the expansion of the active material on the positive plate causes the lead dioxide particles to gradually loosen. In the case of deep discharge, the volume expansion is even greater, making the active material more prone to detachment. 2. Overcharging: Charging a battery electrolyzes water into oxygen and hydrogen. Severe overcharging leads to a significant release of oxygen. Due to its strong oxidizing properties, the released oxygen can corrode the plates, causing the active material to detach and reducing the battery's lifespan. 3. Excessive Temperature: A battery's capacity increases with temperature. If the battery temperature rises while the total discharge remains unchanged, the depth of discharge decreases. A temperature increase up to 45°C is beneficial and can extend the battery's lifespan. However, during charging, if the battery temperature exceeds 50°C, it accelerates the corrosion of the plates by the acid and hastens the aging of the battery casing due to the higher temperature. 4. Sulfuric Acid Corrosion: Increasing the sulfuric acid density in the battery's electrolyte boosts the positive plate's capacity, thereby increasing the battery's overall capacity. However, it also increases self-discharge, accelerates plate corrosion, promotes the loosening and detachment of lead dioxide, and increases corrosion of the battery terminals, ultimately reducing the battery's lifespan.

11

0

Share

How to Turn on the Car Air Conditioning for Cooling?

To turn on the car air conditioning for cooling, follow these steps: 1. The car air conditioning system mainly consists of a refrigeration system, heating system, air supply system, and control system. Depending on the structural type and intended use of the vehicle, the composition and arrangement of the car air conditioning system may vary. Currently, most cars use an integrated heating and cooling air conditioning system. 2. Start the car, turn on the fan, press the A/C button, and adjust the temperature to a low setting. 3. The refrigerant absorbs a large amount of heat from the surrounding environment. The low-temperature, low-pressure gaseous refrigerant is then drawn back into the air conditioning compressor to begin the next cooling cycle. This process repeats continuously, gradually lowering the temperature inside the car.

10

2

Share

Where is the license plate with 'Zhe X' from?

There is no license plate with 'Zhe X'. Here are the specific details about car license plates: 1. Currently, the existing license plate codes for Zhejiang Province include: Zhe A for Hangzhou, Zhe B for Ningbo, Zhe C for Wenzhou, Zhe D for Shaoxing, Zhe E for Huzhou, Zhe F for Jiaxing, Zhe G for Jinhua, Zhe H for Quzhou, Zhe J for Taizhou, Zhe K for Lishui, and Zhe L for Zhoushan. 2. The registration authority code for motor vehicles consists of 2 characters, which are a combination of Chinese characters and English letters. The Chinese character is the abbreviation of the province, autonomous region, or municipality directly under the central government, and the English letter is the code of the vehicle management office. For car license plates, the registration authority code is located in the center at the top of the plate, with the Chinese character and English letter arranged horizontally; for motorcycle license plates, the registration authority code is located on the left side of the plate, with the Chinese character and English letter arranged vertically.

2

4

Share

How to Determine When to Replace the Stabilizer Bar Bushing

There is no fixed replacement cycle for stabilizer bar bushings. Generally, they need to be replaced when they are damaged. Here are the specific details about stabilizer bar bushings: 1. The symptom of a damaged stabilizer bar bushing is a noise when the car goes over bumps or rough roads. At this time, it is necessary to check whether the stabilizer bar bushing is damaged. It could also be caused by the rubber hardening due to low winter temperatures. You can loosen the screws and use a screw loosening agent to lubricate the stabilizer bar bushing and the rubber part of the hanger. 2. The function of the stabilizer bar bushing is to fix the stabilizer bar and cushion its pressure. Damage to the bushing will affect the stability of the car, such as front wheel misalignment and longer braking distance. When the bushing is damaged or hardened, the chassis will make abnormal noises.

6

4

Share

Where is the position light located?

The position lights of a sedan are the red lights located at the outermost left and right sides of the rear. At night, after turning on the headlights, if you step out of the car and observe, you will see the red lights at the outermost left and right sides of the rear illuminated; these are the position lights. Content extension: 1. Position lights are somewhat similar to the anti-collision lights installed at the wingtips of aircraft, mainly used to indicate the width and height of the vehicle during driving in conditions such as dusk, overcast days, rain, or fog. This helps other vehicles determine their relative positions and sizes during encounters or overtaking. Typically, the color of position lights is white at the front and red at the rear. 2. Position lights are also known as car marker lights and have other names such as width lights and evening driving lights. Position lights are installed at the highest points at the front and rear of the vehicle.

10

0

Share

Is It Normal for Water to Come Out of a Car's Exhaust Pipe?

It is a very normal phenomenon for the exhaust pipe to drip water in winter. After gasoline is completely burned, it produces water and carbon dioxide. Water exists as steam in a high-temperature environment, but when it comes into contact with the cooler exhaust pipe, the steam condenses into liquid water. Therefore, it is natural for some cars' exhaust pipes to drip water in winter. The following are the criteria for judging whether the water dripping from a car's exhaust pipe is normal: 1. Correct air-fuel mixture ratio: When the vehicle's air-fuel mixture ratio is correct, water dripping from the exhaust pipe is normal. Whether it is an electronic fuel injection or a carburetor engine, a correct air-fuel mixture ratio indicates that the vehicle's compression ratio is normal, and fuel consumption is within the normal range. 2. Normal engine cylinder pressure: When the vehicle's exhaust pipe drips water normally, it indicates that the engine cylinder pressure is normal, and it also shows that there is no wear in the engine cylinder block. The various parts inside the engine can also work normally. This method can be used to determine whether the fuel is burning normally. 3. Normal exhaust temperature: Normal water drainage from the vehicle's exhaust pipe also indicates that the exhaust temperature is normal, showing that the engine's power output is stable.

17

1

Share

How often should the Mondeo's cabin air filter be replaced?

What Are the Factors Affecting the Lifespan of a Car Battery?

How to Turn on the Car Air Conditioning for Cooling?

Where is the license plate with 'Zhe X' from?

How to Determine When to Replace the Stabilizer Bar Bushing

Where is the position light located?

Is It Normal for Water to Come Out of a Car's Exhaust Pipe?

What brand has a logo that looks like an 'h'?

Where is the Wiper Switch Located?

How Often Should Ignition Coils Be Replaced?

What Lights to Use When Driving in Fog?