···
Log in / Register

How often should the 10th generation Accord undergo major maintenance?

4 Answers
Zara
09/06/25 7:05am

The maintenance interval for the Accord is every 5,000 kilometers. After each maintenance service, it is necessary to reset the maintenance light and related parameters. Below are some maintenance precautions: 1. Avoid running the engine for extended periods in an unventilated garage. Engine exhaust contains carbon monoxide, an invisible and odorless toxic gas. Prolonged exposure to low concentrations of carbon monoxide can cause symptoms such as headaches, rapid breathing, nausea, vomiting, weakness, dizziness, mental confusion, and even brain damage. If you must start the engine in a garage, keep the garage door open or turn on the ventilation system to allow exhaust fumes to escape. Even when working outdoors, avoid staying near the exhaust pipe of a running engine for too long. 2. Never siphon gasoline with your mouth. Gasoline is not only flammable and explosive but also toxic, especially leaded gasoline, which can harm the nervous system, digestive tract, and kidneys. Additionally, gasoline contains high concentrations of sulfides, and hydrogen sulfide is also toxic. Ingesting gasoline can lead to poisoning or death. If accidentally ingested, induce vomiting immediately and seek medical treatment promptly.

Was this review help?
9
1
Share
MacNora
09/18/25 6:46am

I've been driving a 10th-generation Accord, and I usually go for a major maintenance service every two years or after driving 30,000 to 40,000 kilometers. This allows for a comprehensive check of key components like the engine and brakes, replacing old fluids to ensure the car stays in good condition. My car mostly runs on city roads, and when it's time, I take it to the 4S dealership—they handle everything meticulously, including transmission fluid and spark plug replacements. Regular maintenance extends the car's lifespan and keeps it running smoothly. Skipping it can lead to expensive and troublesome repairs later. So, I recommend keeping track of mileage or time—it's super simple and keeps your car well-maintained.

Was this review help?
9
4
Share
Expand All
Ursula
11/01/25 7:13am

From a user experience perspective, the 10th-generation Accord only requires a major service approximately every 30,000 kilometers, with the time interval not exceeding four years. My car has already covered over 50,000 kilometers and has undergone several major services, each including oil filter replacement, air filter replacement, and cooling system inspection. Honda's design is durable, but regular maintenance helps prevent minor issues from escalating. If you drive frequently, prioritizing mileage control is sufficient. Remember, timely maintenance can even save you some fuel costs while ensuring a smoother and more reassuring driving experience overall.

Was this review help?
7
2
Share
Expand All
McSara
12/15/25 7:21am

I think a major service every two years is quite appropriate. Maintaining the 10th-generation Accord this way is both efficient and convenient. The service includes changing the engine oil and brake fluid, along with a comprehensive system inspection. Following this interval ensures fewer car issues, giving me much more confidence when driving long distances. Regular maintenance saves both time and hassle.

Was this review help?
12
1
Share
Expand All
More Forum Discussions

What is the number of teeth on a gear?

Generally, the number of teeth on a gear is taken as m≥2. Within the same gear group, gears with the same modulus should be used as much as possible; gears with different moduli are only used under special circumstances, such as the final expansion group or back gear group, but generally no more than two types. The principle for determining the number of gear teeth is: compact gear structure size and small spindle speed error. The following is a related introduction about gears: 1. Composition: Generally, it consists of teeth, tooth grooves, end faces, normal faces, addendum circles, dedendum circles, base circles, and pitch circles. 2. Introduction to components: Each protruding part used for meshing, these protruding parts are generally arranged radially, and the teeth on the paired gears contact each other, enabling the gears to continue meshing and operating; the tooth groove is the space between two adjacent teeth on the gear; the end face is the plane perpendicular to the axis of the cylindrical gear or cylindrical worm; the normal face refers to the plane perpendicular to the tooth line of the gear; the addendum circle refers to the circle where the top of the tooth is located; the dedendum circle refers to the circle where the bottom of the groove is located.
2
5
Share

Is the Internet of Vehicles the built-in network of a car?

Internet of Vehicles does not mean being able to access the internet inside a car. It is a massive interactive network. According to the definition by the China IoT Industry Alliance, the Internet of Vehicles (IoV) is a huge interactive network composed of information such as vehicle location, speed, and route. Through devices like GPS, RFID, sensors, and camera image processing, vehicles can collect environmental and status data about themselves. Using internet technology, all vehicles can transmit and aggregate their various information to a central processor. Through computer technology, this vast amount of vehicle information can be analyzed and processed to calculate the optimal routes for different vehicles, report road conditions in real-time, and adjust traffic signal cycles. The built-in 4G network in a car operates using a bound SIM card. The principle of using the built-in 4G network in a car is the same as that of a mobile phone SIM card. Although both the car's 4G network and mobile phone networks use bound SIM cards, the SIM card for cars is specially designed and built into multifunctional vehicles. Even if a mobile phone SIM card could be inserted into a multifunctional vehicle, the system would not recognize it, so the two are not interchangeable.
3
2
Share

Can You Stop During the Second Driving Test?

You can stop during the second driving test. During the second driving test, stopping is allowed as long as it is not an illegal parking. Here is some relevant information about the second driving test: Overview: The second driving test, also known as the small road test, is part of the motor vehicle driver's license assessment and is referred to as the field driving skills test. For small vehicles C1 and C2, the test items include five mandatory components: reversing into a parking space, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves (commonly known as S-curves). Some regions may also include a sixth item: high-speed toll card collection. Teaching Assistance: Teaching Software: Students can learn traffic regulations through driver simulation test software on mobile phones or computers. Teaching Books: "Safe Driving Starts Here," compiled by the Ministry of Transport of the People's Republic of China. Driving schools can uniformly purchase and distribute driving study materials, or students can purchase the materials at their own expense.
18
1
Share

Can You Still Drive a Car with a Flat Tire?

You should not continue driving with a flat tire. Here are the relevant details: Hazards of a flat tire: Continuing to drive with a flat tire can cause significant damage to the vehicle's suspension, transmission, and other systems, and may also deform the wheel rim. Most importantly, it endangers personal safety. As the tire loses its support, the stability of the vehicle body severely decreases, making it highly prone to traffic accidents. Therefore, the immediate priority is to slow down gradually and park the car in a relatively safe place to replace the spare tire or call for assistance. Run-flat tires in case of a flat: Of course, run-flat tires offer relatively higher safety. Even after a flat, they do not lose pressure instantly like regular tires. Their sturdy sidewalls can support the car to drive at speeds below 80km/h for about 80 kilometers. However, it's important to note that if the damage area of the run-flat tire is too large, you should not continue driving as it still poses certain safety risks.
6
0
Share

Can You Still Drive When the Exhaust Malfunction Light Is On?

When the exhaust malfunction light is on, you can still continue driving. Not all exhaust malfunction lights indicate that the vehicle cannot be driven. If the engine malfunction light is on, there are no abnormal noises in the engine compartment, no other abnormal warnings on the dashboard, the vehicle's power is unaffected, and the transmission shifts normally, you can continue driving to a 4S shop for further diagnosis. Issues such as intake or exhaust problems may trigger the engine malfunction light. Introduction: This commonly referred to exhaust malfunction light is also known as the fuel injection system malfunction light. As long as there are no unusual changes in engine power or sound, you can continue driving. This is because the ECU (Engine Control Unit) has a fault substitution program. If any sensor among the many sensors fails, the ECU will use pre-set backup parameters to replace the faulty sensor's data to prevent the vehicle from stalling. For example, if the coolant temperature sensor fails, the ECU will use a backup value of 80 degrees Celsius as the control parameter for fuel injection and ignition. Therefore, while driving is possible, timely repairs are still necessary. If not addressed promptly, the following issues may arise: Deterioration in exhaust gas quality, leading to environmental pollution; increased fuel consumption; elevated combustion chamber temperature and accelerated wear, causing faster engine deterioration; increased engine noise, affecting driving and passenger comfort.
15
3
Share

What is the Hand Signal for Prohibiting Forward Vehicle Movement?

The hand signal for prohibiting forward vehicle movement is to extend the left arm straight upward with the palm facing forward. Below is relevant information about the passing scores for the driver's license test: 1. Subject 1: Road traffic safety laws, regulations, and related knowledge test. It is a written test conducted on a computer, with a full score of 100. A score of 90 or above (including 90) is required to pass. 2. Subject 2: Field driving skills test. It is a practical test conducted in a designated area, with only pass or fail results. The test includes five mandatory items performed in sequence: reversing into a parking space, parallel parking, S-curve driving, right-angle turning, and hill start and stop. The full score is 100, and a score of 80 or above (including 80) is required to pass. 3. Subject 3: Road driving skills test. It is a practical test conducted on a road or simulated area, with a full score of 100. For large buses, a score of 90 or above is required to pass; for large trucks, 80 or above; and for other vehicle types, 70 or above. 4. Subject 4: Safe and civilized driving knowledge test. It is a written test with a full score of 100, and a score of 90 or above (including 90) is required to pass.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.