How often should the brake pads on a Ford New Mondeo be replaced?

1 Answers
DelGabriel
07/29/25 4:50pm
Ford Mondeo brake pads should be replaced every 60,000 to 70,000 kilometers. The replacement method is as follows: 1. Before replacing the brake pads, open the cover of the brake fluid reservoir in the engine compartment to check the brake fluid level. If the brake fluid level is above the maximum limit, some should be removed to prevent overflow during replacement; 2. Prepare the new brake pads for replacement and remove the wheel where the brake is located. Be careful to avoid scratching the rim during removal; 3. Use a wrench and socket to remove the bolts of the brake caliper, then take out the brake pads (if there is a brake sensor line, remove it first). Check if the brake pads are excessively worn or have cracks. If so, proceed with the next steps of replacement; 4. Since the brake caliper may have a lot of sand or dirt, clean it thoroughly with a cloth and apply anti-squeal paste to prevent noise during braking; 5. Use a piston press to push the piston to its limit, then install the new brake pads onto the caliper. After the new brake pads are properly installed (including the brake sensor line if present), tighten the guide bolts to complete the installation; 6. After installation, cover the reservoir cap, get into the car, and press the brake pedal several times to reset the brake. Then check the brake fluid level to ensure it is within the appropriate range; 7. After replacement, test drive the car to check if the braking effect is achieved.
Was this review help?
5
5
Share
More Forum Discussions

What are the reasons for the radar not making sound in the Hongqi H5?

The reasons for the radar not making sound in the Hongqi H5 are: 1. The power cable of the main unit is not properly connected, resulting in no current; 2. The radar main unit cable has become loose; 3. The radar buzzer is damaged; 4. The wiring at the bumper is damaged. The working principle of the radar is that during reversing, it uses ultrasonic waves emitted by a probe installed on the rear bumper to hit obstacles and reflect infrasound waves, calculating the actual distance between the vehicle body and the obstacle. The functions of the radar are: 1. Accurately measuring the distance between the rear of the vehicle and the obstacle; 2. Emitting an urgent warning sound when reversing to the limit distance to remind the driver to pay attention to braking; 3. Repeatedly emitting a voice warning sound to alert pedestrians.
3
1
Share

How many cylinders does the Audi A8 have?

The number of cylinders in the Audi A8 varies depending on the engine displacement: 1. The 3.0L displacement engine has 6 cylinders; 2. The 4.2L displacement engine has 8 cylinders; 3. The 6.0L displacement engine has 12 cylinders. Taking the 2021 Audi A8 Comfort model as an example, it is a large 4-door 5-seater sedan with body dimensions of 5302mm in length, 1945mm in width, and 1483mm in height, with a wheelbase of 3128mm. The 2021 Audi A8 Comfort model is equipped with a 3.0T turbocharged engine and an 8-speed automatic transmission, delivering a maximum power of 210 kW and a maximum torque of 450 Nm. It features a front-engine, four-wheel-drive layout, with both front and rear suspensions utilizing multi-link independent suspension systems.
13
3
Share

How to reset the maintenance light on the Great Wall F7?

The method to reset the maintenance light on the Great Wall F7 is as follows: Turn off the vehicle, press and hold the trip meter reset button, turn the ignition switch to the ON position, then release the reset button. The 'Service' indicator will appear on the display. Pull out the minute button on the clock, rotate it to the right, turn off the engine, and the reminder message will reset. Then turn on the ignition switch until the 'Service' indicator disappears. The Great Wall F7 is a model under the Haval brand, with body dimensions of 4620mm in length, 1846mm in width, and 1690mm in height, and a wheelbase of 2725mm. In terms of appearance, the design of the Great Wall F7 is derived from the Haval HB-02 concept car, with a more imposing overall design. The front features a hexagonal grille and is equipped with eagle-eye-style LED headlights.
8
0
Share

How to turn on the heating in the Baojun 510 air conditioning system?

Baojun 510 air conditioning heating method: 1. The switch button for the air conditioning system is located at the bottom left corner of the vehicle's air conditioning control area. Press it to turn on the air conditioning, and the indicator light will illuminate; 2. The specific temperature value can be seen on the display screen; 3. The AC button is the compressor switch button for the air conditioning. Press it to turn on the air conditioning, and the indicator light will illuminate; 4. Adjust the air volume by sliding the left switch; 5. Adjust the temperature of the air conditioning by sliding the right switch. In terms of body dimensions, the Baojun 510 has a length of 4220 mm, a width of 1740 mm, a height of 1615 mm, and a wheelbase of 2550 mm. Regarding the suspension, the front suspension of the Baojun 510 is a MacPherson strut independent suspension, and the rear suspension is a torsion beam non-independent suspension.
9
1
Share

Where is the license plate with 'Meng D' from?

Meng D is the license plate code for Chifeng City in the Inner Mongolia Autonomous Region. The license plate codes for various regions in Inner Mongolia are as follows: Meng A for Hohhot City, Meng B for Baotou City, Meng C for Wuhai City, Meng D for Chifeng City, Meng E for Hulunbuir City, Meng F for Xing'an League, Meng G for Tongliao City, Meng H for Xilin Gol League, Meng J for Ulanqab League, Meng K for Ordos City, Meng L for Bayannur League, and Meng M for Alxa League. License plates are plates hung on the front and rear of vehicles, usually made of aluminum, sheet iron, plastic, or paper, inscribed with the vehicle's registration number, registration region, or other relevant information.
17
4
Share

What is the normal tire pressure for the Geely Binyue?

Geely Binyue tire pressure: In cold conditions, the normal range is 2.2bar to 2.3bar for the front tires and 2.4bar to 2.5bar for the rear tires. The manufacturer's recommended pressure can usually be found in the vehicle's user manual, on the label near the B-pillar of the driver's door, in the drawer next to the driver's seat, or on the back of the fuel tank cap when refueling. The Geely Binyue is an SUV model under the Geely brand, with body dimensions of 4330mm in length, 1800mm in width, and 1609mm in height, and a wheelbase of 2600mm. In terms of appearance, the Binyue adopts Geely's family design language, featuring a youthful, stylish, and robust overall shape. The front grille is paired with a sharply angled front bumper design, and the sport version model also debuts a black Geely logo with red interior trim, highlighting individuality while enhancing the sporty atmosphere.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.