How often should the engine belt of Mazda CX4 be replaced?

1 Answers
OMorgan
07/29/25 5:56pm
Mazda CX4's generator belt generally needs to be replaced every 2 years or approximately 60,000 kilometers. The generator belt is the most important belt in a car, connecting components such as the generator, air conditioning compressor, power steering pump, tensioner pulley, and crankshaft pulley. The replacement intervals for belts in vehicles are specified by the manufacturer and are detailed in the vehicle's maintenance manual. The following situations indicate the need for generator belt replacement: 1. When inspecting the belt, if we find defects such as core breakage or groove section cracking, we must replace it immediately. 2. When the belt's cover layer separates from the cord or the cord frays, the belt should be replaced. 3. When the belt is placed on the pulley, there should be a gap between the inner diameter of the belt and the bottom of the pulley groove. If there is no gap, the belt must also be replaced.
Was this review help?
13
5
Share
More Forum Discussions

Does a minor body kit require registration?

Minor body kits do not require registration as they fall within legal modification limits, whereas major modifications do need to be registered. Below is relevant information about vehicle modifications: 1. Overview: Modifications involve altering factory-installed components or exterior appearance. Proper modifications can enhance driving safety and performance. Vehicle customization reflects personal style while addressing performance and safety needs. 2. Regulations: Laws restrict modifications - vehicle model, engine type, and VIN cannot be altered, and structural integrity must be maintained. Color changes or engine/body/frame replacements require inspection and safety certification. Decals covering over 30% of the body surface require official approval.
6
1
Share

What to Do If the Ford Focus Differential Is Leaking Oil?

The solution for a leaking differential in a Ford Focus is to replace the differential oil seal. The function of the differential is to meet the requirement for different wheel speeds when the car is turning. The car differential enables the left and right (or front and rear) drive wheels to rotate at different speeds. It mainly consists of left and right half-shaft gears, two planetary gears, and a gear carrier. The steps to replace the car differential oil are as follows: 1. First, lift the car and place a large container underneath to catch the waste oil. Use an appropriate screwdriver to remove the inner and outer casings of the transmission. Some transmission oil will flow out at this point, so be careful to avoid it. 2. When most of the oil has drained, remove the last oil pan, being careful to support it by hand as it still contains a significant amount of waste oil. 3. Remove the oil pan gasket and clean the surrounding area. If the gaps are not clean enough, use tools and cotton cloth to thoroughly clean all the filtered transmission oil components, then reinstall them one by one. 4. Wipe the surfaces of the replaced parts clean, ensuring there are no water or oil stains, as these can cause leaks. Install the cleaned oil pan and gasket together and add the manufacturer-recommended oil. Check the oil level through the fill hole to ensure it is full. If the oil is full, it will start to flow out of the observation hole.
11
0
Share

What should you buy to keep in a new car?

For a new car, you should purchase items like an umbrella, bamboo charcoal bags, a flashlight, and a car cover to keep inside. Below are some important considerations regarding items placed in the car: 1. Flammable items in the car: Car perfumes, lighters, and similar items are flammable, especially during hot summer months. Avoid placing these items in the car as high external and internal temperatures can easily lead to explosions or fires. 2. Unsuitable decorations: Avoid placing decorations with sharp edges inside the car. If the edges of these decorations face the occupants, it can easily lead to accidents. Particularly, if sharp edges face the driver, it may result in serious injuries.
3
4
Share

Do You Need to Press the Brake When Shifting Gears While Driving an Automatic Transmission?

For an automatic transmission car, you only need to press the brake when shifting to the P (Park) gear. For other gears, normal manual control is sufficient, and no assistance from the right foot is required. The reason for pressing the brake in P gear is that there is a control lock valve in the P position, which must be released by pressing the brake before the gear can be shifted from P to other positions. Additional Information: Shifting techniques for different gears in an automatic transmission are as follows: 1. P Gear (Park). This is the parking gear, which uses a mechanical device inside the transmission to lock the rotating parts of the car. It should only be used when the vehicle is completely stopped. 2. N Gear (Neutral). This is the neutral gear. For short stops, you can shift to neutral, allowing the right foot to rest off the brake pedal. However, on slopes, you should still press the brake to prevent rolling unless the handbrake or electronic brake is engaged. 3. D Gear (Drive). This is the forward driving gear. When in D gear, the driver only needs to control the accelerator pedal to adjust the speed, and the transmission will automatically determine the appropriate gear based on the throttle input and vehicle speed. 4. R Gear (Reverse). This is the reverse gear. It is important to ensure the vehicle is completely stopped before shifting to R gear to avoid transmission wear. 5. S Gear (Sport). This is the sport mode. In this mode, the engine maintains higher RPMs for greater power, suitable for pursuing speed, but it also increases fuel consumption.
17
3
Share

Does New Energy Vehicle Insurance Cover the Battery?

Since the insurance for new energy vehicles basically follows the traditional car insurance model, there is currently no separate insurance specifically for the battery. Here is some relevant information about new energy: 1. Definition: New energy, also known as non-conventional energy, refers to various forms of energy other than traditional energy sources. It includes energy sources that are just beginning to be developed or are under active research and awaiting promotion, such as solar energy, geothermal energy, wind energy, ocean energy, biomass energy, and nuclear fusion energy. 2. Characteristics: These energy sources are abundant and generally renewable, providing sustainable use for humanity. However, they have low energy density and require large spaces for development and utilization.
2
4
Share

How many interior color options are available for the Haval F7?

The Haval F7 offers a total of two interior color options, which are relatively limited in terms of personalization. The available colors are black and brown-black. The interior color choices are not as youthful and vibrant as the exterior. It is suggested that more options like red or beige could be added to enhance the overall design aesthetic. The dashboard is tilted towards the driver's side for easier operation. Personally, I think black is a better choice as it is more resistant to dirt. The Haval F7 is the second model in Haval's F series, launched on the evening of November 6, 2018, at the Shanghai Carbon Studio in the form of a masked singer program. The Haval F7 is the flagship model of the Haval F series, an AI intelligent connected SUV. The new car comes in two versions, 1.5GDIT and 2.0GDIT, with a total of six models, priced between 109,000 yuan and 149,000 yuan.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.