How Often Should Carbon Deposits Be Cleaned in a New Car?

1 Answers
DeArthur
07/29/25 11:11pm
Generally, a new car requires carbon deposit cleaning every 20,000 to 30,000 kilometers. If the car is frequently driven on highways, this interval can be extended to 30,000 to 50,000 kilometers. Car owners can decide based on their driving conditions. If the carbon deposits in the engine are not severe, there is no need for specialized cleaning. However, if the carbon deposits are significant, it is advisable to clean them every 30,000 to 50,000 kilometers. Areas prone to carbon deposits include the engine combustion chamber, intake ports, valves, and throttle body. Carbon deposits have a considerable impact on the engine. If they accumulate in the combustion chamber, they can increase the compression ratio, leading to engine knocking. Knocking is an abnormal combustion condition that affects engine power output and fuel efficiency. It typically occurs during the compression stroke when both the intake and exhaust valves are closed, and the piston moves upward. Methods for cleaning carbon deposits include using gasoline additives, specialized cleaning agents, or disassembling the engine. Using gasoline additives, commonly known as fuel system cleaners, is the most feasible and practical method. Disassembling the engine is usually reserved for cars that have traveled 200,000 to 300,000 kilometers with little or no carbon deposit cleaning and noticeable engine performance degradation. For a new car, it is recommended to use a full course of fuel system cleaner around 20,000 kilometers. A full course typically consists of about 300ml of cleaner. Some products come in five 60ml bottles, while others are in a single container, with 1/5 added each time the tank is filled. Completing a full course requires about five refuels, covering approximately 3,000 kilometers. Since carbon deposits are not severe at this stage, the effects may not be immediately noticeable.
Was this review help?
13
0
Share
More Forum Discussions

What are the methods for treating scratches on a white car?

White car scratch treatment methods are: 1. Choose scratch repair wax, use a waxing sponge to polish the scratch area, then apply gloss restoration wax or brightening wax; 2. Evenly apply toothpaste on a cloth and wipe the scratch area; 3. Use water sandpaper dipped in water to remove rust spots, then use a touch-up pen for coloring; 4. Clean the scratched area, polish it, and then spray paint; 5. Apply scratch removal wax; 6. Perform car polishing. Car polishing refers to using specialized polishing tools and grinding media to repair defects in the car's paint surface, grinding the clear coat layer of the paint to level the high and low areas around scratches or scuffs, maintaining a bright and glossy paint finish.
20
0
Share

What is the starting method for novice drivers with automatic transmission?

The starting method for novice drivers with automatic transmission is: 1. Insert the key into the ignition, turn it to the second power position, and wait for the system self-check to complete; 2. Shift the gear lever from P to N; 3. Release the brake and start the car's engine; 4. Press the brake pedal with your foot, shift the gear lever from N to D, release the brake, and press the accelerator to start. Precautions for driving an automatic transmission car include: 1. Start gently by pressing the accelerator, engage P or N gear when starting, and avoid coasting in neutral; 2. Shift back to N gear when waiting at traffic lights or briefly stopping, and engage P gear when parking; 3. Do not shift into P gear while driving; 4. Ensure the vehicle is completely stopped before shifting into R gear for reversing.
15
4
Share

What are the symptoms of a faulty EGR valve in a diesel engine?

Diesel engine EGR valve is the exhaust gas recirculation system valve. The following are the symptoms when the EGR valve fails: 1. Symptoms of a faulty EGR valve include extremely unstable idle or even stalling, flashing malfunction indicator light, failure to meet annual emission inspection standards, burning engine oil, and blue smoke from the exhaust. 2. When the EGR valve remains open, the car may exhibit black smoke, poor acceleration, and increased fuel consumption. Extended content: The EGR valve, also known as the exhaust gas recirculation valve, is a mechatronic product installed on diesel engines to control the amount of exhaust gas recirculated into the intake system. It is a very important and critical component in the exhaust gas recirculation device. Its function is to control the amount of exhaust gas entering the intake manifold, allowing a certain amount of exhaust gas to flow into the intake manifold for recirculation.
6
5
Share

Should Your Foot Always Rest on the Brake During Subject Two Test?

During the Subject Two test, you can keep your foot on the brake pedal at all times, ready to apply the brakes when necessary. Here is some relevant information: Definition: Braking, also known as deceleration, refers to the action of stopping or reducing the speed of a moving locomotive, vehicle, or other transportation tools or machinery. The general principle of braking is to fix a wheel or disc on the high-speed shaft of the machine and install corresponding brake shoes, bands, or discs on the machine base, which generate braking torque under external force. The braking device, also known as a decelerator, is a mechanical device that can slow down the vehicle speed. Classification: Braking can be divided into emergency braking and daily braking. During emergency braking, be aware of the potential hazard of rear-end collisions from following vehicles.
19
4
Share

What does car tone mean?

Car tone refers to the sound settings, which can adjust bass, midrange, and treble for music genres like rock, jazz, symphony, and pop. Extended car button functions: 1. Autohold is the automatic parking function button; 2. OK and SEL keys are menu selection confirmation buttons, located on the multifunction steering wheel; 3. AC button is the compressor switch, i.e., the air conditioning cooling switch; 4. VOL is the button for adjusting volume up and down; 5. MUTE is the mute button; 6. MODE is the mode switching button; 7. SET on the multifunction steering wheel is the cruise control function button; 8. INFO is the information display function key.
20
2
Share

What is the minimum ground clearance of the new Highlander?

The minimum ground clearance of the new Highlander is 195mm when fully loaded and 205mm when unloaded. Ground clearance, also known as ride height, refers to the distance between the lowest protruding part of the vehicle's chassis and the level ground when the car is parked on a flat surface under rated full load. Here is some relevant information about minimum ground clearance: 1. The greater the minimum ground clearance, the stronger the vehicle's ability to pass over obstacles or uneven terrain, but the higher the center of gravity, which reduces stability. 2. The smaller the minimum ground clearance, the weaker the vehicle's ability to pass over obstacles or uneven terrain, but the lower the center of gravity, which can increase stability.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.