How often should drivers submit a physical condition certificate?

1 Answers
DiAsher
07/29/25 10:55pm
Submit once a year. Drivers over 70 years old must undergo a physical examination annually and submit a physical condition certificate to the vehicle management office within 30 days after the end of the scoring cycle. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses": Article 72: Motor vehicle drivers aged 70 or older shall undergo a physical examination once a year and submit a certificate of physical condition issued by a medical institution at or above the county level or the regimental level of the armed forces within thirty days after the end of the scoring cycle. Article 73: If a motor vehicle driver is unable to complete the renewal of the driver's license upon expiration, inspection, or submission of a physical condition certificate within the specified time due to reasons such as military service or going abroad (border), they may apply to the vehicle management office of the place where the motor vehicle driver's license was issued for an extension.
Was this review help?
3
2
Share
More Forum Discussions

Where is the trunk release cable of the Ford EcoSport located?

The trunk release cable of the Ford EcoSport is located under the trunk. Below is some relevant information about the Ford EcoSport: 1. Introduction to the Ford EcoSport: The EcoSport, the first compact SUV under Changan Ford, was officially launched on March 19, 2013, with a total of 6 models released. 2. Engine specifications: The Ford EcoSport is equipped with either a 1.0-liter GTDi direct-injection turbocharged engine or a 1.5-liter twin independent variable camshaft timing engine. The 1.5T engine is a four-cylinder, while the 1.0T is a three-cylinder. 3. Interior features: The Ford EcoSport's interior is adorned with orange trim panels for a lively visual effect, and it offers up to 27 flexible and practical storage spaces to meet daily needs.
9
5
Share

Why Don't Foreign Cars Get Lengthened?

Lengthening foreign cars would increase driving difficulty, pose safety risks, and reflect different vehicle usage concepts between domestic and foreign markets. Below are relevant introductions about car modifications: 1. Laws and Regulations: According to Article 16, Item 1 of the Road Traffic Safety Law of the People's Republic of China, no organization or individual may assemble motor vehicles or alter the registered structure, construction, or characteristics of motor vehicles without authorization. 2. Penalty Conditions: If an exaggerated large rear wing is installed without proper registration with vehicle management authorities, once discovered by traffic police, penalties including point deduction (typically 2 points) and fines will be imposed. For illegally modified vehicles, public security traffic management departments will not issue safety inspection qualification marks. Such acts constitute public security management violations, and public security authorities will impose penalties such as fines or detention in accordance with relevant provisions of the Public Security Administration Punishment Law.
20
3
Share

How to Adjust Hydraulic Power Steering to be Lighter?

Methods to adjust hydraulic power steering to be lighter: You can replace the power steering fluid with new one, which will make the steering wheel feel lighter. If it still feels heavy, it is recommended to check the tire pressure of the front wheels. Low tire pressure in the front wheels can also cause the steering wheel to feel heavy. However, do not inflate the front tires with excessively high pressure just to make the steering lighter, as this will reduce the contact area between the front tires and the ground, affecting the vehicle's handling and driving stability. There are two types of hydraulic power steering systems in cars: one is the mechanical hydraulic power steering system, and the other is the electro-hydraulic power steering system. Both of these hydraulic power steering systems have a power steering pump. The power steering pump in the mechanical hydraulic power steering system is driven by the engine, while the power steering pump in the electro-hydraulic power steering system is driven by an electric motor.
1
1
Share

How to Clean Carbon Deposits in the Engine?

Methods for cleaning carbon deposits in the engine: 1. Connect a carbon deposit cleaner to the engine's fuel injector, using the cleaner to soften the carbon deposits inside the engine so they can be burned and expelled; 2. Disassemble the engine's intake manifold for cleaning, then scrape off stubborn carbon deposits, and reassemble the engine after cleaning; 3. Drive more on long trips or highways, as the vehicle in a warmed-up state hardly produces carbon deposit buildup, and the high-speed operation of the engine can expel some carbon deposits. Carbon deposits are a coking-like substance produced during the engine's operation from unsaturated olefins and gums in the fuel under high temperatures. They have oil-absorbing properties, causing incompletely burned gasoline to turn into more carbon deposits. Carbon deposits reduce engine power, increase fuel consumption, and in severe cases, can cause engine knocking, acceleration noises, and other issues. They can also damage pistons and crankshafts, potentially leading to engine oil burning and requiring major repairs.
20
4
Share

How to Replace the Battery in a Mercedes-Benz S430-4MATIC Key?

The method to replace the battery in a Mercedes-Benz S430-4MATIC key: 1. Flip open the switch at the back end of the key and remove the mechanical key; 2. Insert the mechanical key into the slot at the switch position and apply slight force to pop open the back cover; 3. Remove the depleted old battery, replace it with a new one, and close the back cover to complete the battery replacement. During the replacement process, pay attention to the battery model. Most Mercedes-Benz key batteries use the 3V CR2025 model. The Mercedes-Benz S430-4MATIC measures 5159mm in length, 1857mm in width, and 1445mm in height, with a wheelbase of 3086mm. It features a 4-door, 5-seat sedan body structure and is powered by a 4.3L naturally aspirated V8 engine, delivering a maximum power of 205kW and a maximum torque of 295Nm.
10
2
Share

What is the instruction for using the gear positions of the Prado?

Toyota Prado detailed gear position instructions are as follows: 1. P (Parking gear): The parking gear is usually used for long-term parking, and the vehicle should be stationary when shifting into the parking gear. 2. R (Reverse gear): Can only be engaged when the car is completely stopped. 3. N (Neutral gear): The neutral gear is located after the reverse gear. When shifted into neutral, the engine power cannot be transmitted to the wheels, and it is generally used for short-term parking. 4. D (Drive gear): All forward gears can automatically shift up and down, with the shifting timing depending on engine load, personal driving style, and driving speed. 5. S (Sport gear): In sport mode, the engine speed is kept higher to achieve better power performance, and the transmission shifting logic becomes more aggressive. 6. L (Low gear): The low gear is one of the forward gears and can be used during long downhill or steep downhill driving, but care should be taken not to let the engine speed get too high.
18
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.