How often should the Lavida be serviced?

2 Answers
LeSpencer
07/24/25 12:33am
Volkswagen Lavida requires a minor service every 5,000 kilometers, which includes changing the engine oil and oil filter. A major service is recommended when the vehicle reaches 45,000 kilometers. During this service, the following parts should be replaced: engine oil, oil filter, air filter, fuel filter, cabin air filter, and spark plugs. Here is some information about car maintenance: 1. Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of a car, also known as car servicing. 2. Car maintenance mainly includes servicing the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. 3. The purpose of car maintenance is to keep the car clean, ensure normal technical conditions, eliminate potential hazards to prevent failures, and slow down the deterioration process to extend the service life.
Was this review help?
12
3
Share
LeRiley
08/10/25 8:18pm
I've been driving a Lavida for seven years, and maintenance really depends on driving habits. Generally speaking, every 7,500 to 10,000 kilometers or once a year is fine. If you're the type who's stuck in city traffic every day, putting a lot of strain on the car, it's better to go earlier, say around 5,000 kilometers, to check the engine oil and air filter. If you often drive on highways, you can stretch it to 10,000 kilometers. Weather also plays a big role; in summer, the heat can easily cause the engine to overheat, and in winter, the cold makes the oil more viscous. Keeping a reasonable interval can save you hassle and money while extending the car's lifespan. Don't underestimate this—my friend slacked off for a month and ended up spending 5,000 on repairs.
Was this review help?
7
0
Share
Expand All
More Forum Discussions

Does the Volkswagen Sagitar have a keyhole?

Sagitar's one-button start does not have a keyhole; it uses an intelligent keyless system. As long as the driver carries the smart key and enters the vehicle, the one-button start will replace the key and perform all its functions. The starting method and the location of the Sagitar's mechanical keyhole are as follows: Starting method: There is a small silver protruding button on the remote key. Press it, and the mechanical key will pop out. In case of a dead battery, the mechanical key can be used to open the driver's door and lock the car. Behind the driver's door handle, there is a plastic cover with a keyhole inside. Below the plastic cover, there is a hole where the mechanical key can be inserted to pry open the cover. Location of the Sagitar's mechanical keyhole: Both the driver and front passenger doors have keyholes. For aesthetic reasons, Volkswagen has hidden the keyholes in current models. A small plastic cover behind the door handle conceals the keyhole. Below the plastic cover, there is a small rectangular hole shaped exactly like the car key. Insert the key to pry open the cover and reveal the keyhole.
7
5
Share

What is the horsepower of the Geely Boyue Pro?

Boyue PRO will be equipped with a 1.5T engine with a maximum power of 177 horsepower and a peak torque of 255 Nm, as well as a 1.8T engine with a maximum power of 184 horsepower and a peak torque of 300 Nm, both meeting the China VI b emission standards. The extended information about Boyue PRO is as follows: Introduction to Boyue PRO: It will form the "Boyue Family" together with the 2020 Boyue, promoting the classic Boyue model towards a family-oriented development. It also marks the beginning of Geely's dual-vehicle strategy in the compact SUV segment, further consolidating Geely's leading position in the compact SUV market while competing comprehensively with more Chinese brands and mainstream joint-venture brands. Powertrain: The six models of Boyue PRO are equipped with two types of powertrains: three models with a 1.5T three-cylinder engine and three models with a 1.8T four-cylinder engine. The 1.5T engine delivers a maximum output power of 177 horsepower and a peak torque of 255 Nm, paired with an Aisin 6-speed automatic transmission or a 6-speed manual transmission. The 1.8T engine offers a maximum output power of 184 horsepower and a peak torque of 300 Nm.
17
2
Share

What is the wheelbase of the Passat?

The wheelbase of the Passat is 2803mm, with a body length, width, and height of 4870mm, 1834mm, and 1472mm respectively. It is a mid-size sedan designed by Volkswagen AG in Germany. The front suspension uses a MacPherson strut independent suspension, while the rear suspension employs a multi-link independent suspension. The Passat is equipped with three engines: a 1.4-liter turbocharged engine, a low-power version of the 2.0-liter turbocharged engine, and a high-power version of the 2.0-liter turbocharged engine. The 1.4-liter turbocharged engine has a maximum power of 110KW, a maximum torque of 250NM, and reaches its peak power at 5000 rpm. The low-power version of the 2.0-liter turbocharged engine delivers a maximum power of 137KW, a maximum torque of 320NM, and achieves peak power between 4100 to 6000 rpm. The high-power version of the 2.0-liter turbocharged engine produces a maximum power of 162KW, a maximum torque of 350NM, and reaches peak power between 4500 to 6200 rpm.
5
1
Share

Does the Audi A3 have defogging for the rearview mirrors?

The Audi A3 is equipped with heated rearview mirrors. The principle of heating the mirrors is similar to adjusting them; you simply rotate the heating knob to the heating symbol to start the process. When the rearview mirrors become unclear, activating this function can help make the mirror surface clearer. The heating knob for the rearview mirrors is located next to the gear lever. Below is some extended information about rearview mirrors: Correct method to adjust the Audi A3 rearview mirrors: Before adjusting the rearview mirrors, it is essential to adjust the vehicle's seat and steering wheel positions properly. The basic principle for seat adjustment is to ensure comfort, clear visibility, and ease of steering wheel use. Maintaining the correct sitting posture is a prerequisite for adjusting the rearview mirrors; improper posture will render the adjusted mirrors ineffective. How the rearview mirror heating works: The working principle of electrically heated rearview mirrors is very simple and not highly costly. It involves installing an electric heating element (heating film) inside the mirror lenses on both sides. During rainy or snowy weather, when the driver activates the rearview mirror heating function, the heating element quickly warms up to a fixed temperature within a few minutes, typically between 35-60 degrees Celsius. This heats the mirror surface, effectively defogging and defrosting it, providing significant convenience for the driver.
9
0
Share

How to Distinguish Between Stock Cars and New Cars

Methods to distinguish between stock cars and new cars include checking the vehicle production nameplate, examining the window production date, and inspecting the vehicle identification number (VIN). Below are the detailed explanations: 1. Check the vehicle production nameplate: Every car is affixed with a nameplate before leaving the factory. This nameplate not only contains information such as the vehicle model but also the manufacturing date of the vehicle. Therefore, by checking this area, you can directly and easily determine the production time of the vehicle, making it the simplest way to verify the manufacturing date. This ensures you don't end up purchasing a stock car that has been sitting for too long. 2. Examine the window production date: On the car's front windshield, there is usually a production date for the glass. Based on this date, you can estimate the timeframe in which the glass was produced and determine whether the glass has been replaced. After all, the production dates of the vehicle and the glass should not be too far apart. 3. Inspect the vehicle identification number (VIN): The VIN is a 17-digit code that can be used to determine the production date of the car. The 17 digits are divided into three parts. You can check the 10th digit, which represents the production date of the vehicle. By verifying the 10th digit, you can confirm the production time.
15
1
Share

What causes the rear air vents in the Boyue Pro to have no airflow?

The reasons for no airflow from the rear air vents in the Boyue Pro include blower malfunction, clogged cabin air filter, and control system failure. Below are detailed explanations for each of these causes: Blower malfunction: The blower is the core component determining whether the car's air conditioning system produces airflow. If it is damaged, the car's air conditioning will inevitably fail to blow air. Blower malfunctions are typically caused by overheated internal coils or capacitor damage. You can check for blower issues by turning the car's air conditioning speed and airflow to maximum and listening for the blower's sound. If a malfunction is detected, it is necessary to visit a 4S shop or repair facility for servicing. Clogged cabin air filter: A clogged cabin air filter is one of the most common causes of airflow blockage in the system. Outside air passes through the cabin air filter before entering the car's interior, trapping various airborne particles, which can lead to clogging. You can remove the cabin air filter to inspect its cleanliness and replace it if it is excessively dirty. Control system failure: If neither of the above causes applies, the issue may lie with the car's air conditioning control system. Possible culprits include the air blend door, control switches, or the air conditioning computer. In such cases, it is advisable to contact a professional for diagnosis and repair.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.