How often should small cars be inspected in 2021?

2 Answers
MacCarson
07/24/25 4:22am
2021 vehicle inspection regulations came into effect on November 20, 2020. Non-operational small and mini passenger vehicles with 7 to 9 seats within 6 years are included in the exemption range. For non-operational small and mini passenger vehicles over 6 years but less than 10 years, the inspection frequency is adjusted from once a year to once every two years, specifically in the 6th and 8th years. The following four situations are not eligible for the exemption policy: 1. Situation one: minivans. 2. Situation two: vehicles that have been illegally modified and legally penalized. 3. Situation three: vehicles involved in traffic accidents causing casualties. 4. Situation four: vehicles that have not been registered for more than 4 years since the date of manufacture are not eligible for the 6-year exemption policy.
Was this review help?
17
2
Share
JessicaLynn
08/11/25 12:00am
As an ordinary person who drives frequently, I noticed significant changes in the 2021 vehicle inspection rules. For my small car, if it's a non-commercial private vehicle, within the first six years after registration, I only need to apply for the exemption inspection label online every two years without an on-site inspection. Specifically, for a car purchased in 2021, the first application is due in 2023, followed by another in 2025. The process is straightforward and can be completed via the Traffic Management 12123 App. It's not until 2027 that an actual on-site vehicle condition test is required every two years. This policy is thoughtfully designed, saving queuing time and promoting environmental protection. However, don't take it lightly—applying for the label on time is crucial to avoid fines and penalty points. Regular maintenance of brake lights or tires also impacts safety, so don't wait until the inspection to fix them. Overall, proper planning can save both hassle and money.
Was this review help?
15
3
Share
Expand All
More Forum Discussions

How to Set the Automatic Tilting of Rearview Mirror When Reversing for Mercedes-Benz E-Class?

There are five steps to set the automatic tilting of the rearview mirror when reversing for Mercedes-Benz: 1. Step on the brake and shift into reverse gear. 2. Press the right rearview mirror adjustment button (the button light will turn on). 3. Adjust the tilting angle of the rearview mirror using the cross-shaped directional buttons (up, down, left, right). 4. Wait for 5 seconds, then shift back to N (Neutral) or P (Park) gear. 5. After this, whenever you shift into reverse gear, the right rearview mirror will automatically tilt to the set angle. More relevant information is as follows: Before reversing, press the left rearview mirror adjustment button (the button light will turn on). At this time, if you shift into R (Reverse) gear, the right rearview mirror will not tilt. Press the right rearview mirror button again, and the right rearview mirror will then automatically tilt.
3
4
Share

How to Remove the Wrench Icon on Volkswagen Bora?

Method to remove the wrench icon on Volkswagen Bora: First, turn off the ignition. Press and hold the 0.0 button at the bottom right corner with your left hand, then turn on the ignition with your right hand (do not start the engine, and keep holding the button with your left hand). At this point, a non-flashing wrench symbol will appear on the dashboard. Release the left hand and press the button at the bottom left corner once, and the wrench symbol will disappear. Here’s some information about the wrench icon: 1. The "wrench" alert is designed to remind the owner to perform scheduled maintenance based on mileage, featuring a maintenance reminder function. 2. Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the vehicle, also known as vehicle upkeep. Modern car maintenance mainly includes the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. The purpose of car maintenance is to keep the vehicle clean, maintain normal technical conditions, eliminate potential hazards, prevent failures, slow down the deterioration process, and extend the service life.
12
3
Share

How many kilometers should the Qashqai's transmission oil be changed?

The transmission oil of the Qashqai should be changed after the vehicle has been driven for more than 60,000 kilometers. The specific replacement cycle for the transmission oil can be referred to in the vehicle's maintenance manual. Transmission oil is a lubricant that keeps the gear system clean, lubricates and extends the life of the transmission components, and provides effective lubrication even at low temperatures. The following are the potential hazards of not changing the transmission oil for a long time: 1. Deterioration and evaporation under high-speed and high-temperature conditions: Transmission oil can deteriorate and evaporate when exposed to prolonged high-speed and high-temperature conditions, which can accelerate the wear of mechanical components and, in severe cases, damage internal transmission parts. 2. Weak acceleration when the car is cold: If the transmission oil is not changed for a long time, the car may experience weak acceleration when starting cold. 3. Thickening of transmission oil, which can block the transmission cooler: This can lead to overheating of the transmission oil, increasing wear. 4. Slight slipping during driving: Failure to change the transmission oil on time can result in slight slipping and other similar phenomena while driving.
13
1
Share

Which has a lower failure rate, the Geely Vision X3 or the Chery Tiggo 3X?

Compared to the Chery Tiggo 3X, the Geely Vision X3 has a lower failure rate. Below are the specific differences between the Geely Vision X3 and the Chery Tiggo 3X: 1. Powertrain: The Tiggo 3X is equipped with a 1.5L engine and a CVT transmission (simulating 9 gears), producing 116 horsepower, with a maximum power of 85KW and a maximum torque of 143Nm. Its official combined fuel consumption is 6.8L/100km. The Vision X3 is also equipped with a 1.5L engine and a CVT transmission, producing 109 horsepower, with a maximum power of 80KW and a maximum torque of 142Nm. Its official combined fuel consumption is 6.1L/100km. 2. Features: The Tiggo 3X's distinct features include 17-inch wheels, tire pressure display, auto hold, seat heating, 4 speakers, and LED lights. The Vision X3's distinct features include 16-inch wheels, tire pressure warning, a dashcam, 6 speakers, halogen lights, and anti-pinch power windows.
19
3
Share

What are the differences between Karry K60 and Karry K50?

The detailed differences between Karry K60 and Karry K50 are as follows: 1. Different positioning, Karry K60 is an SUV, while K50 is a family MPV. 2. As an SUV, the K60 has a more upscale and dignified appearance. 3. The configurations are also different, such as the steering wheel, center console, and lighting configurations. Detailed information about Karry K60 and K50 is as follows: 1. The Karry K50 has good space performance, with a 2+2+3 seating layout, making it very practical for daily use. The stepped seating arrangement allows rear passengers to see forward without feeling cramped. The driver sits in the first row with a broad view, and the second row features independent seats. 2. In terms of safety features, the Karry K50 was designed from the outset with a sedan chassis, offering far superior safety compared to models modified from traditional van chassis. The cage-style body design incorporates high-strength steel in key areas, effectively enhancing the overall vehicle strength. 3. The Karry K60 comes standard with top-tier Bosch-ABS anti-lock braking system and EBD brake force distribution system. The body is constructed with high-strength all-metal enclosed load-bearing structure, providing maximum protection for the driver.
11
1
Share

What is the difference between the Lingdu 230 and 280?

The difference between the Lingdu 230 and 280 lies in the power tuning of their engines. The 230 engine delivers 131 horsepower, while the 280 engine produces 150 horsepower. The 1.4T high-power version features a more aggressive engine tuning. Apart from these differences in power tuning, there are no other distinctions between these two engines. Additional information: 1. In simple terms, the Lingdu 230 refers to a vehicle acceleration time that is 2.3 times that of the same displacement, while the Lingdu 280 is 2.8 times, as this car uses a turbocharged engine. As a compact sedan, the car's power performance can be described as excellent. The Lingdu primarily promotes the 1.4T high-power version, but market sales indicate that the 1.4T low-power version sells the most, as its engine is entirely sufficient for this car. 2. If the buyer's budget is ample, it is advisable to opt for the high-power 280 version, which enhances the vehicle's overall power performance. The engine performs exceptionally well at low and medium speeds, with a particular advantage in low-speed torque.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.