How often should the brake fluid of the Tiguan be replaced?

1 Answers
HarrisonFitz
07/30/25 4:56am
The maintenance manual for the Tiguan specifies that the brake fluid should be replaced every 35,000 kilometers or 48 months. Precautions for using brake fluid are as follows: 1. Do not mix different types or brands of brake fluid, as differing formulations can reduce the performance of the brake fluid. 2. Replace or filter the brake fluid promptly if it absorbs moisture or contains impurities, as this can lead to insufficient braking pressure and affect braking performance. 3. If the vehicle has been driven for 40,000 kilometers or the brake fluid has been in continuous use for over 2 years, it may deteriorate due to prolonged use and should be replaced immediately. 4. If the braking feels inconsistent during normal driving, replace the brake fluid promptly. Before replacement, clean the braking system thoroughly with alcohol. 5. If the vehicle pulls to one side during braking, conduct a comprehensive inspection of the braking system. If the brake cylinder cups are found to be excessively swollen, this may indicate poor-quality brake fluid. In such cases, replace the brake fluid with a higher-quality product and also replace the cups.
Was this review help?
4
5
Share
More Forum Discussions

What sound does a bad shock absorber top mount make?

When the shock absorber top mount is damaged, it produces a metallic clanging or squeaking sound. The shock absorber is not designed to support the vehicle's weight but rather to dampen the oscillations from the spring's rebound after absorbing shocks and to absorb energy from road impacts. The spring's role is to cushion impacts by converting a single large energy impact into multiple smaller ones, while the shock absorber gradually reduces these smaller impacts. Symptoms of a damaged shock absorber top mount include: 1. Increased tire noise, with severe cases resulting in a roaring sound from the tires; 2. Reduced ride comfort; 3. Vehicle pulling to one side during straight-line driving, where the car cannot maintain a straight path despite the steering wheel being held at a constant angle; 4. Squeaking sounds when turning the steering wheel while stationary.
8
0
Share

How many types of motorcycles are there?

Motorcycles can be classified into the following categories: 1. Brand classification: Motorcycles can be divided into imported vehicles, joint venture vehicles, and domestic vehicles based on their place of origin and brand composition. 2. License classification: From the perspective of permissible driving models, there are three types: light motorcycles, ordinary two-wheeled motorcycles, and ordinary three-wheeled motorcycles. The main differences among them lie in the actual displacement and vehicle structure. 3. Displacement classification: Apart from license classification, motorcycles can also be categorized into small-displacement, medium-displacement, and large-displacement based on the actual engine displacement.
4
2
Share

What are the symptoms of a clogged automotive expansion valve?

It will cause the air conditioning compressor to operate under increased load, resulting in a situation where the AC produces cool air but fails to blow out. Here are the relevant details: 1. Cooling effect: The expansion valve converts medium-temperature, high-pressure liquid refrigerant into low-temperature, low-pressure wet vapor through throttling to achieve cooling. It controls valve flow based on temperature changes at the evaporator outlet, preventing insufficient utilization of evaporator surface area and compressor knocking. 2. Function: The expansion valve has two main functions - throttling and controlling refrigerant flow. Thermal expansion valves can be categorized as internally or externally balanced based on their balancing method. In automotive refrigeration systems, the expansion valve is one of the four major components, with the other three being the compressor, condenser, and evaporator.
7
3
Share

What is the Difference Between Beam Blades and Conventional Wiper Blades?

The differences between beam blades and conventional wiper blades are: 1. Different principles: Beam blades directly apply force to the steel strip, distributing the concentrated force evenly to maintain uniform pressure on the rubber blade; Conventional wiper blades press the blade against the windshield through multiple support points on the frame, ensuring average pressure at each support point. 2. Different working conditions: Beam blades require wiper arms with higher pressure and more powerful wiper motors; Conventional wiper blades do not. 3. Different force distribution: Beam blades distribute force across the entire rubber blade, allowing for tighter contact with the curved windshield; Conventional wiper blades transmit pressure through layered strips, resulting in uneven pressure distribution, inconsistent contact between the entire blade and the windshield, uneven wear over time, and a tendency to produce noise between the windshield and the blade.
8
0
Share

Where to Obtain the Motor Vehicle License and Registration Application Form?

Motor vehicle license and registration application forms can be obtained at the local vehicle management office. Below is relevant information about vehicle annual inspections: 1. Initial inspection: The inspection conducted to apply for a vehicle license plate is called the initial inspection. The purpose of the initial inspection is to verify whether the motor vehicle meets the conditions for applying for a license plate. 2. Definition: National regulations stipulate that motor vehicles must periodically pass inspections for exhaust emissions, vehicle appearance, lights, brakes, chassis, etc., and obtain an inspection compliance sticker provided there are no traffic violation records. All annual inspection dates are based on the registration date listed on the vehicle license. Motor vehicles must undergo safety technical inspections according to the following periods from the date of registration, commonly referred to as "annual inspection" or "annual review."
19
2
Share

2021 Honda CR-V Button Instructions

Here are the detailed instructions for the buttons in the 2021 Honda CR-V: 1. Electronic Stability Program (ESP): The system is enabled by default. 2. Parking Sensors and Camera: Alerts the driver to surrounding obstacles through images and warning sounds. 3. Recirculation/Fresh Air Mode: Recirculation mode circulates the air inside the cabin, while fresh air mode exchanges air between the inside and outside of the vehicle. Use recirculation mode in congested traffic or poor air quality environments. On highways, switch to fresh air mode approximately every hour to replenish oxygen levels inside the cabin. 4. Auto Hold: The system automatically locks the wheels. 5. Auto Start-Stop: Temporarily shuts off the engine at traffic lights.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.