How often should the manual transmission fluid be changed for the Excelle?

2 Answers
DiReese
07/29/25 3:39am
Manual transmission fluid generally needs to be replaced every 30,000 kilometers. More information about the Excelle transmission is as follows: 1. When changing transmission fluid, it must be replaced with the same type as the original. Manual transmission vehicles can only use manual transmission fluid, while automatic transmission vehicles require automatic transmission fluid. 2. Failing to replace the transmission fluid regularly can directly affect the vehicle's performance, fuel consumption, and even the lifespan of the transmission. Therefore, regular transmission maintenance is particularly important. 3. Different car manufacturers have varying maintenance schedules, so the specific replacement interval should follow the manufacturer's recommendations.
Was this review help?
12
3
Share
DelBrody
08/12/25 7:28am
I'm a car enthusiast and have been driving manual transmissions for years. The recommended interval for changing the Buick Excelle's transmission fluid is generally every 60,000 to 80,000 km or about 4 years, depending on usage. Manual transmission fluid doesn't require changing as frequently as automatic, but over time the fluid degrades, reducing lubrication effectiveness, which increases gear wear and causes rough shifting. High-speed driving or frequent gear changes accelerate wear, so regular inspections are advised. From my personal experience, if you do lots of highway driving or frequently encounter city traffic jams, changing it every 70,000 km provides better peace of mind. Always consult the official manual, as requirements may vary for specific model years. Don't wait until you hear strange noises or experience shifting difficulties - preventive maintenance is far more cost-effective.
Was this review help?
11
5
Share
Expand All
More Forum Discussions

Should the Automatic Parking Gear Be Placed in D or N?

When waiting at a red light for an extended period, it is advisable to shift to N gear for automatic parking; for short waits, D gear can be used. Below are the advantages of using N gear: 1. Fuel efficiency: Shifting from N to D gear involves a process where the engine's RPM first decreases and then recovers. This occurs because, after shifting to D gear, the engine attempts to move the car forward. However, since the brake pedal is pressed, preventing movement, all the engine's input energy is consumed by the torque converter. This causes the engine's RPM to drop below idle speed, prompting the ECU to inject more fuel, thereby increasing fuel consumption. 2. Protects the torque converter: When parked in D gear, all the engine's output energy is consumed by the torque converter, raising its temperature and degrading the fluid quality, which shortens its lifespan. Therefore, it is recommended to shift to N gear. 3. Smoother operation when parked in N gear: If the brake is released directly when restarting the car, the vehicle may jerk noticeably, causing discomfort to passengers. Shifting to N gear before stopping and then switching to D gear when starting ensures a smoother engine start. 4. Safer parking in N gear: Parking in D gear requires continuously pressing the brake pedal for an extended period. During this time, a distracted driver may forget the car is still in drive gear. Accidentally releasing the brake could lead to the car rolling or lurching forward, posing a safety risk.
6
3
Share

What does the 'V' on car tires represent?

Car tires marked with 'V' represent the speed rating of the tire. The speed rating indicates the maximum speed at which the tire can carry a specified load under defined conditions, with 'V' corresponding to a maximum speed of 240 kilometers per hour. Different tire specifications support varying maximum speeds. Car tires are one of the essential components of a vehicle, directly contacting the road surface and working in conjunction with the car's suspension to mitigate impacts during driving. They ensure good ride comfort and smooth driving, maintain excellent adhesion between the wheels and the road surface, enhance the vehicle's traction, braking, and off-road capabilities, and bear the weight of the car.
7
2
Share

When did the China III standard start?

The China III standard was implemented on July 1, 2008. The China III standard refers to China's third-stage vehicle emission standards, which are equivalent to the Euro III emission standards in terms of tailpipe pollutant levels. The key difference is that new vehicles must be equipped with an OBD (On-Board Diagnostics) system. China's emission standards are categorized as: China I, China II, China III, China IV, China V, and China VI. The China VI emission standard is implemented in two phases: Phase I requires all sold and registered vehicles to comply with the China VI A standard starting from July 1, 2020; Phase II requires all sold and registered vehicles to comply with the China VI B standard starting from July 1, 2023.
7
0
Share

What is the Audi fv7203baddg?

Audi fv7203baddg is the Audi A4L. While the exterior of the Audi A4L continues the straight and steady style of the previous generation, the improvements in details, such as the headlight design and the more rigid, three-dimensional body lines, make it look sharper and more eye-catching. The Audi A4L is a mid-size sedan produced by FAW-Volkswagen Audi, featuring a five-link independent suspension system for both the front and rear chassis. In terms of dimensions, the car measures 4858mm in length, 1847mm in width, and 1439mm in height, with a wheelbase of 2908mm. It is powered by a 2.0T turbocharged engine and paired with a 7-speed dual-clutch transmission.
12
4
Share

How Long Can a Toyota Vios Engine Last?

Toyota Vios engines are not consumable parts and generally do not require replacement as long as they are properly maintained and no accidents occur. An engine is a machine that converts other forms of energy into mechanical energy, including internal combustion engines, external combustion engines, jet engines, electric motors, etc. The term 'engine' can refer to both the power-generating device and the entire machine that includes the power unit. The Toyota Vios is a compact car under FAW Toyota, featuring a MacPherson strut front suspension and a torsion beam rear suspension. In terms of dimensions, the car measures 4435mm in length, 1700mm in width, and 1490mm in height, with a wheelbase of 2550mm. It is powered by a 1.5L naturally aspirated engine paired with a 5-speed manual transmission.
17
0
Share

How many liters of engine oil does the Sylphy Classic require?

The Sylphy Classic requires 3 to 4 liters of engine oil. Engine oil serves multiple functions including lubrication and wear reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, as well as shock absorption. Engine oil consists of base oil and additives - the base oil being the primary component that determines the fundamental properties of the lubricant, while additives compensate for and enhance the performance limitations of the base oil. The Sylphy Classic measures 4641mm in length, 1815mm in width, and 1447mm in height, with a wheelbase of 2712mm. The vehicle comes equipped with numerous convenience features such as a tri-color reversing camera, 6-disc DVD entertainment system, and memory power seats.
18
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.