How often should Mercedes-Benz spark plugs be replaced?

1 Answers
StAmir
07/24/25 2:34pm
Mercedes-Benz spark plugs generally need to be replaced every 60,000 kilometers. Regular vehicle maintenance and condition checks are essential, and spark plugs should be replaced immediately if any issues are detected. Owners who frequently accelerate aggressively or drive at high speeds should pay extra attention to their spark plugs. More relevant information is as follows: 1. Spark plugs are a critical component of the engine. If they become wet or damaged, it can lead to engine misfires or even cylinder failure, potentially causing engine damage. 2. Although spark plugs typically require replacement at 60,000 kilometers, owners should still perform regular maintenance and inspections, especially those who drive aggressively or frequently floor the accelerator. Good spark plugs are essential for ensuring vehicle performance, and their replacement should not be delayed.
Was this review help?
16
4
Share
More Forum Discussions

Why is it not recommended to buy the GS8?

It is not recommended to buy the GS8 because there are many domestic mid-to-high-end brands, such as Lynk & Co and VV7, as well as mid-size SUVs like the BYD Tang, which are priced similarly to the GS8. Whether domestic or joint-venture, the GS8's price does not offer a competitive advantage. In terms of body size, the Highlander is 45mm longer than the GS8, making it appear more extended overall. However, the GS8 has a 10mm advantage in wheelbase and a 50mm advantage in height, giving it a taller and more imposing appearance. Consequently, the GS8's competitiveness in terms of price is weaker. Below is an introduction to the GS8's powertrain parameters: In terms of powertrain, the GS8 is equipped with a 2.0T turbocharged engine independently developed by GAC. This engine does not incorporate the currently popular direct injection technology, so in terms of parameters, it can only produce a maximum power of 148kW and a maximum torque of 320Nm.
8
1
Share

What documents are required for new car registration?

Documents required for new car registration include: ID card, vehicle certification, triplicate car purchase invoice issued by the 4S store, original and duplicate tax certificates obtained after paying the vehicle purchase tax, insurance policy, compulsory traffic insurance policy. For non-local residents, a temporary residence permit is also required. Relevant information about license plates is as follows: 1. Notes for new car registration: You need to go to the vehicle management office to complete the registration process. After submitting all required documents and paying the fees, the vehicle must be driven to the vehicle management office for inspection. Some exempt vehicles only require an external inspection, which generally involves checking the engine number and chassis number. After the inspection, you can proceed to the vehicle management office hall to select a license plate. 2. Function of license plates: License plates are used for numbering and information registration of vehicles. Their main purpose is to identify the region to which the vehicle belongs, and the owner and registration information of the vehicle can also be traced through the license plate.
4
3
Share

What are the symptoms of low manual transmission fluid?

When a manual transmission is low on fluid, the following symptoms may occur: 1. Driving vibration: Abnormal shaking while the vehicle is in motion. 2. Difficulty starting: The car struggles to move forward when accelerating from a stop. 3. Gear shifting issues: Difficulty engaging the correct gear or noticeable jerking during gear changes. 4. Transmission noise: Sounds caused by friction between transmission components. Additional information about transmission fluid: 1. Transmission fluid is the oil used in the transmission system. Its main functions are to lubricate the internal components, clean sludge and impurities, ensure proper operation, and extend the transmission's lifespan. 2. Transmission fluid is categorized into automatic transmission fluid (ATF) and manual transmission fluid (MTF). The replacement intervals vary depending on driving conditions. Generally, ATF should be changed every 80,000 or 120,000 kilometers, while MTF should be changed every 20,000 or 60,000 kilometers.
6
1
Share

Where is the USB port in the Sienna?

The USB port in the Sienna is located below the DVD disc slot. The USB interface is a type of vehicle transmission cable known for its fast transmission speed, ease of use, support for hot-swapping, flexible connectivity, and independent power supply. It is commonly used as a universal interface for devices such as USB flash drives and MP3 players. Below are some related details: 1. The USB port in a car is primarily used for transmitting audio data. The current output of car USB ports can vary, with some providing 5V/2.1A and others 5V/0.5A. 2. A car charger, also known as a vehicle charger, is a device that converts the 12V from the cigarette lighter into 5V USB power, suitable for charging mobile phones and tablets. There is also another type that converts the 12V DC from the cigarette lighter into 220V AC, which can be used with a power strip to power small electrical appliances.
19
0
Share

What are the corresponding speeds for each car gear?

1st gear is used for starting; 2nd gear corresponds to a speed of 5-20km/h; 3rd gear corresponds to 20-40km/h; 4th gear corresponds to 40-60km/h; 5th gear corresponds to 60-100km/h, or the maximum speed. Relevant information about manual transmission cars is as follows: 1. Introduction: A car that uses a manual shift mechanical transmission (also known as manual transmission, MT) to adjust speed. That is, the gear shift lever must be moved manually to change the gear meshing position inside the transmission, altering the gear ratio to achieve speed change. The gear shift lever can only be moved when the clutch is depressed. 2. Composition: By switching different gear sets, gear changes are achieved. As a key component in distributing power, the transmission must have two major parts: the power input shaft and output shaft, plus the gears that make up the transmission, which are the most basic components of a manual transmission.
13
2
Share

How to Resolve the P0650 Fault Code Displayed in a Car?

Clear the fault storage code. If it cannot be deleted, it might be caused by wiring issues. Check the instrument panel wiring and try again. Below is relevant information about the P0650 fault code: 1. Meaning: The P0650 fault code refers to the malfunction indicator lamp control circuit, also known as the engine light. It usually belongs to an intermittent fault light code, such as when the vehicle starts multiple times and then immediately stalls, or when the starter fails to start the engine within a very short time (less than one second). 2. Clearing Steps: Before clearing the P0650 fault code, the power should be turned on, but the engine should not be started. Then, wait for the computer to enter the initialization state. Before reading the code, visually inspect whether the connections of mechanical components related to the electronic control system are loose, leaking, or blocked, and check if there is any air leakage in the mass airflow sensor.
18
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.