How often should the clutch fluid be changed in an automatic transmission?

What to Do When the Car Won't Start Due to ESC System Failure?

The solution for a car not starting due to ESC system failure is: Take the vehicle to a 4S shop or professional repair shop as soon as possible for inspection and troubleshooting of the throttle body and sensors. The reasons for ESC system failure are: 1. ABS pump malfunction; 2. Throttle body contamination; 3. Faulty or dirty speed sensor causing incorrect signal output that triggers the warning light. The working principle of the ESC system is: It judges the driving state based on sensor signals and performs precise control through calculations. When rotation, understeer, or oversteer occurs, it individually controls each wheel to improve vehicle stability.

16

1

Share

Is Polishing Useful for Car Scratches?

Polishing is useful for car scratches, and its functions are: 1. To make the paint surface smooth and shiny; 2. To effectively remove dirt and corrosion; 3. To restore the cleanliness of the paint surface. Polishing refers to the processing method that uses mechanical, chemical, or electrochemical action to reduce the surface roughness of the workpiece to obtain a bright and flat surface. The steps of polishing are: 1. Use a cleaning agent to wash the entire car; 2. Use water sandpaper to sand the scratched area; 3. Use a mechanical grinder with coarse polishing paste to roughly grind the marks left by the water sandpaper; 4. After rough grinding, add polishing paste for fine polishing; 5. Use a mechanical polisher with a mirror finish agent to remove the swirl marks left by the coarse polishing paste; 6. After polishing, wipe off the polishing paste, use cotton yarn dipped in polishing wax to polish the area, and then use dry cotton yarn to wipe off the excess polishing wax.

10

1

Share

How to Reset the Maintenance Light on Chery Tiggo 3?

To reset the maintenance light on the Chery Tiggo 3, follow these steps: 1. Turn off the ignition switch, ensuring the instrument panel is powered off; 2. Turn the ignition switch to the ACC position; 3. Press and hold the button on the instrument panel without releasing it, then turn the ignition switch to the ON position; 4. Wait for a few seconds, and the maintenance light will be cleared. The dimensions of the Chery Tiggo 3 are: length 4420 mm, width 1760 mm, height 1670 mm, with a wheelbase of 2510 mm and a fuel tank capacity of 55 liters. The Chery Tiggo 3 is equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 85 kW and a maximum torque of 143 Nm, paired with a 5-speed manual transmission.

7

3

Share

What does a dual-clutch car mean?

Dual-clutch car refers to a dual-clutch transmission, which is composed of two sets of manual transmissions. The clutch is located between the engine and the transmission, acting as a switch for power transmission between them. It is a transmission structure that can both transmit and cut off power. Precautions for clutch usage are: 1. The clutch must be thoroughly cleaned before installation to remove anti-rust grease and debris; 2. The clutch can be installed coaxially or on separate shafts, but axial fixation is mandatory; 3. For wet electromagnetic clutches, lubricating oil must be added between the friction plates during operation; 4. Power supply and control circuits, the clutch power supply is DC 24 volts; 5. When installing a jaw-type electromagnetic clutch, a certain gap must be ensured between the end face teeth to prevent grinding during idling.

4

1

Share

How long before the expiration of a driver's license can one apply for renewal?

Article 57 of the "Traffic Regulations and Penalty Points Rules": A motor vehicle driver shall apply for license renewal at the vehicle management office of the license issuing location or elsewhere within 90 days before the expiration of the motor vehicle driver's license. If the driver's license expires, traffic police will impose a fine upon discovery, but no penalty points will be deducted. There is a latest deadline for license renewal. If the license has been expired for less than one year, it can be renewed through the normal process; if expired for one to three years, the license will be revoked, and one can regain it by passing the subject one exam; if expired for more than three years, the license will be revoked. Article 57 of the "Traffic Regulations and Penalty Points Rules": A motor vehicle driver shall apply for license renewal at the vehicle management office of the license issuing location or elsewhere within 90 days before the expiration of the motor vehicle driver's license. When applying, one shall fill out an application form and submit the following documents and certificates: the identity proof of the motor vehicle driver, the motor vehicle driver's license, and a medical certificate of physical condition issued by a medical institution at or above the county level or the regimental level of the military. For those applying for a special small automatic transmission passenger vehicle for the disabled, a medical certificate of physical condition issued by a specialized medical institution designated by the provincial health authority shall be submitted. Materials required for driver's license renewal: original ID card and its copy, qualified physical examination form from a hospital designated by the vehicle management office, three one-inch white background color photos, a completed driver's license renewal application form, and the processing fee. Photos and physical examination certificates required for renewal can be brought by oneself. If concerned about the self-brought materials not meeting the requirements, one can directly handle the renewal at the license processing hall of the traffic police department to avoid delays. Relevant matters for driver's license renewal upon expiration: About renewal: For annual review and renewal of an expired driver's license, the old driver's license needs to be surrendered to the vehicle management office. Before renewal, all relevant traffic violation information on the license must be cleared; otherwise, the application will not be accepted. Renewal of a motor vehicle driver's license can be done through the mobile app "Traffic Management 12123," or through the vehicle management office, traffic management departments, or public security authorities, effectively renewing the motor vehicle driver's license.

3

5

Share

How to Clean a Car Fuel Injector?

Car fuel injector cleaning steps are: 1. Hang the cleaning device on the front hood of the car; 2. Locate the engine's fuel supply and return lines; 3. Disconnect the return line from the engine, select an appropriate adapter to plug the return line; 4. Connect the fuel supply line to the outlet of the cleaning device; 5. Open the fuel tank cap and remove the fuel pump fuse to stop the fuel pump operation. The fuel injector is a simple solenoid valve. When the solenoid coil is energized, it creates suction, lifting the needle valve to open the injector nozzle. Fuel is sprayed at high speed through the annular gap between the needle valve tip and the nozzle, forming a mist for optimal combustion.

6

5

Share

How often should the clutch fluid be changed in an automatic transmission?

What to Do When the Car Won't Start Due to ESC System Failure?

Is Polishing Useful for Car Scratches?

How to Reset the Maintenance Light on Chery Tiggo 3?

What does a dual-clutch car mean?

How long before the expiration of a driver's license can one apply for renewal?

How to Clean a Car Fuel Injector?

What is the tire size for the Audi A4?

What kind of engine does the Bora use?

Where to Conduct the Annual Inspection for a 2-Year-Old New Car?

Should You Replace All Four Tires at Once or Just Two?