How Often Should Engine Valve Seals Be Replaced?

1 Answers
PrestonLynn
07/30/25 1:11am
Engine valve seals do not have a fixed replacement interval, but it is recommended to replace them every 20,000 to 30,000 kilometers. Below is relevant information about engine valve seals: Function of engine valve seals: They prevent engine oil from entering the intake and exhaust pipes, avoiding oil loss. They also prevent the leakage of the air-fuel mixture and exhaust gases, and stop engine oil from entering the combustion chamber. Symptoms of damaged engine valve seals: If the valve seals are damaged, the vehicle may start burning oil, emitting blue smoke during cold starts. Additionally, the engine may exhibit symptoms such as poor acceleration and vibrations. In such cases, the valve seals need to be replaced, although there is no specific mileage requirement for replacement.
Was this review help?
2
0
Share
More Forum Discussions

What's the Difference Between Tire Pressure Warning and Tire Pressure Display?

Tire pressure display allows you to visually see the tire pressure, while tire pressure warning is just an alarm system that alerts you when the tire pressure is too high or too low. Abnormal tire pressure can occur due to the following reasons: Abnormal tire pressure: Generally, an alarm will sound if the pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the tire pressure monitoring system will still record the previous data, causing the tire pressure monitoring indicator to light up. In this case, simply reset the tire pressure. Damaged tire pressure sensor: The tire pressure sensor is used to monitor tire pressure and is installed directly inside the tire, connected to the tire inflation valve. If the tire pressure sensor is damaged during driving, it can also cause the tire pressure warning light to turn on. For sensor damage issues, only a brand-new replacement part can be used.
15
0
Share

What Causes the Car to Jerk When Braking?

It is normal for a car to jerk when braking hard, as this is the ABS system in action. If the car jerks when not braking hard, it may be due to uneven surfaces on the brake discs. Below is an introduction to ABS: 1. ABS stands for Anti-lock Braking System: ABS is installed to address the issue of wheel lock-up during braking. Its working principle involves a rapid cycle of braking and releasing, but ABS operates much faster than manual control. Cars equipped with ABS can effectively maintain wheel rotation without locking up, significantly improving vehicle stability during braking and braking performance on poor road conditions. 2. Origin: If the wheels lock up, the car may skid and lose control, making it impossible for the driver to steer or slow down the vehicle. Therefore, engineers developed the ABS to prevent wheel lock-up during emergency braking.
18
3
Share

What does pixel headlight mean?

Pixel headlights refer to headlights composed of multiple lighting units that can create image-like illumination effects to enhance driving safety and visibility. Most importantly, they aim to minimize glare for oncoming drivers and pedestrians while achieving clear and long-distance illumination. Introduction to automotive headlights: 1. Positioning: Automotive headlights, also known as car front lights or LED daytime running lights, serve as the "eyes" of a vehicle. They not only affect the owner's external image but are also crucial for safe driving at night or in adverse weather conditions. 2. Function: "Lights" and "horns" serve as communication mediums between vehicles. The "language of lights" in automotive headlights is primarily used during nighttime driving. Proper use of light signals can prevent accidents and serve as "reminders" or "warnings".
12
1
Share

What Causes the Clicking Noise When Turning the Steering Wheel in a Baojun Vehicle?

Here are the reasons for the clicking noise when turning the steering wheel in a Baojun vehicle: 1. From the perspective of steering gear mechanics: Many modern vehicles are equipped with vacuum power assistance, which only reduces the driver's steering effort but does not change the actual load on the steering gear itself. Therefore, the most effective way to minimize steering gear wear is to reduce the operational load on the steering gear. 2. Aging poses safety risks: Car owners should develop the habit of turning the steering wheel only after the wheels start rolling. This reduces friction between the tires and the road surface, thereby decreasing excessive load on the steering gear and minimizing wear on the steering linkage system. 3. Long-term stationary steering: This not only places significant stress on the steering gear but also accelerates tire surface wear and shortens tire lifespan. To change this habit, quickly turn the steering wheel as soon as the wheels begin to move slightly, achieving the desired steering control.
1
4
Share

Why Does a Car's Exhaust Pipe Emit Smoke?

There are several reasons why a car's exhaust pipe emits smoke: 1. White smoke: This may be due to wear in the engine cylinder's gasket, creating a gap that allows a large amount of coolant from the cooling system to enter the combustion chamber. Since water cannot burn, it turns into steam when heated and is expelled directly through the exhaust pipe. 2. Black smoke: In carburetor-equipped vehicles, the fuel injection amount is controlled by the throttle pedal. Excessive fuel entering the cylinder may not have enough time to burn completely before being expelled. 3. Blue smoke: This occurs when engine oil accidentally enters the combustion chamber, possibly due to scratches, poor piston sealing, or severe wear at the valve. The car's exhaust pipe plays a crucial role in reducing vibration and noise, extending the life of the exhaust muffler system. It contains a muffler inside, significantly lowering the vehicle's noise levels.
19
1
Share

How to Restore a Malfunctioning Lavida Remote Key?

To restore a malfunctioning Lavida remote key, it needs to be re-matched. Open the car door, and on the side of the driver's door, there is a small black button. Press it once, then press it three times consecutively. At this point, the hazard lights on the dashboard will flash once. Insert the key, and the hazard lights will flash again. Pull out the key and lock the car to complete the matching process. The Lavida is a compact car under SAIC Volkswagen, with dimensions of 4670mm in length, 1806mm in width, and 1474mm in height, and a wheelbase of 2688mm. In terms of suspension, the front suspension of this car uses a MacPherson strut independent suspension, while the rear suspension employs a torsion beam non-independent suspension.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.