How often should the brake pads of the Everest be replaced?

1 Answers
OJames
07/30/25 8:34am
The brake pads of the Everest should be replaced every 30,000 to 50,000 kilometers. When the vehicle has been driven over 30,000 kilometers, it is essential to regularly inspect the brake pads to check their actual thickness and ensure immediate replacement once they reach their wear limit. Below is more information about brake pads: 1. Brake pads are one of the critical components of a vehicle's braking system. The pressure from the braking system is transmitted through the piston caliper to the brake pads, and the friction between the brake pads and the brake disc generates the braking force that slows down or stops the vehicle. 2. Brake pads consist of three parts: a steel plate, adhesive material, and friction material. The effective part of the brake pad is the friction material layer. Once this layer is worn out, the braking performance of the pad declines, so the brake pads must be replaced when they wear down to the adhesive layer.
Was this review help?
8
2
Share
More Forum Discussions

Why Can't the Trunk of Changan CS55 Be Opened?

After parking without turning off the engine, you need to manually unlock it inside the car for someone outside to open the trunk. Here are some relevant details about the Changan CS55: 1. The body dimensions are 4500x1855x1690mm with a wheelbase of 2650mm. 2. The wheel and tire style features dual-color rims with specifications of 225/55-R18. 3. In addition to the traditional 1.5T engine, a 48V motor is installed at the front of the engine, paired with a 48V battery pack. The engine delivers a maximum power of 115kW (156 horsepower) at 5500rpm and a maximum torque of 225 N·m at 2000-4000rpm. The 48V motor provides a maximum power of 11.5kW and a maximum torque of 50 N·m. The 48V battery pack is located under the trunk floor with a capacity of 0.8kWh.
2
5
Share

Does using air conditioning in the car consume more fuel?

Using air conditioning in a car does consume more fuel because the car's air conditioning system draws power from the engine. When the air conditioning is on, it uses a portion of the engine's power, which consequently increases fuel consumption. However, the exact amount of additional fuel consumption depends on the car's engine displacement and speed. Here are some related points: 1. When the air conditioning is turned on, drivers of small-displacement cars may notice a significant drop in power. In such cases, it's advisable to accelerate gently rather than pressing the accelerator hard. 2. Regularly check the air conditioning vents. If the vents are blocked, people may unconsciously turn up the air conditioning, which also increases fuel consumption. 3. Always turn off the air conditioning before parking and turning off the engine. Otherwise, the air conditioning will automatically start the next time the car is ignited, putting extra burden on the engine and increasing fuel consumption. The correct approach is to turn off the air conditioning about 5 minutes before parking.
16
2
Share

How to Fix a Dent in a Car?

Here are the solutions for fixing a dent in a car: 1. Traditional metal sheet repair. Metal sheet repair involves restoring the deformed part of the car's metal shell. For example, if the car body shell is dented, it can be restored to its original shape through metal sheet repair. Then, by applying specialized paint, the deformed metal surface can be restored to match the undamaged areas, making it look as good as new. 2. For minor issues, contact the insurance company. The insurance company will provide compensation, and the process is quick. However, there will be no discount on the insurance premium the following year. 3. If the dent left on the car's surface after a collision does not involve peeling or paint chipping, "paintless dent repair technology" can be used. With professional tools and equipment, perfect repair results can be achieved without the need for metal sheet repair or repainting. After repair, there will be no deviation in the color or gloss of the car's paint.
3
2
Share

Is the 200tsi a 1.4T?

The 200tsi model is equipped with a 1.2-liter turbocharged engine, meaning the vehicle's displacement is 1.2 liters. The Sagitar is a compact car under the Volkswagen brand. The new Sagitar comes with two engine options: one is a 1.2-liter turbocharged engine, and the other is a 1.4-liter turbocharged engine. Here are some details about the Sagitar: 1. Body Dimensions. The Sagitar has a wheelbase of 2731mm, with length, width, and height measurements of 4753mm, 1800mm, and 1462mm respectively. 2. Powertrain Configuration. The 1.2-liter turbocharged engine in the Sagitar delivers 116 horsepower and a maximum torque of 175 Nm. This engine reaches its maximum power output at 5000 to 6000 rpm and its peak torque at 1500 to 4500 rpm. It features direct fuel injection technology and uses an aluminum alloy cylinder head and block.
11
2
Share

What maintenance items are required for a car at 40,000 kilometers?

When a car reaches 40,000 kilometers, the following maintenance items are required: 1. Replace engine oil (lubricant) and oil filter: Must be replaced every 5,000 kilometers or six months. If using full synthetic oil, it can be replaced up to every 8,000 kilometers. 2. Replace air filter and cabin air filter: The air filter and cabin air filter should be replaced every 20,000 kilometers or two years. 3. Replace fuel filter, brake fluid, and transmission fluid: For automatic transmission models, transmission fluid should also be replaced; for rear-wheel-drive vehicles, differential oil should also be replaced. 4. Tires older than four years can be considered for replacement. Brake rotors can be replaced if the brake pads have been changed three times. 5. Battery: A car battery should normally be replaced every two years. Even if the car hasn't driven 40,000 kilometers in two years, the battery should be checked for discharge.
10
1
Share

Where is the airbag computer located in the Buick Excelle?

The airbag control module is generally located in front of the gear shift lever or underneath it. Areas marked with AIRBAG or SRS in the vehicle indicate airbag locations. Use a diagnostic tool to check for faults in the airbag system, then perform repairs based on the fault codes. If no faults are detected, the system can simply clear any existing error codes. Additional information: 1. Introduction: The Buick Excelle is based on General Motors' global platform. Its prototype was GM's newly developed global mid-size sedan, primarily designed and developed by GM Daewoo Auto & Technology (GMDAT). 2. Development History: On April 21, 2003, SAIC-GM launched this all-new mid-size sedan, marketed as the "mid-range Buick" Excelle. SAIC-GM officially entered the promising mid-size car market with this new product platform - the Buick Excelle.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.