How Often Should Malibu Tires Be Replaced?

1 Answers
LaneRose
07/25/25 3:55am
Malibu tires should be replaced every 60,000 to 100,000 kilometers, and frequently used tires are recommended to be replaced every 3 years. Tire replacement is primarily based on the following five situations: 1. Tires must be discontinued when worn to the wear limit indicator (i.e., tread depth below 1.6 millimeters). 2. Tire aging (confirmed by physical inspection). 3. Tires with deformed treads or damaged beads, tires with sidewall damage caused by driving under-inflated, and tires corroded by chemicals must not continue to be used. 4. Bulging tires must not continue to be used. 5. Any other damage that affects tire safety must also result in discontinuing use.
Was this review help?
1
3
Share
More Forum Discussions

What is the tire pressure for Audi Q5?

Audi Q5 tire pressure varies by season: 1. Summer tire pressure is 2.3 bar; 2. Winter tire pressure is 2.5 bar. Tire pressure refers to the air pressure inside the tire, and its level plays a significant role in the performance and power of the vehicle. Taking the 2018 Audi Q5 as an example, its body dimensions are: length 4629mm, width 1898mm, height 1655mm, wheelbase 2807mm, and fuel tank capacity 75L. The 2018 Audi Q5 is equipped with a 2.0T turbocharged engine, with a maximum power of 169kW and a maximum torque of 350Nm, paired with an 8-speed automatic transmission.
17
0
Share

How to Open the Fuel Tank Cap of a Lavida Car?

The method to open the fuel tank cap of a Lavida car is: after unlocking the vehicle, press the fuel tank cap for about 1 second to pop it open. The Lavida is a compact car. Taking the 2021 Lavida as an example, its body dimensions are: 4670 mm in length, 1806 mm in width, and 1474 mm in height, with a wheelbase of 2688 mm, a fuel tank capacity of 51 liters, and a trunk capacity of 510 liters. The 2021 Lavida is equipped with a 1.5-liter naturally aspirated engine, with a maximum torque of 145 Nm, a maximum torque speed of 3900 rpm, and a maximum power speed of 6000 rpm.
19
2
Share

What is the principle of engine cylinder braking?

Cylinder braking utilizes the compression resistance, internal friction, and intake/exhaust resistance generated during the engine's compression stroke to create a braking effect on the drive wheels. The following are relevant details about cylinder braking: 1. Cylinder braking refers to the momentary opening of the exhaust valve near the top dead center position of the piston during the compression stroke when the throttle is released, thereby releasing high-pressure gas. 2. After closing the exhaust valve, there is very little gas left in the cylinder. During the explosion (expansion) phase, when the piston moves downward from the top dead center, the cylinder enters a negative pressure state. 3. The gas resists the downward movement of the piston (the piston effectively creates a vacuum), generating torque in the opposite direction of the crankshaft, thus producing a braking effect.
20
5
Share

What are the models and specifications of automotive fuses?

Automotive fuse specifications and introduction are as follows: Specification introduction: Blade type: Mini blade fuse, small automotive fuse, medium automotive fuse, large automotive fuse, rated current from 1-40 amps to large size 30-120 amps, rated voltage 32 volts; Fork bolt type can be divided into: small fork bolt fuse, large fork bolt fuse. Rated current from 30-150 amps to 40-800 amps, rated voltage 32/125 volts. Precautions: The fuse should be replaced according to the rated current value indicated on the fuse box cover, do not use a fuse with a higher rated current. If the new fuse blows immediately, it indicates that there may be a fault in the circuit system, and it should be repaired as soon as possible.
15
2
Share

What brand of car is smart?

smart is the creative collaboration between Mercedes-Benz and the world-renowned watchmaker Swatch. The letter 'S' stands for Swatch, 'M' represents Mercedes, and 'art' signifies art. In English, 'Smart' conveys the meanings of agility and intelligence. Below are some relevant details about smart: 1. The smart fortwo is a microcar produced by smart. It features a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension. 2. In terms of dimensions, it measures 2695mm in length, 1663mm in width, and 1555mm in height, with a wheelbase of 1873mm. It is powered by a 0.9T turbocharged engine, paired with a 6-speed dual-clutch transmission.
14
2
Share

What are the functions of the front and rear oxygen sensors?

Front oxygen sensor and rear oxygen sensor have the following functions respectively: 1. The function of the front oxygen sensor is to detect the oxygen concentration in the engine exhaust gas and provide this information to the ECU in the form of an electrical signal. The ECU then performs closed-loop control of the fuel injection quantity based on the oxygen concentration information in the exhaust gas. When a high oxygen concentration is detected in the exhaust gas, it indicates that the engine mixture is too lean; when a low oxygen concentration is detected, it indicates that the engine mixture is too rich. The ECU will adjust the fuel injection quantity accordingly to achieve the optimal air-fuel ratio. 2. The rear oxygen sensor is mainly used to detect the oxygen concentration in the exhaust gas after purification by the three-way catalytic converter. If the data detected by the front and rear oxygen sensors are the same, it indicates that the three-way catalytic converter has failed.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.