How Often Should the Magotan Spark Plugs Be Replaced?

1 Answers
DelKathryn
07/29/25 5:43pm
Magotan spark plugs should be replaced every 30,000 kilometers. Methods to determine if spark plugs are damaged: Remove the spark plugs and observe them. The condition of the spark plugs can be judged based on their appearance and color. Normal spark plugs have a skirt and electrodes that appear gray-white, gray-yellow, or light brown. A properly functioning spark plug has a skirt that is reddish-brown, with an electrode gap between 0.8-0.9mm and no signs of electrode burn. If the spark plugs are covered in oil or deposits but are not damaged, they can continue to be used after cleaning off the oil and deposits. If the spark plugs are severely damaged, with signs such as blistering at the top, black streaks, cracks, or melted electrodes, the cause of the damage should be identified. After troubleshooting, replace the spark plugs with new ones. Additionally, if the spark plugs appear black as if smoked, it indicates that the wrong heat range was selected or that the air-fuel mixture is too rich, or that engine oil is leaking into the combustion chamber.
Was this review help?
8
5
Share
More Forum Discussions

How to Shift Gears Without Using the Clutch?

This method is only recommended when the clutch is malfunctioning. Older vehicles with worn-out gears and slightly larger gaps make it easier to achieve. It's more challenging with newer cars. The key points are mastering the speed, making accurate judgments, and executing the operation decisively to avoid the unpleasant grinding sound. Below is an introduction to shifting gears without using the clutch: Upshifting without the clutch: At 40km/h, you can drive in either 2nd or 3rd gear. In 2nd gear, the RPM is around 2000, while in 3rd gear, it's around 1500. Accelerate the car in 2nd gear to 40km/h, then release the throttle without pressing the clutch. Shift the gear to neutral and wait for the RPM to drop to 1500. At this point, you can easily shift to 3rd gear to complete the upshift. Downshifting without the clutch: At 40km/h, you can drive in 3rd gear at 1500 RPM or 2nd gear at 2000 RPM. When upshifting from 2nd to 3rd, you can wait for the RPM to drop before shifting to a lower gear. For downshifting from 3rd to 2nd, since the original RPM is only 1500 and you need to increase it to 2000 to shift to 2nd gear, simply shift to neutral and lightly press the throttle. Wait for the RPM to drop to around 2000, then you can easily shift to 2nd gear to complete the downshift.
7
4
Share

What does the V12 in the BMW 7 Series engine mean?

The V12 in the BMW 7 Series engine refers to a 6.6-liter, 12-cylinder, twin-turbocharged engine arranged in a V configuration. This engine delivers a maximum horsepower of 585 PS, a maximum power output of 430 kW, and a peak torque of 850 Nm. The maximum power is achieved at engine speeds between 5,250 and 5,750 rpm. It features direct fuel injection technology and utilizes an aluminum alloy cylinder head and block. The engine is paired with an 8-speed automatic transmission (8AT). The BMW 7 Series is a large luxury vehicle under the BMW brand, with dimensions of 5,212 mm in length, 1,902 mm in width, and 1,478 mm in height, and a wheelbase of 3,210 mm. The interior highlights include a new 12.3-inch full LCD instrument cluster and the latest iDrive 7.0 multimedia system.
18
1
Share

What is the chassis code of the BMW 7 Series?

The chassis code of the BMW 7 Series is G11 and G12. The chassis refers to the assembly consisting of the transmission system, running gear, steering system, and braking system in a car. Its function is to support and install the car engine and its various components, forming the overall shape of the car, receiving the engine's power to enable the car to move and ensure normal driving. The BMW 7 Series is a large luxury car under the BMW brand, with a length, width, and height of 5212mm, 1902mm, and 1478mm respectively, and a wheelbase of 3210mm. The interior of the car features a black-and-white contrast color scheme to enhance brightness. Components such as the front and rear seats, door panels, center console, and dashboard are all adorned with contrast-stitched Merino White Gold full-grain leather, creating a noble and luxurious interior space.
11
0
Share

What is the ground clearance of the BMW 7 Series?

The ground clearance of the BMW 7 Series is approximately 120 millimeters. Ground clearance refers to the distance between the lowest point of the vehicle (excluding the wheels) and the supporting surface when the car is fully loaded and stationary. It is used to indicate the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. The ground clearance value of a car is not fixed and depends on the load condition. The BMW 7 Series is a large luxury sedan under BMW, with dimensions of 5212mm in length, 1902mm in width, and 1478mm in height, and a wheelbase of 3210mm. The car is equipped with four engines: a 2.0-liter turbocharged engine, a 3.0-liter turbocharged engine, a 4.4-liter twin-turbocharged V8 engine, and a 6.6-liter V12 twin-turbocharged engine.
19
1
Share

How many cylinders does the BMW 7 Series engine have?

BMW 7 Series engines come in inline 4-cylinder, inline 6-cylinder, V8, and V12 configurations. The vehicle utilizes four types of engines: a 2.0-liter turbocharged engine, a 3.0-liter turbocharged engine, a 4.4-liter twin-turbocharged V8 engine, and a 6.6-liter V12 twin-turbocharged engine. The BMW 7 Series is a large luxury sedan under the BMW brand, with dimensions of 5212mm in length, 1902mm in width, and 1478mm in height, and a wheelbase of 3210mm. The hybrid system employed in this vehicle can directly power the electric motor to assist with vehicle start-up or acceleration, while also ensuring the normal operation of functions such as air conditioning, ventilation, and entertainment when the engine is turned off.
4
0
Share

What is the chassis code for the BMW 8 Series?

The chassis codes for the BMW 8 Series are G14, G15, and G16. The G14 is the convertible model; the G15 is the two-door coupe; and the G16 is the four-door model. Chassis codes are named according to the manufacturer's internal numbering system. The same car model can have different chassis codes depending on the year and variant. The BMW 8 Series is a large GT sports car with dimensions of 5088mm in length, 1932mm in width, and 1410mm in height, with a wheelbase of 3023mm. The car's side profile features a more elongated body proportion and a silhouette that leans towards traditional sedans. The smooth, sloping roofline, combined with the robust body shape, makes the side windows and cabin area appear relatively small.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.