How often should the Bestune T77 be serviced?

What to Do If You Can't Drive Your New Car Home?

Choose an appropriate time to drive. Avoid rush hours; weekends are ideal as there are fewer vehicles on the road, making the experience less stressful. Ask an experienced driver to sit in the passenger seat and guide you. Seasoned drivers can offer timely advice and support. Drive at a slower speed, stay relaxed, and take your time. The key is not to panic. Consider renting a car for a few days beforehand to familiarize yourself with driving. This will make handling your new car much easier. If the route home is challenging, it might be safer to have someone else drive initially. Practice driving yourself when road conditions are better.

13

0

Share

How to Set Up One-Touch Window Roll-Up for the Driver's Side?

The one-touch window roll-up/down button for the car is located on the driver's door armrest. It needs to be manually activated before use. Start the vehicle, place the switch in the second gear position, press the button all the way down, then lift the button to raise the window to the top. Hold each for 5 seconds without moving to successfully activate. Hold the lock button on the key for about 3 seconds, and all four window glasses will roll up simultaneously. Hold the unlock button for 3 seconds, and the window glasses will automatically roll down. When the driving speed exceeds a certain limit, the car will automatically lock, and the window glasses will automatically roll up.

3

4

Share

How to Adjust the Brake Tightness of a Wuzheng Vehicle?

First, prepare a medium-sized wrench. Locate the brake adjustment screw at the front wheel axle, which is generally positioned at the upper right side of the front wheel axle. When adjusting the brake, the front screw controls the rotation direction of the brake arm. Then, use the wrench to adjust the brake screw. Turning the adjustment screw clockwise to the right will tighten the brake, while turning it counterclockwise to the right will loosen the brake. Before checking the brake, carefully clean any dirt on the master cylinder to prevent any debris from falling into the reservoir.

2

5

Share

Can You Drive for Two Years with the Engine Yellow Light On?

You cannot drive for two years with the engine yellow light on. Below are specific details about the engine yellow light: 1. Poor Combustion State: Poor combustion state in the engine is the main reason for the engine warning light turning on. It is best to drive slowly at low to medium speeds and immediately head to the nearest repair shop for inspection. 2. Engine Knock: This manifests as weak car performance, excessive engine noise, and knocking sounds. It is not advisable to continue driving; instead, call for assistance and wait for support. 3. Fuel Quality: Poor fuel quality can lead to unclean engine cylinders and accumulated carbon deposits.

11

0

Share

What are the differences between car repairs at 4S shops and outside repair shops?

There are many differences between car repairs at 4S shops and outside repair shops, with the specific distinctions as follows: 1. Different repair materials used: 4S shops use original factory materials and parts, while outside repair shops generally use brand parts, also known as aftermarket parts. 2. Different repair techniques and experience of workers: 4S shops have more skilled repair technicians who only service a few models of the same brand, resulting in higher proficiency; outside repair shops have less experience, and the quality varies. 3. Different warranty services enjoyed by car owners: 4S shops provide consumers with all value-added services regarding car information, market trends, after-sales service, maintenance instructions, parts supply, etc. Whether for the whole vehicle or parts, they guarantee original factory products, relieving consumers of concerns about after-sales service, repairs, and maintenance. Outside repair shops generally do not provide warranty services.

1

2

Share

How to Remove the Rear Axle Shaft of Wuling Sunshine?

Use a lift to raise the vehicle, remove the front wheels, detach the locking tab on the spindle nut, and then remove the nut. Drain the transmission fluid, replace it with a new sealing gasket, and then reinstall the transmission drain bolt. Remove the lock pin and castellated nut, separate the ball joint from the steering knuckle, pull the steering knuckle outward, and use a plastic hammer to detach the outer CV joint from the front wheel hub. Use a pry bar to remove the inner CV joint from the differential, then use a punch and hammer to pry the inner CV joint of the right axle shaft from the differential, and finally remove the right axle shaft. Remove the retaining ring from the inner CV joint of the left axle shaft, then remove the retaining ring from the intermediate shaft. The disassembly is now complete.

11

1

Share

How often should the Bestune T77 be serviced?

What to Do If You Can't Drive Your New Car Home?

How to Set Up One-Touch Window Roll-Up for the Driver's Side?

How to Adjust the Brake Tightness of a Wuzheng Vehicle?

Can You Drive for Two Years with the Engine Yellow Light On?

What are the differences between car repairs at 4S shops and outside repair shops?

How to Remove the Rear Axle Shaft of Wuling Sunshine?

How to Connect Bluetooth in the Base Model of Dongfeng Peugeot 301?

What is the tire size of the Wuling Hongguang?

How to Get a New Remote Key for a Toyota Car?

How to Transfer Second-hand Motorcycle Insurance?