How often should the Lynk & Co 02 transmission fluid be changed?

3 Answers
MaximusDella
07/29/25 7:20pm
Normally, the transmission fluid should be replaced after driving more than 60,000 kilometers. Please refer to the vehicle's maintenance manual for specific requirements. Below is some relevant information: 1. The drain plug and fill plug for this vehicle are both located on the transmission oil pan. First, drain all the transmission fluid, then use a specialized machine to add fluid through the drain plug on the oil pan. Start by adding 2 liters, then start the engine. Continue adding until fluid flows out from the transmission oil pan. 2. The Lynk & Co 02 Yao PRO is equipped with a 1.5TD turbocharged engine developed by Volvo, paired with a 7-speed dual-clutch transmission. It delivers a maximum power of 132kW and a maximum torque of 265N.m. The combined fuel consumption is 6.5L/100km, urban fuel consumption is 8.6L/100km, and suburban fuel consumption is only 5.5L/100km.
Was this review help?
14
1
Share
DiGarrett
08/14/25 1:58pm
The transmission oil change interval for the Lynk & Co 02, based on my personal experience, is every 60,000 kilometers or approximately every 3-4 years. Why this schedule? Because transmission oil degrades under high temperatures and frequent gear shifts, losing its lubrication and cooling functions. Over time, this can lead to transmission slippage, increased noise, or even complete failure. Imagine driving when suddenly the gears get stuck—that's extremely dangerous! Regular oil changes not only protect this vital component of your car but can also extend its lifespan by over a decade. I recommend developing the habit of checking the oil's color every six months; if it darkens or develops a foul odor, it's time for a change. Visit an authorized service center and use the manufacturer-recommended oil to ensure professional handling. In short, don't skimp on this small expense—prevention is better than repair, saving you thousands in potential repair costs.
Was this review help?
1
3
Share
Expand All
DeTimothy
10/15/25 4:42am
As someone who has been working with transmissions for years, I believe the transmission fluid change interval for the Lynk & Co 02 depends on actual driving conditions. Generally, automatic transmission fluid is recommended to be replaced every 70,000 kilometers or approximately 4 years. In congested urban roads or during aggressive driving, fluid deterioration accelerates, requiring earlier replacement at around 60,000 kilometers. Aged transmission fluid can cause malfunctions such as gear shift jerking, oil leaks, or overheating, which can seriously damage the vehicle. The simplest method is to have the fluid quality tested at a professional shop - if it appears cloudy or has a burnt smell, immediate action is safest. Delaying fluid changes accelerates component wear, potentially leading to major repairs costing nearly 10,000 yuan. Adding lubrication checks during maintenance can keep your car running smoother.
Was this review help?
3
2
Share
Expand All
More Forum Discussions

What is the method to reset the maintenance light on the JAC Refine S3?

The method to reset the maintenance light on the JAC Refine S3 is: turn off the ignition switch, press and hold the adjustment lever at the lower right of the instrument panel, and then turn on the ignition switch to reset. The functions of the maintenance light are: 1. Record the mileage of important components; 2. Remind the owner to perform maintenance. The JAC Refine S3 is a compact SUV with body dimensions of: length 4345mm, width 1765mm, height 1640mm, wheelbase 2560mm, and a fuel tank capacity of 45L. It is equipped with a 1.5L naturally aspirated engine, with a maximum power of 85kW and a maximum power speed of 6000rpm.
19
1
Share

What colors are available for the Geometry A car?

Geometry A car comes in the following colors: 0° White, 11° Silver, 18° Gold, 26° Blue, and 100° Red. The Geometry A is a pure electric compact car with the following body dimensions: length 4736mm, width 1804mm, height 1503mm, wheelbase 2700mm, and a trunk capacity of 430L. It uses 205/60R16 tires. The car is equipped with a front-mounted ternary lithium battery, with a total motor power of 120kW and a total motor torque of 250Nm. It is paired with a fixed gear ratio transmission and features a MacPherson independent front suspension and a torsion beam non-independent rear suspension.
6
3
Share

How to Set One-Touch Up/Down for the Avalon?

The method to set one-touch up/down for the Avalon is: 1. Start the vehicle, press down or lift the button to the first position, and release when reaching the desired position; 2. Press or lift the button firmly to the second position for automatic rising or descending. The Avalon is a mid-size sedan with body dimensions of length 4975mm, width 1850mm, height 1450mm, a wheelbase of 2870mm, and a fuel tank capacity of 60 liters. It is equipped with a 2.5L naturally aspirated engine, delivering a maximum power of 154kW at 6600rpm and a maximum torque of 250Nm.
2
5
Share

How to Replace Brake Pads with an Electronic Parking Brake?

Electronic parking brake replacement of brake pads method is: 1. Use a jack to lift the front part of the car; 2. Use tools to remove the tire; 3. Unscrew the caliper screws, remove the damaged brake pads and replace them. The electronic parking brake is a technology that achieves parking braking through electronic control. The working principle of the electronic parking brake is: 1. Parking is achieved through the friction clamping between the brake shoe and the brake hub or between the friction plate and the brake disc; 2. The control method replaces the original manual operation and mechanical linkage with electronic buttons and motors. The full name of this system is the electronically controlled mechanical parking brake system.
19
3
Share

Do Automatic Headlights Need to Be Turned Off After the Engine Is Off?

Automatic headlights do not need to be turned off after the engine is off. The method to activate automatic headlights is: adjust the combination switch of the car lights to the auto position. The function of automatic headlights is: when the light becomes dim during driving, the headlights will automatically turn on, and when the light becomes bright, they will automatically turn off. The working principle of automatic headlights is: the photosensitive sensor forms a voltage signal based on changes in external light, which is fed back to the automatic headlight control module. After data analysis, it determines whether the lights should be turned on. The maintenance methods for automatic headlights are: 1. Regularly check the lamp cover to avoid water droplets; 2. Prevent impact from foreign objects.
9
5
Share

How to Adjust the Rearview Mirror of the Tiguan?

The method to adjust the rearview mirror of the Tiguan is: Press the circular button next to the door corresponding to the rearview mirror, then adjust the mirror up, down, left, or right as needed. The functions of the rearview mirror are: 1. To prevent traffic safety accidents and ensure personal safety; 2. To expand the driver's field of vision. The Tiguan is a compact SUV with the following dimensions: length 4506mm, width 1809mm, height 1685mm, wheelbase 2684mm, and a fuel tank capacity of 63 liters. It is equipped with a 1.8T turbocharged engine, with a maximum power of 118kW and a maximum power speed range of 4500 to 6200 rpm.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.