How often should the car's oil filter be replaced?

2 Answers
MacJudah
07/28/25 11:28pm
The car's oil filter should be replaced every 5,000 kilometers or every six months, whichever comes first. The oil filter must be replaced when changing the engine oil. Different vehicle models may have varying replacement intervals, so owners should refer to the user manual for specific guidance. The steps for replacing the oil filter are as follows: 1. Warm up the engine; 2. Use a machine to extract the old oil; 3. Remove the old oil filter and replace it with a new one; 4. Add new engine oil. The oil filter, also known as the oil cleaner, functions to filter out debris, gum, and moisture from the engine oil, delivering clean oil to all lubrication points.
Was this review help?
19
5
Share
ValerieAnn
08/12/25 3:50am
I drive long distances frequently and always replace the oil filter whenever I change the engine oil. It's generally recommended to replace it every 5,000 to 10,000 kilometers. The filter is responsible for trapping dust and metal particles in the oil, protecting the engine from wear. I always get maintenance done at the 4S shop, where they check the manual for specific intervals. Driving habits play a big role—for example, frequent highway driving or off-road conditions may require more frequent changes. If the filter gets clogged, the oil becomes dirty, leading to increased engine noise and higher fuel consumption. Regular replacement not only saves money but also extends the vehicle's lifespan. Never delay it just to save trouble.
Was this review help?
18
3
Share
Expand All
More Forum Discussions

How to Remove the Headlights of Baojun 730?

The headlights of Baojun 730 are fixed to the radiator frame with screws. Remove the screws on the radiator frame to take out the headlights. Below are the precautions for replacing the headlights of Baojun 730: 1. The car headlights are fixed to the radiator frame with screws, and the headlights have headlight brackets. When installing the headlights, be careful with the tightening force of the screws to avoid damaging the headlight brackets. 2. To remove the headlights, the front bumper needs to be removed. During the removal process, avoid damaging the paint of the front bumper. Removing the front bumper makes it easier to take out the headlights. 3. After replacement, adjust the illumination direction and check the lighting position and brightness. 4. When replacing the lights, do not damage the original wiring of the car or install additional electrical devices. Damaging the original wiring or arbitrarily installing electrical devices can affect the car's risk of spontaneous combustion and pose safety hazards for future use.
7
5
Share

Why Is the Transmission Making Abnormal Noises?

Abnormal noises from the transmission may be caused by bearing wear or poor gear meshing inside the transmission. Bearing wear, looseness, or constant meshing gear noise: If abnormal noises are heard from the transmission when in neutral, and the noise disappears when the clutch is depressed, it is usually due to wear or looseness of the front and rear bearings of the transmission's first shaft or noise from the constant meshing gears. If the noise occurs in all other gears, it is mostly due to the rear bearing of the second shaft. For severely loose or damaged bearings, they should be promptly sent to a repair shop for maintenance or replacement. Poor gear meshing inside the transmission: If abnormal noises occur in the transmission during low-speed driving and persist during acceleration and gear shifting, it may be caused by poor gear meshing inside the transmission.
2
5
Share

Are Penetrating Oil and Rust Remover the Same?

Penetrating oil and rust remover are not the same. Penetrating Oil: Penetrating oil, also known as anti-rust lubricant, is primarily composed of petroleum solvents, rust inhibitors, and lubricants. It is a multi-purpose metal maintenance product with functions such as rust prevention, rust loosening, moisture removal, lubrication, cleaning, and electrical conductivity. Rust Remover: Rust remover is an ideal lubricating coolant suitable for tapping threads on stainless steel and aluminum surfaces. Additionally, it can effectively clean and dry electronic equipment, improve conductivity, and is widely used in various industries such as manufacturing, repair, energy, and power. Differences: Penetrating oil mainly serves a lubricating function, while rust remover primarily acts to loosen rusted fasteners. The materials, methods, functions, and effects of the two differ, although both can form a protective film and have the effect of preventing metal rust.
15
5
Share

Is it necessary to apply a car wrap?

It is necessary to apply a car wrap. Invisible car wrap: An invisible car wrap is a high-performance, eco-friendly film widely used in the automotive beauty and maintenance industry. It is commonly known as a transparent paint protection film. With superior toughness, it isolates the car's paint from the air after application, providing long-lasting protection. Advantages of applying a car wrap: Enhances paint brightness and addresses paint oxidation issues. Nearly 99% of paint fading is caused by oxidation. Prolonged exposure to air and UV rays leads to oxidation and fading. An invisible car wrap effectively blocks oxygen and UV rays from contacting the paint. Protects the original factory paint and solves acid rain corrosion issues. Acid rain gradually causes paint corrosion and discoloration. The invisible car wrap has excellent corrosion resistance, shielding the paint from acid rain damage. Automatic repair of minor scratches addresses scratch problems. Vandals, metal dust, and gravel can directly cause paint scratches, with severe cases leading to permanent marks. The self-healing properties of the invisible car wrap provide excellent protection for the paint surface.
15
3
Share

What is the displacement of the Honda Avancier?

Honda Avancier offers two displacement options: 1.5T and 2.0T. Below are additional details about the Honda Avancier: 1. The Honda Avancier is equipped with an engine coded l15bd, delivering a maximum power of 142kw and a maximum torque of 243 Nm. The engine reaches its peak power at 5600 rpm and peak torque between 2000 to 5000 rpm. It features Honda's VTEC technology and direct fuel injection, with an aluminum alloy cylinder head and block. 2. The 2.0-liter turbocharged engine is coded k20c3, producing a maximum power of 200kw and a maximum torque of 370 Nm. The peak power is achieved at 6500 rpm, while the peak torque is available between 2250 to 4500 rpm. This engine also incorporates VTEC technology and direct fuel injection, with an aluminum alloy cylinder head and block.
7
5
Share

Where is the Cabin Air Filter Located in a Haval H3?

Haval H3's cabin air filter is located behind the glove compartment on the passenger side. The steps for cleaning the cabin air filter of Haval H3 are as follows: 1. Locate the cabin air filter, which is positioned behind the glove compartment on the passenger side of this vehicle. 2. Open the glove compartment, remove the two screws on top, and take out the glove compartment. 3. After removing the glove compartment, locate the internal blower installation position, remove the fixing screws, and disconnect the blower's quick connector and duct. 4. Once the blower is removed, the cabin air filter will be visible and can be taken out directly. 5. After cleaning the filter frame, install the new cabin air filter onto the frame, secure it in place, and then reinstall it into the vehicle. 6. Reinstall the blower into the vehicle, remembering to first reconnect the duct, then secure the screws and the blower's quick connector, and finally reposition the glove compartment.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.