···
Log in / Register

How Often Should the Boyue Undergo Maintenance?

5 Answers
DeNova
07/29/2025, 04:37 PM

Boyue requires maintenance every 5,000 kilometers. Automobile maintenance, also known as vehicle servicing, refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the vehicle. It primarily includes maintenance of the engine system, transmission system, air conditioning system, etc., aiming to keep the vehicle clean, ensure normal technical conditions, eliminate potential hazards, prevent faults, and extend the service life. The Boyue is a compact 5-door, 5-seater SUV with dimensions of 4519mm in length, 1831mm in width, and 1694mm in height, a wheelbase of 2670mm, and a fuel tank capacity of 58 liters.

Was this review help?
7
0
Share
LaHadley
08/14/2025, 01:46 PM

I've been driving a Geely Boyue for almost three years now, and I strictly follow the maintenance schedule in the manual. Typically, maintenance is required every 7,500 kilometers or six months, whichever comes first. Since I frequently commute in the city with heavy traffic, the engine undergoes significant wear, so I usually visit the 4S shop every six months for an oil change and filter replacement. If I don't drive much on highways, the mileage might not reach 7,500, and I might delay maintenance by a month or two, but not too long. Otherwise, the oil can thicken, and cooling system issues may arise, leading to trouble. Last time, I delayed it by two weeks, and my fuel consumption surged, costing me a hefty repair bill—a lesson learned. I recommend everyone not to cut corners and stick to regular maintenance to keep the car running smoothly.

Was this review help?
17
4
Share
Expand All
DelEmilia
10/16/2025, 01:33 AM

As a seasoned driver who has long been attentive to car maintenance, the user manual for the BoYue clearly states a maintenance interval of every 7,500 kilometers or six months. Turbocharged engines have high demands on oil quality and accumulate dirt quickly; delayed maintenance can lead to noticeable power loss. Road conditions also play a significant role—if you frequently drive in harsh weather or on dusty roads, it's best to shorten the interval to 5,000 kilometers for a check-up. I drive long distances often, and with proper maintenance, the engine sound remains crisp. Key steps include changing the oil filter, inspecting tires and brake pads—these small measures prevent major issues. Don't forget to have the technician check the battery voltage and transmission system during every service visit.

Was this review help?
12
5
Share
Expand All
NovaDella
11/29/2025, 01:21 AM

We don't drive our Geely Boyue much. The manual recommends maintenance every 7,500 kilometers or six months, but we might only get it checked once a year, mainly making sure the odometer doesn't exceed the limit. I've learned some simple tasks myself, like replacing the air filter, which saves a few dozen yuan on parts. Saving money is good, but don't skip professional maintenance—last time, a neighbor tried to save on one service and ended up with a coolant leak that nearly left them stranded. Regular maintenance keeps the car reliable, especially when traveling with kids—safety comes first. Now I use full synthetic oil, which lasts a bit longer, but I still don't stretch the intervals too far.

Was this review help?
5
3
Share
Expand All
MacBrayden
01/19/2026, 02:45 AM

Thirty years of driving experience tells you that the maintenance of the Boyue must not be taken lightly. The standard is every 7,500 kilometers or six months. Key maintenance tasks include oil and filter changes, as well as system checks. Neglecting these can easily lead to brake failure or steering issues, especially dangerous on slippery rainy roads. I always make it a habit to book an appointment with the 4S shop in advance, and take the opportunity to check tire pressure and brake fluid levels. Regular maintenance extends the car's lifespan, saving money by avoiding major repairs. The Boyue's engine is delicate, and only timely maintenance ensures smooth performance. Safety first—don't lose big for small savings.

Was this review help?
8
2
Share
Expand All
More Forum Discussions

What does it mean when an ETC card has no electronic tag?

An ETC card without an electronic tag means the device is currently unavailable and needs to be reinstalled and reactivated at the original processing point or any highway ETC service center. The ETC installation process is as follows: Upon receiving the device, first check if the ETC card and the electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU. A red light will briefly turn on, and the OLED screen will display "Tag Invalid" or "Please Insert Card," indicating the device is functioning normally. Clean the front windshield to ensure the glass surface is smooth, clean, and dry. Then peel off the adhesive backing of the OBU and stick it to the installation position. Press firmly for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front facing the driver and the back facing the windshield, ensuring the chip is inserted into the OBU device. ETC activation method: Insert and remove the ETC card twice in succession until the electronic tag screen displays "Bluetooth On." If "Tag Invalid" appears when inserting and removing the card twice without the electronic tag attached, this is normal and does not affect activation. Alternatively, press the button on the top of the electronic tag to enable Bluetooth directly. Turn on the phone’s Bluetooth and open the corresponding mobile app (usually a download QR code is provided on the electronic tag), then enter the device activation interface. Click "Connect Device" and wait patiently for the "Connection Successful" prompt. Once connected, upload a photo of the vehicle’s front to complete activation.
9
0
Share

How Long Does It Take to Evacuate a Car Air Conditioning System?

When evacuating a car air conditioning system, as the pressure decreases, water gradually vaporizes into steam and is extracted. This process is relatively slow, so the evacuation typically takes more than 30 minutes. Purpose of Evacuating a Car Air Conditioning System The purpose of evacuating a car air conditioning system is to remove air and moisture from the refrigeration system, which is an extremely important procedure in air conditioning maintenance. Steps for Evacuating a Car Air Conditioning System: 1. Connect the refrigeration system, manifold gauge, and vacuum pump properly. The compressor's high and low service valves should be slightly open, while the high and low manual valves on the manifold gauge should be closed. Remove the protective covers from the vacuum pump's suction and exhaust ports, and connect the middle hose of the manifold gauge to the vacuum pump's inlet and outlet. 2. Open the high and low manual valves on the manifold gauge, start the vacuum pump, and observe the low-pressure gauge needle, which should display a vacuum reading. 3. After 5 minutes of operation, the low-pressure gauge should reach 33.6 kPa (absolute pressure), and the high-pressure gauge needle should drop below the zero mark. If the high-pressure gauge needle cannot drop below zero, it indicates a blockage in the system. Stop the process, resolve the issue, and then restart the evacuation. 4. After 15 minutes of vacuum pump operation, observe the pressure gauge. If there are no leaks in the system, the low-pressure value should reach an absolute pressure of 13.28–20.05 kPa. 5. If this value is not achieved, close the low-pressure manual valve and observe the low-pressure gauge needle. If the needle rises, it indicates a vacuum loss. Check for leaks and perform repairs before continuing the evacuation. This step is known as the vacuum leak test. 6. The total evacuation time should be no less than 30 minutes. Afterward, close the low-pressure manual valve, and the system is ready for refrigerant charging.
11
4
Share

What to Do When the Car's Windshield Fogs Up?

Methods to Defog Car Windows: Press the defog button inside the car. Air Conditioning Cooling: Reduce air humidity to remove fog. Air Conditioning Heating: Use temperature difference reduction to eliminate condensation. Apply Anti-Fog Spray: Use preventive products like anti-fog spray to form a protective film, effectively preventing water vapor from condensing on the glass and forming fog. Open Windows for Airflow: Open both side windows to create airflow between the inside and outside of the car, reducing the temperature difference. Rear Window Heating: Use hot air to dry the glass. Reasons for Car Window Fogging: There is a temperature difference between the inside and outside of the car. If the temperatures differ, the surface with the lower temperature will have a lower saturated vapor pressure than the surrounding environment, causing water vapor to gather on the glass surface and form tiny droplets, resulting in fog. Methods to Defog Car Windows: Press the defog button, turn on the air conditioning cooling (A/C) switch, set the temperature to the lowest, and use the external circulation mode to defog. Both cold and warm air can defog car windows, but warm air works slower than cold air. The most effective method is using cold air, as it blows dry air directly onto the glass, preventing water vapor from condensing and achieving defogging. Other methods include using warm air, applying anti-fog spray, opening windows for airflow, and using rear window heating. Air Conditioning Cooling: Use the air conditioning's dehumidification function to reduce air humidity and remove fog. In summer, especially when multiple people enter the car, if the air conditioning is not turned on promptly, the high humidity from exhaled breath can quickly cause the windshield to fog up. Turning on the air conditioning to blow cold air onto the windshield and using the dehumidification function can quickly remove the fog. If the humidity is too high and the air conditioning is ineffective, slightly opening the windows can rapidly reduce the humidity inside the car. Combining this with the air conditioning can speed up the process. Air Conditioning Heating: Use temperature difference reduction to eliminate condensation. In winter, blowing warm air onto the glass quickly raises the temperature of the front glass, reducing the temperature difference between the inner and outer surfaces of the window and preventing excessive fogging. However, the rear and side windows heat up more slowly, so it takes longer to remove all the fog. Whether the air conditioning is automatic or manual, turning it on helps with dehumidification. Avoid setting the air conditioning to the coldest temperature, as prolonged use can cause frost to form on the outer surface of the windshield. Apply Anti-Fog Spray: Spray a small amount of anti-fog spray onto the car windows and wipe it clean to remove dirt and stains. This also leaves a thin, transparent protective film on the glass, effectively preventing water vapor from condensing and forming fog, especially useful in cold winters. Alternatives to anti-fog spray include dish soap, soapy water, glycerin, alcohol, or saltwater. After applying, let it dry and then wipe off any excess with a soft cloth. This can keep the windows fog-free for several days. Open Windows for Airflow: If the fog inside the car is not too heavy, opening both side windows can create airflow between the inside and outside of the car, reducing the temperature difference and gradually dissipating the fog. This method works on the same principle as using cold air from the air conditioning. However, opening windows has obvious drawbacks, such as being unusable during rain, snow, on highways, or when the fog is heavy. Rear Window Heating: Most cars have a rear window heating function, though the button location may vary. Turning on the rear window heating switch will usually clear the fog within about a minute.
19
1
Share

How to Check Vehicle Insurance on Mobile?

There are several ways to check vehicle insurance, one is by phone. Another is by visiting the counter. Taking third-party inquiry as an example (mainly focusing on PICC inquiry). Third-party inquiry is mainly conducted via WeChat.
12
4
Share

How to Drive an Automatic Transmission Car Through Water

Shift to second gear, press the accelerator with your right foot, and maintain a large amount of throttle until you exit the water. If you need to slow down, use your left foot to press the brake pedal. This method prevents water from entering the exhaust and allows you to safely navigate through flooded areas.
6
4
Share

How to Turn On and Off the Interior Ambient Lighting?

There is a knob for controlling the lights at the bottom left of the steering wheel. First, press this knob 1-2 millimeters. Then, turn it counterclockwise until the end to turn on the interior ambient lighting. To turn it off, rotate the knob counterclockwise back to its original position.
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.