How often should new vehicle inspection stickers be obtained?

What Causes Unstable Idling in a New Car?

New car unstable idling reasons are as follows: Air filter: If the air filter is not replaced in time, it will cause insufficient air intake and reduce engine idle speed. Abnormal water temperature: High engine water temperature will cause early ignition timing, change the air-fuel mixture ratio, and thin the engine oil viscosity (poor lubrication). Causes of abnormal water temperature include: insufficient coolant, thermostat not opening, fan failure, and inaccurate temperature control switch. Excessive carbon buildup in throttle body and air flow meter: The throttle body and air flow meter are prone to dirt. Most modern cars use electronic throttle bodies, and even slight carbon buildup can affect them. Excessive carbon buildup in the throttle body can cause throttle sticking, severe power loss, and unstable idling. Clogged fuel injectors: Clogged fuel injectors will result in inconsistent fuel injection amounts, causing uneven cylinder operation and leading to unstable ignition and idling.

18

2

Share

How to Disassemble the LaCrosse Radiator?

Disassembling the LaCrosse radiator requires eight steps, as follows: 1. Remove the wiring harness clip inside the upper crossbeam of the radiator and move the wiring harness aside. 2. Remove the air filter assembly and move the control computer aside. 3. Remove the right headlight. 4. Remove the fan frame assembly. 5. Unscrew the drain bolt at the bottom of the radiator and collect the coolant. 6. Remove the upper and lower hoses. 7. Remove the radiator's mounting bolts. 8. Remove the radiator at a certain angle. The LaCrosse was introduced to replace the Regal and secure a significant position in the domestic mid-to-high-end car market. It integrates General Motors' globally synchronized advanced platform, superior resources from both domestic and international markets, and independent research and development. Equipped with cutting-edge leading powertrains and top-tier safety technology, it delivers an exhilarating driving experience. Luxurious features and meticulous craftsmanship provide an ultimate, comfortable, and opulent riding experience.

2

5

Share

What type of vehicle is the VV5?

VV5 is a compact SUV. Here are the relevant details about the VV5: 1. The dimensions of the VV5 are: length 4462mm, width 1857mm, height 1638mm, with a wheelbase of 2680mm, a fuel tank capacity of 55 liters, and a curb weight of 1579kg. 2. The WEY VV5 is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 171PS, a maximum power of 126kW, and a maximum torque of 287Nm, paired with a 7-speed dual-clutch transmission. 3. The VV5 is a model under the WEY brand. Other WEY models include: WEY VV7, WEY VV6, WEY VV7 GT, WEY P8, WEY VV7 New Energy, etc.

19

3

Share

How to reset the wrench light on Bestune X40?

Bestune X40 wrench light can be cleared by following these steps: 1. Turn off the ignition switch; 2. Press and hold both arrow buttons simultaneously, then turn on the ignition switch; 3. After approximately 3 seconds with the ignition on, release both arrow buttons; 4. The maintenance menu will appear on the display, asking whether to reset the maintenance reminder; 5. Press and hold the SET (reset) button for more than 3 seconds; 6. Press the MODE button; 7. Turn off the ignition switch and restart the vehicle to complete the maintenance light reset. Here is relevant information about the wrench light: 1. The wrench symbol on the dashboard is the vehicle's maintenance reminder light. If illuminated, it indicates that the vehicle requires maintenance. Regular maintenance can improve vehicle performance and extend its service life. 2. According to relevant vehicle maintenance test programs, proper maintenance can save 11.36% of fuel during driving; after complete maintenance, CO emissions during idle driving are reduced by 45.37%.

16

1

Share

Will tightening the valve stem press against the valve core?

Tightening the valve stem can press against the valve core, but the tire won't leak air even if the valve core cap is missing, because the valve stem is what actually functions. As long as the valve stem isn't damaged, there will be no air leakage. Types of valve stems: The Schrader valve (American-style) is the most widely used type of valve stem, commonly found in cars, motorcycles, bicycles, and other vehicles. The Presta valve (French-style) is typically used on bicycles, especially road bikes, along with other special types of valve stems. Functions of valve stems: The valve stem functions as a small component for inflating and deflating tires, maintaining the seal after inflation. A standard valve stem consists of three main parts: the valve stem body, the valve core, and the valve stem cap.

5

2

Share

Does Polishing Cause Color Difference?

Color difference cannot be resolved through polishing. Polishing only improves minor scratches in brightness and generally does not cause color difference issues. Automobile Scratch Repair: Car scratch wax can repair paint scratches, but it can only fix scratches that have not damaged the base coat (i.e., the color coat). For severe scratches, it won't work. The principle of scratch repair wax is to polish away the scratches. If it can be repaired, there won't be any noticeable color difference. If the gloss is slightly off, applying a brightening wax later can make it look the same as the original car paint. Automobile Color Difference Remediation Methods: If you notice the car paint color is incorrect after spraying, within one month of painting, it might be because the paint hasn't fully dried, resulting in a darker color. However, if the color difference remains obvious after a month, then the paint color is incorrect. In this case, you can ask the 4S shop to repaint it. During the spraying process, a gradient spraying technique can be used to make the car's color more similar, reducing the noticeable difference.

11

1

Share

How often should new vehicle inspection stickers be obtained?

What Causes Unstable Idling in a New Car?

How to Disassemble the LaCrosse Radiator?

What type of vehicle is the VV5?

How to reset the wrench light on Bestune X40?

Will tightening the valve stem press against the valve core?

Does Polishing Cause Color Difference?

What are the reasons why the trunk of the Audi Q2L cannot be locked?

What is the cloud point of base oil?

What is the steering wheel angle?

Where is Jetour Cars Produced?