How often should motorcycle gear oil be changed?

What does the ASR in Volkswagen Touran mean?

Definition of ASR: ASR stands for Anti-Slip Regulation (or Acceleration Slip Regulation). It is an active safety device in automobiles, also known as the Traction Control System. It prevents wheel slippage during acceleration, especially in high-powered vehicles, to maintain the stability of the vehicle's direction of travel. Function of ASR: Its primary purpose is to prevent the driving wheels from slipping during acceleration, particularly on special road surfaces with low friction such as rain, snow, hail, or ice. When the car accelerates, it controls the slip ratio within a certain range, thereby preventing rapid slipping of the driving wheels. Its functions are twofold: first, to improve traction, and second, to maintain the vehicle's driving stability. On slippery roads, a car without ASR is prone to wheel slippage during acceleration. Rear-wheel-drive vehicles may experience fishtailing, while front-wheel-drive vehicles may lose directional control. With ASR, the car either avoids or significantly reduces such phenomena during acceleration. During turns, if the driving wheels slip, the entire vehicle may drift to one side. With ASR, the vehicle follows the correct turning path. Most importantly, during turns, if the driving wheels slip, the entire vehicle may dangerously drift to one side, which is extremely hazardous on mountain roads. Vehicles equipped with ASR generally do not encounter this issue. Principle of ASR: When the driving wheels slip, ASR compares the rotational speeds of all wheels. The electronic system detects the slippage and immediately reduces the throttle intake, lowering the engine speed and thus reducing power output. It also applies braking to the slipping driving wheels. This ensures the most appropriate power output to minimize slippage and maintain tire grip on the road surface. Under ASR intervention, no matter how much throttle is applied, the system will output the optimal power for the conditions.

4

0

Share

Is the Prado gasoline or diesel?

Generally, if you emphasize power and fuel efficiency, choose diesel. Disadvantages of the diesel Prado: The domestic fuel quality is relatively poor, affecting engine lifespan. The fuel injection system of diesel engines is extremely precise and difficult to manufacture. Using low-quality fuel can severely shorten the lifespan of the injection system. Advantages of the gasoline Prado: Better highway performance and handling. More convenient refueling and cheaper fuel prices. Disadvantages of the gasoline Prado: Prone to aging and shorter lifespan. Although the gasoline Prado has better highway performance, it also causes the engine to wear out faster due to higher engine speeds and relatively higher combustion temperatures in the cylinders. Related components are more prone to aging, and parts wear out relatively quickly.

14

5

Share

Why does the low-pressure pipe of Honda CRV's air conditioner freeze?

The reasons for the freezing of the low-pressure pipe in a car's air conditioner include damage to the expansion valve, internal wear of the air conditioner compressor, and refrigerant leakage. Damage to the expansion valve: This prevents the formation of high pressure in the system before the expansion valve, and the high-pressure refrigerant cannot reach the pressure of 150Kpa, resulting in the evaporator behind the expansion valve failing to cool down, leading to ineffective air conditioning. Internal wear of the air conditioner compressor: This causes the pressure between the air conditioner compressor and the expansion valve to fail to reach 150Kpa to 200Kpa, preventing the refrigerant in the system from circulating normally and resulting in ineffective air conditioning. Refrigerant leakage: If there is too little refrigerant in the air conditioning system, the amount of refrigerant sprayed into the evaporator from the expansion valve will also decrease. Consequently, when the refrigerant evaporates in the evaporator, the amount of heat absorbed will decrease, leading to a reduction in cooling capacity.

4

5

Share

What Causes the Brake Pedal to Push Back Against the Foot?

When the brake pedal pushes back against the foot, it is because the ABS system is in operation. This is a normal phenomenon and not an indication of a car malfunction. Additional relevant information is as follows: 1. The ABS system is an anti-lock braking system, which prevents wheel lock-up during emergency braking. 2. During emergency braking, the ABS system allows the wheels to maintain a state of rolling and sliding, enabling the driver to decelerate the car while also controlling its trajectory, thus allowing the driver to steer around obstacles. 3. The ABS system monitors the speed of each wheel via wheel speed sensors. If a wheel is rotating too slowly and is about to lock up, the ABS system reduces the braking force applied to that wheel.

4

3

Share

How Often Should a Major Car Maintenance Be Performed?

A major car maintenance is typically performed every three years or 60,000 kilometers, while a minor maintenance is done every three months or half a year. Major maintenance is based on the existence of minor maintenance, and generally, these two types of maintenance are alternated. Here is more information about car maintenance: 1. Post-driving inspection and maintenance items: Check and replenish fuel and lubricants. Clean the interior, exterior, engine, and chassis of the vehicle. 2. First-level vehicle maintenance items: Clean the body and wipe the engine and chassis parts. Clean and maintain the air filter. Clean the fuel filter. 3. First-level vehicle lubrication maintenance items: Check the oil levels of the engine, transmission, rear axle, and steering gear, and add lubricants as required. 4. First-level vehicle inspection and tightening maintenance items: Check the steering gear, tie rods, and connecting rods for secure connections.

3

2

Share

What does 'plus' mean on a car?

Automobile 'Plus' refers to the Plus version of a car. The Plus version not only features a larger size, richer configurations, and more comprehensive services compared to other products but also has derived more meanings. In most cases, it can still be considered as a higher-tier version within a segmented category. More details are as follows: 1. The Plus version involves not just size but many other aspects that have been significantly improved. Simply put, the Plus version can be understood as an enhanced edition with increased size, length, width, and upgraded configurations. 2. 'P' stands for Popular, making the car's exterior design more trendy. 'L' stands for Large, upgrading not only the car's dimensions but also its functionality. 'U' stands for Utility, enriching the car's comfort configurations. 'S' stands for Smart, making the car's intelligent configurations more user-friendly. 3. Today, in the increasingly competitive automotive market, Plus version cars are preferred by more people. With upgrades in power and configurations, as well as profit compression, the application of the 'Plus' concept has brought another wave of opportunities for car manufacturers. It is evident that in this new landscape, various Plus models will become increasingly common.

5

3

Share

How often should motorcycle gear oil be changed?

What does the ASR in Volkswagen Touran mean?

Is the Prado gasoline or diesel?

Why does the low-pressure pipe of Honda CRV's air conditioner freeze?

What Causes the Brake Pedal to Push Back Against the Foot?

How Often Should a Major Car Maintenance Be Performed?

What does 'plus' mean on a car?

Why does the BMW driver's seat vibrate at low speeds?

What is the working principle of the Mercedes-Benz S600 active suspension?

What is the fuel tank capacity of the SWM X7?

Does the Odyssey have a rear anti-collision beam?