How often should the Emgrand be serviced?

1 Answers
VanValeria
07/30/25 4:39am
Emgrand requires maintenance every 5,000 kilometers or 6 months. The engine oil and filter should be replaced every 7,500 kilometers or half a year. The automatic transmission fluid and spark plugs need replacement every 30,000 kilometers, while the brake fluid should be changed every 3 years. The air filter and cabin air filter replacement intervals are between 15,000 to 20,000 kilometers. Emgrand is a sub-brand under Geely's parent brand. Taking the Emgrand GS 2020 1.4T manual Ya Life as an example: it's a compact SUV with dimensions of 4440mm in length, 1833mm in width, and 1573mm in height, featuring a wheelbase of 2700mm. It is powered by a 1.4L turbocharged engine paired with a 6-speed manual transmission.
Was this review help?
11
0
Share
More Forum Discussions

What is the reason for the idle speed not dropping below 2000 RPM?

The reasons for the idle speed not dropping below 2000 RPM are as follows: Idle switch not closing: The rotation speed signal determines the fuel injection volume and injection timing, but the engine is operating under idle conditions with reduced air intake, leading to an overly rich air-fuel mixture and an increase in RPM. Faulty idle control valve: When the idle speed exceeds the set RPM, the ECU commands the idle control valve to reduce the air intake by closing the bypass channel, thereby lowering the engine speed. Issues such as sticking due to oil contamination, carbon buildup, or incomplete throttle closure can prevent the ECU from properly adjusting the idle speed, resulting in unstable idling.
10
0
Share

Do the Tail Lights Illuminate When the Handbrake is Engaged?

Engaging the handbrake does not cause the tail lights to illuminate. Reasons why the handbrake does not trigger the brake lights: The handbrake mechanism lacks power wiring, making it incapable of controlling the brake lights. Moreover, it doesn't even have a brake light switch. The handbrake operates via a steel cable connected to the rear brake shoes to apply braking force to the vehicle. Function of brake lights: Brake lights are typically installed at the rear of the vehicle, featuring red-colored lenses with penetrating light sources. This design ensures that following vehicles can detect when the leading vehicle is braking under low visibility conditions, thereby helping to prevent rear-end collisions. Their working principle involves electrical current passing through a fuse to the brake switch. When the brake pedal is depressed, the switch closes, sending power to two brake lights and one high-mounted brake light, completing the circuit through the negative wire connected to the vehicle body.
6
0
Share

Is it normal for the temperature gauge to exceed halfway?

The temperature gauge exceeding halfway is abnormal and indicates an overheating condition. Below are the steps to handle an overheating car temperature gauge: Find a place to park: First, find a safe and shady place to park, let the vehicle idle without turning off the engine. Open the radiator cap: Then open the hood, wait for the temperature to drop before loosening the radiator cap one notch, and wait for the internal steam pressure to fully release before opening it completely. Check components: Inspect the liquid in the radiator and the fan for any abnormalities, and check the radiator hoses for leaks and whether the coolant is sufficient. If there is no coolant in the car, you can temporarily use mineral water as a substitute. If the issue is caused by a faulty water pump, thermostat, etc., seek assistance as soon as possible.
8
0
Share

Will not deregistering a motorcycle affect the transfer of a car?

Not deregistering a motorcycle will affect the transfer of a car. Motorcycle license plate misuse: If the motorcycle license plate is misused by others, resulting in traffic violation records, and the violations are not handled, the driver will not pass the license renewal inspection. The deregistration of the scrapped motorcycle must be completed before the inspection can proceed. Driving an unregistered vehicle: If an unregistered scrapped vehicle is driven on the road and caught by traffic police, not only will a fine be imposed, but the driver's license will also be revoked. If this motorcycle is involved in a traffic accident, the original owner will still be held responsible. Therefore, even if the vehicle has not been inspected for 30 years, the vehicle management office will still have account information, and for serious violations, the owner may be blacklisted.
3
1
Share

Are 14x3.2 and 3.0x10 Tubeless Tires Interchangeable?

Tubeless tires 14x3.2 and 3.0x10 are interchangeable, just expressed differently. Tire pressure for tubeless tires: According to the international GBT2978-2008 standard requirements: Standard tires: 2.4-2.5bar; Reinforced tires: 2.8-2.9bar; Maximum pressure: Should not exceed 3.5bar. Identifying tubeless tire specifications: Tire specifications can be found in the sidewall text. Currently, almost all passenger car tires are radial tires. Following the radial passenger tire specification labeling method, they are marked in order of tread width, aspect ratio, compatible rim diameter, load index, and speed rating. The XL suffix on tires indicates reinforced load capacity.
11
2
Share

Does Using the Heater While Idling Consume Fuel?

Using the heater while idling does not consume fuel. The difference between heating and cooling: Theoretically, using the heater does not consume fuel because the car's heating and cooling systems operate differently. When cooling, the air conditioning compressor system engages, increasing the engine's load. Continuous use of the compressor will inevitably raise the engine's fuel consumption. In contrast, the heater utilizes the heat from the engine's coolant to warm up the air, which is then circulated to a small radiator. When the blower operates, it directs this warm air into the cabin, placing a relatively small load on the engine. How to use the heater: When using the heater, make sure not to press the AC button, as this will activate the cooling system. Since automatic air conditioning systems adjust accordingly, doing so can slow down the warming process and increase fuel consumption.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.