How often should the brake pads of Nissan Teana be replaced?

1 Answers
VanKennedy
07/29/25 8:24pm
Nissan Teana brake pads should be replaced every 2 years or 40,000 kilometers, depending on the vehicle's usage. Brake fluid has certain corrosive properties and strong water absorption, so a dedicated brake fluid tester can be used to check the moisture content in the brake fluid. Brake pads, also known as brake linings, are a crucial wear component in the braking system. The friction lining and friction blocks withstand external pressure to generate friction, thereby achieving the purpose of vehicle deceleration. The Nissan Teana is a flagship mid-to-high-end luxury sedan under the NISSAN brand, with body dimensions of 4901mm in length, 1850mm in width, and 1447mm in height, and a wheelbase of 2825mm. In terms of suspension, the Nissan Teana features a MacPherson independent front suspension and a multi-link independent rear suspension.
Was this review help?
10
2
Share
More Forum Discussions

What are the hazards of a loose lower control arm ball joint?

The hazards of a loose lower control arm ball joint are as follows: it can cause the vehicle to deviate from its intended path, result in abnormal tire wear, steering wheel vibration, heavy steering, and may even lead to loss of vehicle control. Below are specific details about the symptoms of a damaged lower control arm ball joint: 1. Steering wheel: At high speeds, the steering wheel may vibrate, and there may be abnormal noises when driving on bumpy roads. 2. Safety: It directly affects comfort and safety. Below is related information on repairing a lower control arm ball joint: 1. Jack: Use a jack or lift to raise the vehicle, then continuously shake the wheel to check for play and determine whether the steering linkage ball joint or the upper/lower control arm ball joint is damaged. 2. Hand shaking: Hold the tie rod or drag link and shake it left and right to check for looseness. 3. Road judgment: If abnormal noises occur when turning at large angles, it indicates damage to the ball joint.
19
3
Share

What to Do If Driver's License is Revoked? Do I Need to Retake the Test?

If your driver's license is revoked due to not being renewed for more than one year, you need to retake the subject one test; if it is revoked for other reasons, you must retake subjects one through four. Below are the specific methods for reinstating a revoked driver's license: 1. Irrecoverable situations: Death, failure to meet physical conditions, loss of civil capacity, or exceeding the specified age all make the license irrecoverable. 2. Expired without renewal: If the license has expired for less than a year, you can simply bring your ID and driver's license to the DMV for renewal. If it's over a year, you need to retake subject one and pass; if it's over three years, you need to retake all tests. 3. Blacklisted: If your license was locked/blacklisted before revocation, you must complete relevant procedures and pass the review at the DMV to unlock and remove it from the blacklist.
12
5
Share

How to Use the Air Conditioning in a 2018 Volkswagen Sagitar?

The air conditioning control area of the Sagitar is located below the center console. Activating the AUTO mode will allow the air conditioning system to automatically adjust the blower speed and airflow distribution. Below is a detailed introduction to each button of the Sagitar's air conditioning system: 1. A/C Button: Compressor switch. After activation, the compressor starts cooling. 2. FRONT Button: Front window defroster switch. When turned on, the air outlet blows air towards the front windshield. 3. REAR Button: Rear window defroster switch. When turned on, the rear windshield heating wire is activated. 4. Use of Internal and External Circulation: When driving in heavily polluted weather, be sure to switch to internal circulation mode.
13
5
Share

How to Distinguish the Authenticity of 3M Car Film?

Methods to identify the authenticity of 3M car film include: observing the appearance of the heat-insulating film, smelling the film up close, and paying close attention to the film application effect. The specific details are as follows: 1. Observe the appearance of the heat-insulating film: Inferior films usually have a darker color to block a large amount of visible light. After exposure to sunlight, the color of the film will fade, mainly because the adhesive layer of the film volatilizes after exposure, causing color changes. More alarmingly, inferior films use ordinary, cheap materials and curing processes, which can partially melt under sunlight, causing optical distortion and posing significant driving hazards. 2. Smell the film up close: You can ask the store for scraps of the heat-insulating film and smell them up close. If you detect a strong, pungent odor, it can basically be judged as an inferior film, mainly due to the use of harmful chemical adhesive layers during the film manufacturing process.
17
1
Share

Why can't the ETC card be detected?

The reasons why the ETC card cannot be detected are as follows: 1. Excessive speed causing unsuccessful information reading: When ETC vehicles pass through the ETC lane, the speed should be below 20 km/h. Excessive speed may prevent the lane from successfully reading the vehicle's device information. 2. The LED screen displays "No OBU" when inserting the card: In this case, you can first remove the card and reinsert it, then try entering the ETC lane again. If it still doesn't work, you can only go to the manual lane first. 3. OBU device issues: Sometimes problems like a dead battery or loose connection in the OBU can prevent the vehicle from passing smoothly through the ETC lane. In such cases, you can only go to the manual lane first and then visit an ETC service point for assistance. Vehicle owners should also properly store the ETC electronic tag, protecting it from moisture, water, and strong magnetic fields.
5
2
Share

Can I Charge My Phone After the Car Is Turned Off?

It is not recommended to charge your phone after the car is turned off, as prolonged charging can easily lead to battery drain, which may prevent the vehicle from functioning properly. If you need to charge your phone using the car, it is best to start the vehicle before charging. The car's battery relies on the engine for power. If the engine is not running, the battery can only supply power to electronic devices using its remaining charge, which over time can easily result in battery drain and leave the battery depleted. The battery is an essential part of the car and can be divided into traditional lead-acid batteries and maintenance-free batteries. Since the battery uses a lead-calcium alloy for the grid frame, it produces less water decomposition during charging and has lower water evaporation. Additionally, the sealed structure of the casing minimizes the release of sulfuric acid gas. Compared to traditional batteries, these batteries offer advantages such as not requiring any liquid addition, easy connection to terminals, and longer power storage duration.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.