How often should the Honda Vezel's fuel filter be replaced?

2 Answers
OVera
07/29/25 12:33pm
Vezel's fuel filter should be replaced every 30,000 kilometers. 1. The fuel filter, fully known as the fuel filter, is a type of fuel purifier. 2. It filters impurities from the fuel, providing clean fuel to the engine, and is an important automotive component that protects the engine and fuel supply system. During the production, storage, transportation, and use of gasoline, certain impurities such as iron oxide and dust are inevitably produced, or the quality of fuel from some gas stations may inherently be poor, containing a large amount of impurities. If these impurities are not filtered out and are brought into the engine and fuel supply system, they could damage the cylinders or cause the fuel injectors to clog. This necessitates the use of a fuel filter to remove impurities and ensure the vehicle operates normally.
Was this review help?
10
0
Share
StEthan
08/14/25 12:07am
I've been driving a Honda Vezel for almost four years. The gasoline filter is recommended to be replaced every 30,000 kilometers or two years, which is consistent with the manufacturer's manual. I mostly drive in the city, where traffic jams are severe, so the filter gets dirty faster and needs more frequent inspection and replacement. It's not difficult to replace; a professional repair shop can get it done in half an hour, costing a little over 200 yuan. If not replaced, a clogged filter can cause a drop in fuel pressure, leading to slower acceleration and possibly severe shaking. Last time, I delayed the replacement until 35,000 kilometers, and during that period, my fuel consumption increased by 10%. Regular maintenance can save on fuel costs and prevent bigger issues, so it's best to develop a habit and not be lazy. Additionally, the quality of fuel in China varies, so filling up at a better gas station can also reduce the burden on the filter.
Was this review help?
8
5
Share
Expand All
More Forum Discussions

How to Distinguish Run-Flat Tires?

Distinguishing run-flat tires can be done by: 1. Checking the sidewall of the tire for special symbols following the specifications, which are absent in regular tires; 2. Placing the tire flat on the ground and standing on it—run-flat tires have hard sidewalls, while regular tires feel soft when pressed by hand. Run-flat tires are primarily designed to prevent loss of vehicle control in the event of sudden tire pressure loss. They consist of the outer tire, standard inner tube, spare inner tube, steel rim, gas generator, pressure sensor, and control unit. Characteristics of run-flat tires include: 1. They possess support and toughness, allowing the rim and tire to combine and support the vehicle safely during sudden air loss or a blowout; 2. After a blowout, run-flat tires do not immediately lose all air, enabling the driver to continue driving for a certain distance with reduced pressure; 3. The reinforced sidewalls of run-flat tires enhance durability and usability.
9
2
Share

What is the difference between Audi's on-demand four-wheel drive and full-time four-wheel drive?

Audi's on-demand four-wheel drive and full-time four-wheel drive differ in the following aspects: 1. Different concepts: Audi's on-demand four-wheel drive means the four-wheel drive system is activated when appropriate, otherwise, it operates as a two-wheel drive system; full-time four-wheel drive is always in a four-wheel drive state. 2. Different applicable conditions: Audi's on-demand four-wheel drive vehicles are convenient to operate and widely used in urban SUV models; full-time four-wheel drive is applied in off-road desert conditions. Audi's sedan models include the A6L, A4, A3, A7, and A8L. Taking the 2021 Audi A6L as an example, it is a mid-to-large-sized car with body dimensions of 5038mm in length, 1886mm in width, 1475mm in height, a wheelbase of 3024mm, a minimum ground clearance of 117mm, and a body weight of 1800kg.
11
4
Share

Where is the car oxygen sensor installed?

Location of the car oxygen sensor: one is located behind the exhaust manifold, and the other is behind the three-way catalytic converter. The oxygen sensor behind the exhaust manifold is called the front oxygen sensor, while the one behind the three-way catalytic converter is called the rear oxygen sensor. The oxygen sensor can detect the oxygen content in the exhaust and then feed the data back to the ECU, which can adjust the air-fuel ratio based on this data. The faster the voltage frequency of the oxygen sensor changes, the better the sensor is. If the voltage is 0 millivolts or 1 millivolt or even does not change, it indicates that the oxygen sensor is severely aged and needs to be replaced in time. Under normal circumstances, the signal of the front oxygen sensor is higher than that of the rear oxygen sensor.
7
3
Share

Where is the fuse box located in a BMW?

BMW's fuse box is located under the steering wheel in the main driver's compartment. The working principle of a fuse is: when the circuit current exceeds twice the rated current of the fuse, it will blow within seconds to protect the circuit. BMW's models include: BMW X1, BMW 3 Series, BMW X5, BMW X6, BMW X7, etc. Taking the 2021 BMW X1 as an example, its body dimensions are: length 4565mm, width 1821mm, height 1620mm, with a wheelbase of 2780mm. The 2021 BMW X1 features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 140PS, a maximum torque of 220Nm, and a maximum power of 103kW, paired with a 7-speed dual-clutch transmission.
20
5
Share

How to Use Reference Points and Steer the Wheel for C1 License Subject 2 Reverse Parking?

C1 exam reverse parking reference points and steering method: When the lower edge of the left rearview mirror aligns with the starting line, quickly turn the steering wheel fully to the right; When the distance between the vehicle body and the library corner line is greater than or equal to 30cm, keep the steering wheel unchanged and continue reversing; If the distance is less than 30cm, turn the steering wheel one circle to the left until reaching the appropriate distance, then continue reversing; When the vehicle body is parallel to the library sideline, straighten the steering wheel, and stop when the lower edge of the left rearview mirror aligns with the library corner line. Permitted vehicle types for C1 license: The C1 driving license allows driving small and mini passenger vehicles, light and mini cargo vehicles; light, small, and mini special purpose vehicles; small passenger vehicles with seating capacity ≤9. C1 license prohibits driving: large buses, tractor trucks, city buses, medium buses, large trucks, ordinary tricycles, ordinary motorcycles, mopeds, wheeled self-propelled machinery, trolleybuses, and trams. Additionally, C1 license holders cannot drive vehicles with over 9 seats or trucks exceeding 6 meters in total length.
20
2
Share

Which province does the Wu A license plate belong to?

In China, there is no vehicle license plate that starts with the character 'Wu'. Such license plates only appear in TV dramas or movies to match fictional place names. These plates are not allowed on the road and are considered illegal. Even for filming purposes, prior notification to the traffic management department is required. Below is an introduction to vehicle license plates of various provinces in China: Beijing (Jing), Tianjin (Jin), Heilongjiang (Hei), Jilin (Ji), Liaoning (Liao), Hebei (Ji), Henan (Yu), Shandong (Lu), Shanxi (Jin), Shaanxi (Shaan), Inner Mongolia (Meng), Ningxia (Ning), Gansu (Gan), Xinjiang (Xin), Qinghai (Qing), Tibet (Zang). Hubei (E), Anhui (Wan), Jiangsu (Su), Shanghai (Hu), Zhejiang (Zhe), Fujian (Min), Hunan (Xiang), Jiangxi (Gan), Sichuan (Chuan), Chongqing (Yu), Guizhou (Gui), Yunnan (Yun), Guangdong (Yue), Guangxi (Gui), Hainan (Qiong), Hong Kong (Gang), Macau (Ao), Taiwan (Tai).
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.