How Often Should Shock Absorbers Be Replaced?

1 Answers
SpencerFitz
07/24/25 3:20am
Shock absorbers should be replaced every 80,000 to 100,000 kilometers. Over time, the vehicle's vibration filtering performance will deteriorate significantly, potentially affecting handling aspects such as braking and cornering. If the daily driving route has poor road conditions, this will accelerate the wear of the shock absorbers, and owners should replace them in advance to avoid driving safety issues. The impact of damaged shock absorbers on the vehicle: 1. If one shock absorber is leaking oil, it will cause the vehicle body to become unbalanced, with one side higher than the other, leading to automatic deviation while driving and exacerbating irregular tire wear; 2. If the shock absorber top rubber ages and falls off, it will cause the shock absorber to collide with other components, resulting in abnormal noises. Most abnormal noises from the chassis are due to this reason; 3. If the shock absorber spring becomes weak and lacks sufficient extension force, the shock absorption and cushioning effects will be greatly reduced, increasing the hydraulic pressure on the shock absorber and leading to oil leakage.
Was this review help?
1
4
Share
More Forum Discussions

Why was the Zontes 310 discontinued?

According to feedback from netizens, it was due to internal management issues that led to a lack of employee responsibility. Below are the specific details about the Zontes 310: 1. Power: It features a single-cylinder, water-cooled, four-valve 312cc engine with a maximum power of 26kW. As a rally bike, it comes with added weight from accessories like crash bars, windshields, handguards, and a rear rack, achieving a 0-100km/h test time of 6.8 seconds. 2. Configuration: It includes an electric windshield, keyless start, LED headlights, a full LCD instrument panel with a small storage space underneath, Bosch ABS system, and both sport and comfort modes.
9
5
Share

Does Auto Start-Stop Damage the Engine?

Auto start-stop does not damage the engine. Engine wear primarily occurs during cold starts, and frequent restarts do not cause significant wear. The engine relies mainly on oil film lubrication, and auto start-stop durations are very short. The oil pumped up by the oil pump does not completely drain back, leaving sufficient lubrication on the components. During a hot restart, the engine's speed and timing are minimally affected. When the vehicle restarts after a brief stop, the engine is already at normal operating temperature, reducing startup resistance. Auto start-stop efficiency also depends on factors like engine displacement, technology used, and the duration of stops (e.g., at traffic lights). Larger displacement engines and longer idle times result in greater fuel savings, with more noticeable fuel efficiency benefits the longer the engine remains off.
18
3
Share

What is the function of the mode button?

The function of the mode button depends on its location: 1. If the mode button appears on the gear shift control panel, it means the mode button can switch between various driving modes of the car. At this time, you can use the mode button to select the appropriate driving mode according to the actual road conditions. 2. When the mode button appears on the multifunction steering wheel, it means the mode button can switch between different multimedia functions, such as adjusting the radio audio or switching between various modes. 3. If the mode button is located in the air conditioning control area of the center console, it means the mode button can switch between different air conditioning blowing modes. 4. The mode button exists to facilitate the driver in controlling various modes of the car, helping the driver to stay focused and ensuring safety during the journey.
7
5
Share

When is the first maintenance for Chevrolet Cavalier?

Chevrolet Cavalier's first maintenance is generally at three months or between 3,000 to 5,000 kilometers, whichever comes first. Subsequent maintenance intervals are every 5,000 kilometers. For the first maintenance, only the engine oil and oil filter need to be replaced. The first maintenance refers to the initial check-up after the vehicle's break-in period. The following are the precautions for the first maintenance: 1. The first maintenance is the initial part of the vehicle's regular maintenance, and most manufacturers offer it for free. 2. The first maintenance date is calculated based on the vehicle's purchase date. According to relevant regulations, exceeding the first maintenance date is considered as voluntarily waiving the right to the first maintenance.
12
0
Share

Where is the Corolla radiator located?

Corolla radiator is located at the front of the engine, right behind the front grille where air enters. Car radiator generally refers to the cooling radiator. As part of the automobile cooling system, the radiator in engine water cooling system consists of three parts: water inlet chamber, water outlet chamber, main plate and radiator core. The maintenance methods for car radiator are as follows: 1. The liquid level should be maintained between min and max marks. If it's below min, you need to add coolant of the same brand and specification, or replace all coolant completely. 2. Generally, antifreeze should be replaced every 20,000 kilometers or one year; never add tap water when there's no antifreeze available.
13
2
Share

How to Turn on Cadillac Seat Ventilation?

Cadillac ATSL's seat ventilation requires aftermarket installation. Relevant information is as follows: 1. Function: The seat ventilation system continuously delivers cool air through small holes in the seat cushion and backrest, preventing sweat accumulation on the hips and back, and providing a comfortable riding environment. Seat ventilation is divided into front seat ventilation and rear seat ventilation. 2. Classification: Front seat ventilation is divided into air-supply type and air-suction type. The principle of front seat ventilation is to use a fan to inject air into the seat, which flows out through small holes on the seat surface to achieve ventilation. Seat ventilation effectively improves the air circulation environment between the body and the seat surface, ensuring that the contact area remains dry and comfortable even during long drives.
3
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.