···
Log in / Register

How often should the air filter of Haojue 110 underbone motorcycle be replaced?

3 Answers
JoshuaLynn
07/29/25 9:30am
The replacement cycle of the air filter for Haojue 110 underbone motorcycle mainly depends on the road conditions where the vehicle is frequently driven. If the vehicle is often driven on dusty roads, it is recommended to replace it every 5,000km. If the vehicle is mostly driven on roads with less dust, it can be replaced after 10,000km. Additional information: 1. Introduction to air filters: An air filter, also known as an air filter cartridge, air cleaner, or air element, is a type of filter. It is mainly used for air filtration in engineering vehicles, automobiles, agricultural vehicles, laboratories, and various precision operation rooms. 2. Function of air filters: The air filter is installed in front of the carburetor or intake pipe to filter out dust and sand particles from the air, ensuring that sufficient and clean air enters the cylinder.
Was this review help?
10
1
Share
DonovanFitz
08/12/25 10:16am
As an experienced rider who's been using the Haojue 110 for years, the air filter replacement frequency depends on usage habits and environment. If you mainly ride in urban areas with less dust, it's recommended to replace it every 5,000 kilometers. For rural dirt roads or dusty areas, shorten the interval to every 3,000 kilometers. Neglecting timely replacement may clog the filter, causing poor engine airflow that leads to inefficient combustion, increased fuel consumption, and accelerated cylinder wear. Regular inspection is simple - just open the filter cover every 2,000 kilometers to check. If the filter paper turns black and hardens, it's time for replacement. Filters are inexpensive - keep some spares on your bike. DIY replacement is easy by following the manual instructions. Developing this maintenance habit reduces failure risks, extends your motorcycle's lifespan, and keeps it running strong.
Was this review help?
11
5
Share
Expand All
LaAliyah
10/06/25 6:13am
As someone who frequently tinkers with this type of motorcycle, I strongly recommend Haojue 110 owners to replace the air filter every 3,000 to 5,000 kilometers. The key factor is environmental impact—for instance, riding in dusty construction sites or coastal areas might mean the filter only lasts 2,000 kilometers before needing replacement. A dirty filter increases engine resistance, restricts airflow, and ultimately leads to reduced engine power, higher fuel consumption, and long-term damage to cylinder components. Checking it is simple: just open the filter box and feel for excessive dust buildup. Reinstall it only if it's still breathable. Replacement is inexpensive, costing just around ten yuan per filter, and can be done at home in minutes. Don’t wait until the warning light comes on. Regular maintenance ensures sharper throttle response and saves on repair costs.
Was this review help?
6
3
Share
Expand All
More Forum Discussions

What is the difference between the 2.0 and 2.5 displacement of the Atenza?

The differences between the 2.0 and 2.5 displacement of the Atenza: 1. The Atenza 2.0L is a naturally aspirated engine with a maximum of 158 horsepower. The Atenza 2.5L is also a naturally aspirated engine but with a maximum of 192 horsepower. 2. Both the 2.0 and 2.5 versions offer excellent handling, but the 2.5 provides stronger power when driving, and its transmission efficiency is several points higher than that of the 2.0. 3. Appearance differences: The entry-level version of the 2.5 Atenza comes equipped with 19-inch wheels. Larger wheels greatly enhance the car's appearance, as big wheels can cover many flaws. Moreover, the Atenza's design is already excellent, and the 19-inch wheels add the icing on the cake, making a significant visual difference. Therefore, choosing the 2.5 just for these larger wheels is worth it.
16
4
Share

Does 'e' Stand for Exhaust Valve or Intake Valve?

The full name of 'e' is exit, which means exhaust, while 'i' represents intake, being the abbreviation of 'in'. More details about valves are as follows: 1. The function of a valve is specifically responsible for introducing air into the engine and expelling the exhaust gases after combustion. In terms of engine structure, valves are divided into intake valves (intake-valve) and exhaust valves (exhaust-valve). The intake valve's role is to draw air into the engine to mix with fuel for combustion; the exhaust valve's role is to expel the burned exhaust gases and dissipate heat. 2. The valve head operates at very high temperatures (intake valve 570~670K, exhaust valve 1050~1200K) and also withstands gas pressure, the force of the valve spring, and the inertial force of the transmission components. With poor lubrication and cooling conditions, valves must possess certain strength, stiffness, heat resistance, and wear resistance. Intake valves are generally made of alloy steel (chromium steel, nickel-chromium steel), while exhaust valves are made of heat-resistant alloys (silicon-chromium steel). Sometimes, to save on heat-resistant alloy materials, the head of the exhaust valve is made of heat-resistant alloy, and the stem is made of chromium steel, after which the two parts are welded together.
18
1
Share

What does 17×7.5j mean in wheel specifications?

The wheel size 17×7.5j can be interpreted as follows: The number 17 refers to the wheel diameter in inches, indicating a 17-inch wheel. The number 7.5 represents the wheel's cross-section width in inches. The letter 'j' denotes the shape and height of the wheel flange. The 'X' in the middle does not signify length × width as commonly understood, but rather indicates that the wheel is of a one-piece deep well type, typically used for passenger vehicles. In contrast, large trucks and specialized wheeled machinery often employ semi-deep well wheels. The advantages of larger wheel sizes are as follows: 1. Larger wheels offer greater load-bearing capacity. Smaller wheels often use steel materials to save costs, whereas larger wheels typically employ aluminum alloy, especially those made by forging processes. The load-bearing capacity of such wheels is five times that of ordinary steel wheels. 2. Larger wheels improve the vehicle's cornering performance. After wheel modification, the increased contact area enhances stability during turns, significantly boosting the vehicle's cornering capability. 3. Larger wheels may reduce ride comfort. Generally, the overall tire diameter remains constant, meaning larger wheels result in thinner tire sidewalls. This reduces the tire's ability to dampen road noise, leading to increased cabin noise and compromised interior quietness.
9
3
Share

What maintenance should be done for a car with 70,000 kilometers?

For a car with 70,000 kilometers, the following maintenance should be performed: 1. Consider replacing the tires. When a car reaches over 70,000 kilometers, the tire tread is usually severely worn, and the rubber may have aged. For driving safety, it is recommended to replace the tires. 2. Replace the transmission fluid. Transmission fluid has a usage cycle and generally needs to be replaced every 2 years or 40,000 kilometers. 3. Clean the three-way catalytic converter. As the vehicle's mileage increases, carbon deposits from the engine can clog the three-way catalytic converter, leading to poor acceleration and failing emission standards. The cleaning cycle for the three-way catalytic converter is typically every 30,000 to 40,000 kilometers. It is recommended to clean it at this point. 4. Inspect the vehicle's suspension and various rubber bushings. These rubber bushings play a role in supporting and stabilizing the vehicle's engine. Over time, rubber aging can cause various noises from the chassis while driving. Therefore, it is recommended to inspect the suspension system.
11
2
Share

What is the difference between Audi RS7 and RS7R?

Here are the differences between Audi RS7 and RS7R: 1. Different engines: (1) The Audi RS7 is equipped with a 4.0T engine, paired with an 8-speed automatic transmission. The 4.0T engine has a maximum output power of 445 kW, a maximum torque of 750 Nm, a top speed of 250 km/h, a 0-100 km/h acceleration time of 3.7 seconds, and a combined fuel consumption of 10L/100 km as announced by the Ministry of Industry and Information Technology. (2) The Audi RS7R will be equipped with an upgraded 4.0T V8 turbocharged engine, with a maximum power output of 552 kW. The transmission system will be paired with an 8-speed automatic transmission and equipped with a four-wheel-drive system. 2. Optimizations of the Audi RS7R: (1) The front grille has been upgraded and optimized, giving it a more sporty feel compared to the base model. The rear features a dual-exhaust layout, and the tailgate is adorned with an exclusive ABT badge. (2) The interior is equipped with a flat-bottom sport multifunctional steering wheel, and carbon fiber wrapping is added at the 12 o'clock and 6 o'clock positions.
5
2
Share

How to Disassemble and Assemble the Power Steering System?

The disassembly and assembly method of the power steering system is as follows: 1. Lift the vehicle and remove the tie rod fixing nut. 2. Remove the steering gear bolts and loosen the oil inlet pipe of the control valve housing. 3. Remove the left self-locking nut of the rear cross plate and the bolt that fastens the rack and steering tie rod. 4. Remove the lower cover on the side of the instrument panel, the ventilation pipe, and the pedal cover, and then remove the steering gear. Extended content: Precautions for disassembling and assembling the power steering device: 1. The disassembly and assembly should be carried out carefully, especially the control valve spool should be prevented from tilting during the process to avoid damaging or scratching the working surface of the parts. 2. Special attention should be paid to protecting sealing elements, such as oil seals, sealing rings, piston rings, etc. Avoid scratching or scuffing their working surfaces when passing through edges, splines, and threads. If necessary, use tools such as guide sleeves for disassembly and assembly. After installation, the O-ring should be free of distortion. 3. Keep the parts clean during the assembly of hydraulic components. Rubber seals should be cleaned with hydraulic oil or alcohol, and gasoline or kerosene should not be used. After cleaning, the parts should be dried with compressed air and should not be wiped with cotton yarn. During assembly, a small amount of hydraulic oil should be applied to the surface of the parts.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.