How Often Should the Gasoline Filter of the Vezel Be Replaced?

3 Answers
PaigeMarie
07/29/25 3:45pm
The gasoline filter of the Vezel should be replaced every 30,000 kilometers. The gasoline filter, also known as the fuel filter, is a type of fuel filter that removes impurities from the fuel, providing clean fuel to the engine. It is an important automotive component that protects the engine and fuel supply system. The Vezel is the first SUV under GAC Honda, with dimensions of 4294mm in length, 1772mm in width, and 1605mm in height, and a wheelbase of 2610mm. In terms of exterior design, the car features a winged front grille design, with a mysterious and elegant black as the base tone. The grille and headlights are integrated to highlight a bold and dynamic personality. The LED headlights, designed with dual lamp positions, are combined with arc-shaped LED daytime running lights, perfectly unifying elegance and sharpness.
Was this review help?
13
3
Share
NevaehRose
08/15/25 3:21am
When it comes to replacing the fuel filter of the Vezel, my experience as a seasoned driver is that Honda's official manual recommends changing it every 30,000 kilometers or every 2 years. The filter plays a crucial role in filtering fuel impurities to prevent injector clogging, engine shaking, or increased fuel consumption. In congested urban driving conditions where impurities accumulate faster, shortening the interval to every 20,000 kilometers is better. If you drive mostly on highways, you can extend the interval appropriately. Don’t forget to check the fuel pump’s operating sound and acceleration performance—address any abnormalities promptly. Regular replacement not only protects the engine’s lifespan but also saves money and hassle. I always prioritize checking this component during every maintenance session. Additionally, fueling up at reputable gas stations can slow down the filter’s aging and avoid the trouble of breaking down midway.
Was this review help?
6
0
Share
Expand All
MacHazel
10/12/25 3:41am
I've been driving my Vezel for several years and change the fuel filter every three years. Last time, I delayed until 50,000 kilometers, and the car's acceleration noticeably slowed down. The mechanic found the filter was completely clogged, causing insufficient fuel supply. The replacement was super simple—just 200 yuan at the 4S shop, and it took only an hour with all the tools ready. Now the car runs smoothly, and fuel consumption is stable. If you often drive on dusty roads or use cheap fuel, I recommend shortening the interval and checking more frequently. When changing the filter, it's good to maintain other parts of the fuel system for overall better maintenance—don't skimp and risk damaging the car.
Was this review help?
19
3
Share
Expand All
More Forum Discussions

What is the method to reset the maintenance light on the JAC Refine S3?

The method to reset the maintenance light on the JAC Refine S3 is: turn off the ignition switch, press and hold the adjustment lever at the lower right of the instrument panel, and then turn on the ignition switch to reset. The functions of the maintenance light are: 1. Record the mileage of important components; 2. Remind the owner to perform maintenance. The JAC Refine S3 is a compact SUV with body dimensions of: length 4345mm, width 1765mm, height 1640mm, wheelbase 2560mm, and a fuel tank capacity of 45L. It is equipped with a 1.5L naturally aspirated engine, with a maximum power of 85kW and a maximum power speed of 6000rpm.
19
1
Share

What colors are available for the Geometry A car?

Geometry A car comes in the following colors: 0° White, 11° Silver, 18° Gold, 26° Blue, and 100° Red. The Geometry A is a pure electric compact car with the following body dimensions: length 4736mm, width 1804mm, height 1503mm, wheelbase 2700mm, and a trunk capacity of 430L. It uses 205/60R16 tires. The car is equipped with a front-mounted ternary lithium battery, with a total motor power of 120kW and a total motor torque of 250Nm. It is paired with a fixed gear ratio transmission and features a MacPherson independent front suspension and a torsion beam non-independent rear suspension.
6
3
Share

How to Set One-Touch Up/Down for the Avalon?

The method to set one-touch up/down for the Avalon is: 1. Start the vehicle, press down or lift the button to the first position, and release when reaching the desired position; 2. Press or lift the button firmly to the second position for automatic rising or descending. The Avalon is a mid-size sedan with body dimensions of length 4975mm, width 1850mm, height 1450mm, a wheelbase of 2870mm, and a fuel tank capacity of 60 liters. It is equipped with a 2.5L naturally aspirated engine, delivering a maximum power of 154kW at 6600rpm and a maximum torque of 250Nm.
2
5
Share

How to Replace Brake Pads with an Electronic Parking Brake?

Electronic parking brake replacement of brake pads method is: 1. Use a jack to lift the front part of the car; 2. Use tools to remove the tire; 3. Unscrew the caliper screws, remove the damaged brake pads and replace them. The electronic parking brake is a technology that achieves parking braking through electronic control. The working principle of the electronic parking brake is: 1. Parking is achieved through the friction clamping between the brake shoe and the brake hub or between the friction plate and the brake disc; 2. The control method replaces the original manual operation and mechanical linkage with electronic buttons and motors. The full name of this system is the electronically controlled mechanical parking brake system.
19
3
Share

Do Automatic Headlights Need to Be Turned Off After the Engine Is Off?

Automatic headlights do not need to be turned off after the engine is off. The method to activate automatic headlights is: adjust the combination switch of the car lights to the auto position. The function of automatic headlights is: when the light becomes dim during driving, the headlights will automatically turn on, and when the light becomes bright, they will automatically turn off. The working principle of automatic headlights is: the photosensitive sensor forms a voltage signal based on changes in external light, which is fed back to the automatic headlight control module. After data analysis, it determines whether the lights should be turned on. The maintenance methods for automatic headlights are: 1. Regularly check the lamp cover to avoid water droplets; 2. Prevent impact from foreign objects.
9
5
Share

How to Adjust the Rearview Mirror of the Tiguan?

The method to adjust the rearview mirror of the Tiguan is: Press the circular button next to the door corresponding to the rearview mirror, then adjust the mirror up, down, left, or right as needed. The functions of the rearview mirror are: 1. To prevent traffic safety accidents and ensure personal safety; 2. To expand the driver's field of vision. The Tiguan is a compact SUV with the following dimensions: length 4506mm, width 1809mm, height 1685mm, wheelbase 2684mm, and a fuel tank capacity of 63 liters. It is equipped with a 1.8T turbocharged engine, with a maximum power of 118kW and a maximum power speed range of 4500 to 6200 rpm.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.