How Often Should Semi-Synthetic Motor Oil Be Changed?

Is it necessary to service a car every 5,000 kilometers?

It is necessary to service a car every 5,000 kilometers. Car maintenance is based on a cycle. Generally, the first maintenance time for a car is between 3 to 5 months, with the first maintenance mileage ranging from 3,000 to 5,000 kilometers, and even up to 8,000 kilometers for some cars. Below are the daily maintenance items for cars and their precautions: Maintenance and replacement of car fluids: Antifreeze, also known as coolant, primarily serves the functions of antifreeze and cooling. Cars are equipped with long-life antifreeze when they leave the factory, which can last up to 10 years or more than 100,000 kilometers. Under normal circumstances, it requires little maintenance unless sediments or flocculants are observed in the antifreeze. Car tire maintenance: Under-inflation or over-inflation of tires will lead to abnormal wear, shorten the tire's lifespan, increase fuel consumption, and even raise the risk of a blowout. It is recommended to check the tire pressure once a month to ensure normal tire pressure and the wear level of the tread pattern, and to rotate the tires as needed. Replacement of car consumable parts: The engine's spark plugs are consumable parts and should be replaced every 20,000 kilometers. In addition, components such as brake fluid, transmission oil, the battery, the throttle, the fuel injectors, and brake pads are all inspection items during routine maintenance, and should be serviced and maintained based on their condition.

19

0

Share

What does SP/GF-6 mean?

SP/GF-6 is an engine oil classification that represents key upgrades in wear resistance, low-speed pre-ignition prevention, deposit control, and other lubricant system-related performance aspects. It ensures enhanced fuel efficiency while providing comprehensive engine protection. SP/GF-6 oil delivers excellent driving performance, superior acceleration, outstanding compatibility with gasoline engine particulate filters, exceptional protection against low-speed pre-ignition, effective safeguarding for turbocharged direct-injection engines, and superior fuel economy. SP/GF-6 is an S-class oil, with oil grades typically categorized by viscosity classification and quality classification methods. Engine oils are classified according to SAE viscosity grades, with 6 types for winter use, 5 types for summer use, and 16 types for all-season use. The 6 winter oil grades are: 0W, 5W, 10W, 15W, 20W, and 25W. The "W" stands for Winter, and the smaller the preceding number, the greater the oil's fluidity and the lower its applicable temperature range. The 5 summer oil grades are: 20, 30, 40, 50, and 60. The larger the number, the higher the oil's viscosity and the better its high-temperature protection performance, making it suitable for higher temperature environments. The 16 all-season oil grades are: 5W20, 5W30, 5W40, 5W50, 10W20, 10W30, 10W40, 10W50, 15W30, 15W40, 15W50, 20W20, 20W30, 20W40, and 20W50.

15

3

Share

How to Repair the Non-Heating Issue of Wuling Zhiguang's Warm Air?

Methods to address the non-heating issue of Wuling Zhiguang's warm air: 1. Locate the car key below the steering wheel, turn the key to start the engine; 2. After the vehicle starts, turn the right knob of the air conditioning system clockwise to activate the system; 3. Once the air conditioning is on, press the AC button on the right knob of the air conditioning system to turn off the AC cooling function, which will then allow the warm air to heat up. The vehicle's warm air system can heat the air inside the cabin or the air drawn from outside, increasing the interior temperature. In terms of body dimensions, the vehicle measures 3797mm in length, 1510mm in width, 1820mm in height, with a wheelbase of 2500mm.

8

2

Share

How to Turn on the Warm Air in a Cruze?

Method to turn on the warm air in a Cruze: First, start the car and wait for the water temperature to rise. Then, rotate the temperature knob to the red zone (turn clockwise to increase temperature, counterclockwise to decrease). Adjust the fan speed knob and select the air outlet mode, typically choosing to blow air to both the face and feet simultaneously. To activate the warm air, start the engine for preheating. Once the engine temperature gauge reaches the middle position, turn on the heating system. Set the air circulation to external mode to expel cold air from the cabin. After 2 to 3 minutes, switch the air circulation to internal mode. In terms of body dimensions, the car measures 4666mm in length, 1807mm in width, 1460mm in height, with a wheelbase of 2700mm.

9

5

Share

What are the body dimensions of the new Hyundai ix35?

The length, width, and height of the new Hyundai ix35 are 4435mm, 1850mm, and 1680mm respectively, with a wheelbase of 2640mm. Below is an introduction to the Hyundai ix35: 1. The Hyundai ix35 is a compact SUV under the Hyundai brand, equipped with two engines: a 2.0-liter naturally aspirated engine and a 1.4-liter turbocharged engine. 2. The 1.4-liter turbocharged engine delivers 140 horsepower and a maximum torque of 242 Nm. This engine reaches its maximum power at 6000 rpm and its maximum torque between 1500 to 3200 rpm. It features direct fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with a 7-speed dual-clutch transmission. 3. The 2.0-liter naturally aspirated engine produces 160 horsepower and a maximum torque of 193 Nm, achieving its maximum power at 6500 rpm and maximum torque at 4800 rpm. It employs multi-point fuel injection technology and also uses an aluminum alloy cylinder head and block. This engine is matched with either a 6-speed manual transmission or a 6-speed automatic transmission. 4. The Hyundai ix35 uses a MacPherson independent suspension at the front and a multi-link independent suspension at the rear. 5. The Hyundai ix35 is available in both front-wheel drive and four-wheel drive versions, with the four-wheel drive models featuring an on-demand four-wheel drive system.

13

4

Share

What are the steps to replace wiper blades on a BMW?

Taking the BMW 3 Series as an example, the steps to replace the wiper blades are: 1. First remove the old wiper blade by pressing the buckle on it to release the fastener securing the wiper; 2. Then press the lower cover to remove it and take off the old wiper blade; 3. Open the cover of the new wiper blade, fit the wiper connector, press it firmly into place, and close the cover. Use the same method to install the new wiper blade on the passenger side. In terms of body dimensions, the BMW 3 Series has a length of 4719mm, width of 1827mm, height of 1459mm, and a wheelbase of 2851mm. The body type is a 4-door, 5-seat sedan, equipped with an 8-speed automatic transmission.

14

2

Share

How Often Should Semi-Synthetic Motor Oil Be Changed?

Is it necessary to service a car every 5,000 kilometers?

What does SP/GF-6 mean?

How to Repair the Non-Heating Issue of Wuling Zhiguang's Warm Air?

How to Turn on the Warm Air in a Cruze?

What are the body dimensions of the new Hyundai ix35?

What are the steps to replace wiper blades on a BMW?

Is the Golf available in black?

Will the washer fluid reservoir be damaged if the washer fluid freezes?

What to Do When the BMW 5 Series Air Conditioning Doesn't Heat Up?

What is the relationship between speed v and rotational speed n?