How often should the brake fluid be replaced for the Teana?

2 Answers
JakeLee
07/24/25 2:41pm
Teana brake fluid should be replaced approximately every 2 years or 40,000 kilometers. Brake fluid, also known as hydraulic brake fluid or force oil, is the liquid medium in the hydraulic braking system that transmits braking pressure and is used in vehicles with hydraulic braking systems. Taking the 2021 Teana as an example, its body dimensions are: length 4901mm, width 1850mm, height 1450mm, wheelbase 2825mm, and fuel tank capacity 61.3L. The 2021 Teana is equipped with a 2.0L naturally aspirated engine, with a maximum power of 115kW and a maximum torque of 197Nm, paired with a CVT continuously variable transmission.
Was this review help?
9
1
Share
StephenLynn
08/11/25 8:24am
I've been driving my Teana for almost ten years, and regarding brake fluid replacement, the standard maintenance is to change it every two years or 40,000 kilometers. Brake fluid absorbs moisture, and over time, the increased water content lowers its boiling point. During downhill driving or emergency braking, it may vaporize and fail, which is very dangerous. I once delayed the replacement, and the brake pedal felt spongy—I almost had an accident. I rushed to the shop afterward to get it replaced. The replacement process isn't too complicated, but professional equipment is needed to drain the old fluid and ensure no air bubbles remain. I recommend handling it during regular maintenance, such as at a 4S shop or a reliable repair shop, while also checking the brake pad wear. Preventive maintenance costs little but ensures safety—don't take it lightly.
Was this review help?
16
2
Share
Expand All
More Forum Discussions

Can polishing paste be used to polish glass?

Polishing paste can be used to polish glass. However, toothpaste should not be used to polish vehicle glass, as toothpaste contains many abrasives. If too much force is applied, it can leave a frosted surface on the car window glass. It is recommended to go to a beauty salon or glass shop and use a polishing machine for polishing. Introduction to car polishing: Car polishing involves using a polishing machine with a polishing pad and polishing compound to grind the car paint at a uniform speed. It primarily relies on the cutting force of the polishing pad and the fine particles in the polishing compound to heat and soften the paint, squeezing and filling the paint around scratches into the scratches themselves. This results in a smooth and glossy car paint surface, making the scratches invisible. Precautions for car polishing: If your car needs polishing, it is advisable to go to a professional car beauty institution. Achieving the desired effect without a polishing machine is difficult, and improper operation may cause damage to the car's paint surface.
6
2
Share

What is the function of a car steering system?

The function of a car steering system is to change or maintain the direction of the vehicle. Below is a related introduction to the advantages and functions of a car steering system: 1. Advantages of the steering system: The car power steering system enhances steering sensitivity. Starting from the two main design requirements of a car steering system—steering ease and steering sensitivity—the power steering system resolves the issue of steering ease, allowing the steering gear design to select a more appropriate gear ratio based on different vehicle layout requirements to improve the sensitivity of the steering system and more reasonably choose the number of steering wheel turns. 2. Function of the steering system: The function of a car steering system is to control the direction of the vehicle according to the driver's intention. The car steering system is crucial to the driving safety of the vehicle, hence all components of the car steering system are referred to as safety-critical parts. Both the car steering system and the braking system are two systems that must be given priority for vehicle safety.
3
1
Share

How many liters of fuel are needed to fill a Haval F7?

The fuel tank capacity of the Haval F7 is 56 liters, while models equipped with the GW4B15A and GW4C20B engines have a 55-liter tank (using unleaded gasoline with an octane rating of 92 or above). Below are the steps to open the fuel tank cap: 1. Ensure the driver's side door is unlocked, then press the area near the rear of the fuel tank cap. 2. The fuel tank cap will pop open slightly. 3. Turn the cap counterclockwise to open it. 4. Secure the fuel tank cap's tether properly. 5. If you hear a sound when loosening the cap, do not continue to open it; wait until the sound stops before proceeding. 6. Spraying fuel can cause harm. Always turn off the engine when refueling, and avoid open flames or using mobile phones.
12
1
Share

What materials are needed for a driver's license renewal?

To renew a driver's license, the following materials are primarily required: ID card and its photocopy; driver's license; a medical certificate issued by a county-level or above medical institution or a military regiment-level medical institution; two one-inch white-background color photos; filling out the 'Motor Vehicle Driver's License Application Form'; and a processing fee of approximately 10 yuan. When applying, the application form should be completed, and the following documents and certificates should be submitted: (1) The identity proof of the motor vehicle driver; (2) The motor vehicle driver's license; (3) A medical certificate issued by a county-level or above medical institution or a military regiment-level medical institution. For those applying for a small automatic passenger vehicle specially for the disabled, a medical certificate issued by a specialized medical institution designated by the provincial health authority should be submitted.
7
0
Share

How is the Buick Excelle three-cylinder engine?

Here is a detailed introduction to the Excelle's three-cylinder model: 1. The three-cylinder engine of the Excelle has been optimized during production, such as adding balance shafts to reduce vibration and installing soundproofing materials in the engine compartment to minimize noise. 2. These measures help mitigate the inherent weaknesses of three-cylinder engines, bringing their performance closer to that of four-cylinder engines in these aspects. 3. Apart from the engine, other parts of the car are well-designed. Below is a specific introduction to the three-cylinder engine: 1. The advantage of a three-cylinder engine is fuel efficiency; three cylinders working may consume less fuel than four cylinders. 2. The disadvantage is the inherent imbalance of three-cylinder engines, which leads to vibration and noise. 3. When pursuing power, the wear and tear on a three-cylinder engine is greater, resulting in a shorter lifespan compared to a four-cylinder engine.
18
1
Share

Do I Need to Rewire When Replacing a Dash Cam?

Dash cams do not require rewiring as they come with original cables, so replacement is unnecessary. Some dash cams may have quality issues, whether with the device itself or its included cables, often leading to freezing during use. If the dash cam freezes and remains stuck in a certain state, first check if the power cable is functioning properly—this is usually caused by incompatible power cables. Additionally, inspect the internal memory card as it might be burnt out and require replacement. The dash cam may automatically stop recording during operation due to the massive data volume of high-definition videos filling up the memory. In such cases, you can opt for the single-loop recording mode, where videos are automatically deleted once the memory card is full. If playback of video footage shows pauses or frame skips, it could be due to errors during data storage or poor-quality memory cards. Try formatting the memory card, and always ensure you purchase genuine memory cards.
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.