How Often Should the Air Filter and Cabin Air Filter in a Car Be Replaced?

1 Answers
ElleLee
07/29/25 10:50pm
The car's air filter should be replaced every 15,000 kilometers and cleaned every 5,000 kilometers; the cabin air filter should be replaced every 20,000 kilometers and cleaned every 10,000 kilometers. The air filter is mainly used for air filtration in engineering vehicles, automobiles, agricultural vehicles, laboratories, sterile operating rooms, and various precision operating rooms. The cabin air filter can absorb fine particles, alleviate respiratory discomfort, reduce irritation for allergy sufferers, and protect the air conditioning cooling system. Failure to replace the air filter will lead to increased dust and debris, affecting engine operation; not replacing the cabin air filter can result in bacterial growth being discharged into the car interior through the ducts, which is harmful to human health. Therefore, regular replacement is necessary.
Was this review help?
7
5
Share
More Forum Discussions

How to Check Tire Pressure on the Dashboard?

To check the tire pressure on the dashboard: 1. Press the SET button to inspect the tire pressure of all four wheels; 2. Ensure all tire pressures are at normal levels before starting the car; 3. Press and hold the tire pressure monitoring switch until you hear a beep. The car's tire pressure monitoring system automatically and continuously monitors various tire conditions by recording the rotation speed of the tires or through electronic sensors installed in the tires, providing effective safety assurance during driving. The functions of the car tire pressure monitoring system include: 1. Preventing accidents; 2. Extending the service life of the tires; 3. Making driving more economical; 4. Reducing wear on the suspension system.
11
2
Share

What is the difference between 1.5L and 1.6L cars?

The differences between 1.5L and 1.6L cars are: 1. Different engine displacement: The 1.5L refers to a naturally aspirated engine with a displacement of 1.5 liters, which is 1496ml; the 1.6L refers to a naturally aspirated engine with a displacement of 1.6 liters, which is 1592ml. 2. Different cylinder bore diameter: The 1.5L has a cylinder bore diameter of 80mm; the 1.6L has a cylinder bore diameter of 85mm. 3. Different piston stroke: The 1.5L has a piston stroke of 90mm; the 1.6L has a piston stroke of 93mm. Displacement is a specialized term in hydraulic transmission, referring to the volume of fluid inhaled or discharged per stroke or cycle, and is an important parameter for measuring a car.
18
5
Share

How does a car reversing radar determine distance?

Car reversing radar determines distance by: judging the distance through sound. The alarm emitted by the reversing radar is a beeping sound at a certain frequency, and the frequency increases as the obstacle gets closer. When the beeping frequency becomes faster and is accompanied by a continuous sound, it indicates that the vehicle is getting closer to the obstacle. The reversing radar mainly consists of ultrasonic sensors, a controller, and a buzzer. Its functions are: 1. Accurately measuring the distance between the rear of the car and the obstacle; 2. Emitting rapid warning sounds to alert the driver to brake when reversing to a dangerous distance; 3. Repeatedly emitting voice warnings to remind pedestrians to pay attention.
11
4
Share

How to Drive a Semi-Automatic Transmission Car?

The driving method for a semi-automatic transmission car is: 1. Confirm the gear position, start the car with the gear in P (Park) and the brake pedal pressed; 2. Press the gear lever lock button, pull the gear lever backward to engage the gear, and remember to release the handbrake after shifting; 3. N (Neutral) is used for brief stops like at traffic lights; 4. D (Drive) is for forward movement during normal driving, where the transmission will automatically shift up or down as you press or release the accelerator; 5. R (Reverse) is for reversing the car. Precautions for using the gears in a semi-automatic transmission car are: 1. Only use the reverse gear after the car has come to a complete stop, and avoid coasting in N (Neutral); 2. When the car is moving in D (Drive), you can only switch to manual mode; 3. Do not press the accelerator when changing gears; 4. If the gear lever accidentally shifts to N (Neutral) while driving, release the accelerator and wait for the engine to idle before shifting back to D (Drive).
15
1
Share

What to Do If There Is a Small Cut on the Side of the Tire?

The solution for a small cut on the side of the tire depends on the extent of the damage: 1. If the cut has damaged the internal cord material or the tire is already ruptured, it is not recommended to repair it, and the tire needs to be replaced; 2. If the cut has not damaged the cord material, the tire can continue to be used, but it is necessary to regularly check whether the wound expands or if the cords are damaged; 3. Regularly check the tire pressure and inflate according to the front and rear tire pressure recommended by the vehicle brand, car manufacturer, and tire manufacturer. Tire maintenance methods include: 1. Maintain the correct air pressure as required while driving; 2. Under no circumstances should you exceed the driving conditions required; 3. Frequently check the condition of the tires; 4. Stop using the tire when the wear reaches the wear indicator mark; 5. The spare tire should be kept away from sunlight, oil, acid, and hydrocarbons.
8
2
Share

What are the differences between the Red Badge Civic and the regular Civic?

The differences between the Red Badge Civic and the regular Civic are: 1. Different engines: The Red Badge Civic is equipped with a 2.0-liter turbocharged engine; the regular Civic comes with a 1.0-liter turbocharged engine and a 1.5-liter turbocharged engine. 2. Different transmissions: The Red Badge Civic is paired with a 6-speed manual transmission; the regular Civic is matched with a CVT transmission. 3. Different maximum horsepower: The Red Badge Civic has a maximum horsepower of 310 hp, while the regular Civic has maximum horsepower ratings of 125 hp and 177 hp. 4. Different maximum torque: The Red Badge Civic has a maximum torque of 400 Nm; the regular Civic has maximum torque ratings of 173 Nm and 226 Nm.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.