How often should the engine oil be changed for UY125?

What does the turtle sunbathing on the car mean?

Turtle sunbathing symbol lights up when there is a problem with the battery. Here are the specific details: 1. Power system: The sun in the turtle sunbathing represents a gear. If this light comes on, it means there is a problem with one of the gears in the car. At this time, the owner should promptly go to a repair shop for maintenance, otherwise it could easily lead to a traffic accident. 2. Maintain low speed: When the turtle light comes on, it indicates that the vehicle's power system is not working properly, but it can still maintain low-speed driving. The driver can use this time to drive to a repair shop or a safe parking spot.

3

2

Share

Are Dunlop Tires Made in China?

Dunlop tires originated in the UK. Here is an introduction to Dunlop tires: 1. Development History: In 1985, Dunlop Tires was acquired by Japan's Sumitomo and has production bases in Japan and China. In 2002, Dunlop began building a factory in Changshu, Jiangsu, China. On August 13, 2010, Dunlop signed an agreement to invest $300 million in building a second factory in Changsha, Hunan. On August 21, 2010, the Dunlop Bridge at Shanghai Tianma Mountain Circuit was completed. The Chinese-made Dunlop tires have appropriately lowered the positioning of some small-sized tires to meet the needs of almost all vehicle models. 2. Performance: Dunlop tires have always adhered to the concept that 'tires can contribute to the Earth's environment,' focusing on three core concepts: 'low fuel consumption,' 'raw material development,' and 'resource conservation.' Through high-precision analysis of rubber molecules and realistic simulation of raw materials, Dunlop has achieved comprehensive improvements in the three major performance aspects of tires: low fuel consumption, grip, and wear resistance.

13

1

Share

Do You Need to Observe Traffic Lights When Making a U-Turn at an Intersection?

If the gap is marked with a dashed line, the U-turn is not affected by traffic signals and does not require crossing the pedestrian crossing. You can make a U-turn directly, provided it does not interfere with other normally moving vehicles and ensures your own safety. If the gap is marked with a solid line, then the U-turn must cross the pedestrian crossing and is subject to traffic signals. If you need to cross the pedestrian crossing to make a U-turn, you must yield to pedestrians: When pedestrians are walking on the right side of the crosswalk and have not reached the centerline of the road, vehicles traveling on the left side of the road should slow down and proceed cautiously, ensuring safety while allowing pedestrians to cross. When pedestrians are waiting outside the boundary line between motorized and non-motorized lanes and have not entered the roadway, vehicles should slow down and proceed cautiously, ensuring safety while allowing pedestrians to cross. If pedestrians have crossed the boundary line between motorized and non-motorized lanes, and vehicles do not stop to let them pass, it constitutes a violation and should be penalized. When pedestrians have entered the motorized lane (Lane A) via the crosswalk, vehicles in Lane B should slow down and proceed cautiously, ensuring safety while allowing pedestrians to cross. If vehicles in Lane A do not stop to let pedestrians pass, it constitutes a violation and should be penalized. If pedestrians are waiting at the centerline of the road without entering the motorized lane, and vehicles do not stop to let them pass, it constitutes a violation and should be penalized. If pedestrians have crossed the centerline of the road and entered the motorized lane, and vehicles do not stop to let them pass, it constitutes a violation and should be penalized. When the road is divided by a median with greenery, and pedestrians are waiting in the median area, vehicles must slow down and proceed cautiously, ensuring safety while allowing pedestrians to cross. Scenarios where U-turns are allowed: If there is a U-turn sign at the intersection, you can make a U-turn. If there is a U-turn traffic signal, you must follow the signal's instructions. If there is no signal, you can make a U-turn based on the specific situation, provided it does not interfere with other vehicles or pedestrians. If there is no explicit prohibition of U-turns or left turns at the intersection, you can make a U-turn. "No explicit prohibition" means there are no "No U-Turn" or "No Left Turn" signs, and the centerline is not solid. In such cases, you can confidently make a U-turn. U-turns are also allowed on yellow grid lines. Yellow grid lines are no-stopping zones typically marked at intersections prone to congestion due to temporary parking, important facility entrances, or other critical locations. Stopping on these lines (including waiting for traffic signals) is a violation. Although vehicles cannot stop in yellow grid zones, they are allowed to make U-turns there. As long as there is no central barrier, yellow grid lines are equivalent to "U-turns permitted." If there is a U-turn traffic signal at the intersection, you must follow it—only proceed on green. If "No Left Turn" and "U-Turn Permitted" signs appear together, U-turns are allowed but left turns are prohibited. However, "No U-Turn" does not necessarily mean "No Left Turn." Things to note when making a U-turn at an intersection: Observe road markings. If the line is solid, U-turns are prohibited under any circumstances. Continue driving to find a suitable U-turn location. If there is a "No Left Turn" sign ahead, even if there is no explicit "No U-Turn" sign, U-turns are not allowed at that intersection because U-turns and left turns are closely related—a U-turn typically requires a left turn first. U-turns must be made from the innermost left-turn lane. If you are in the second left-turn lane, you cannot make a U-turn at that intersection. Always yield to oncoming traffic when making a U-turn. Proceed only if it does not interfere with their normal movement; otherwise, you will bear full responsibility for any accidents. Near the intersection stop line, lanes usually have guiding arrows indicating permitted movements. The leftmost lane is not always for left turns only. If it has a straight arrow, even without explicit "No U-Turn" signs, U-turns are not allowed.

20

0

Share

Should I Purchase Vehicle Damage Insurance?

It is necessary. Currently, almost more than half of accidents are compensated through vehicle damage insurance. Vehicle damage insurance refers to a type of commercial auto insurance where the insurer compensates within reasonable limits for damages to the insured vehicle caused by an insured accident while the vehicle is being used by the insured or an authorized driver. Additional Information: The insurer is responsible for compensating for losses to the insured vehicle caused by the following reasons: 1. Collision, overturning, falling; 2. Fire, explosion, spontaneous combustion (requires separate spontaneous combustion insurance); 3. Falling or collapse of external objects; 4. Storm, tornado; 5. Lightning strike, hail, heavy rain, flood, tsunami; 6. Ground collapse, ice collapse, cliff collapse, avalanche, mudslide, landslide, earthquake.

7

5

Share

What Causes a Diesel Pickup Truck to Fail to Accelerate When Pressing the Throttle?

Diesel pickup trucks failing to accelerate when pressing the throttle can be attributed to ignition system malfunctions, fuel system failures, or excessive engine carbon buildup. Below are detailed explanations: 1. Ignition system malfunction: Faulty ignition systems and poor combustion result in weak engine acceleration. Examples include aging ignition coils and spark plugs that have not been replaced for an extended period. 2. Fuel system failure: Issues in the fuel system leading to low pressure and insufficient fuel injection can cause weak engine acceleration. 3. Excessive engine carbon buildup: Too much carbon buildup in the engine and poor fuel atomization can also lead to weak acceleration, poor combustion, and excessive exhaust emissions.

3

5

Share

Are There Steel Wires Inside Tires?

Modern car tires do not have steel wires in their sidewalls. More details are as follows: 1. Materials: Current manufacturing processes use nylon or polyester cords woven into a mesh. Nylon cords make the tire lighter and more elastic. 2. Steel belt layer: Modern tires do have a steel belt layer, but it is located beneath the tread and embedded in rubber, not in the sidewall. A steel wire bead is present at the rim joint area to maintain the inner shape and form a seal with the rim. The so-called radial-ply structure refers to the tire body's fiber arrangement radiating from the center point at a 90-degree angle to the wheel's longitudinal axis, forming a single-layer structure.

11

1

Share

How often should the engine oil be changed for UY125?

What does the turtle sunbathing on the car mean?

Are Dunlop Tires Made in China?

Do You Need to Observe Traffic Lights When Making a U-Turn at an Intersection?

Should I Purchase Vehicle Damage Insurance?

What Causes a Diesel Pickup Truck to Fail to Accelerate When Pressing the Throttle?

Are There Steel Wires Inside Tires?

Which is better, tire grade H or T?

Where is the trunk opening button of the Tayron located?

What Causes the Buzzing Sound After Starting the Car?

What is the difference between the red and green lights on the Audi A6L AC button?