How often should an Audi A4L be serviced under normal conditions?

1 Answers
StJulian
07/29/25 8:35pm
Audi A4L's maintenance cycle is to perform a routine service every 10,000 kilometers or 12 months (whichever comes first). Audi provides the first free service for new cars after driving 10,000 kilometers. Here are the relevant details: 1. Routine maintenance items mainly include the replacement of engine oil and oil filter, air filter, fuel filter, and pollen filter, replacement of spark plugs, and related system inspections and maintenance such as transmission oil. 2. The replacement cycle for engine oil and oil filter is every 10,000 kilometers, the air conditioning filter should be replaced every 30,000 kilometers, the air filter should be replaced every 40,000 kilometers, and the spark plugs should be replaced every 20,000 kilometers. 3. The maintenance cycle should be determined based on driving conditions. If used under harsh conditions, it is necessary to increase maintenance items and frequency and shorten the engine oil replacement cycle. However, in practice, 4S shops may require maintenance every 5,000 to 7,500 kilometers, which is more conducive to the car's service life and driving safety.
Was this review help?
8
1
Share
More Forum Discussions

How many kilometers can a car travel when the fuel gauge light comes on?

When the car's fuel gauge light comes on, it can still travel 40-60 kilometers. Here is a detailed introduction about the car fuel gauge: 1. After filling up the tank, the fuel tank float rises, causing the contacts and sliding piece of the fuel level sensor to not reach the edge position or even disconnect. This increases the resistance, simulating a low fuel situation, and the fuel warning light will activate and stay on. 2. A malfunction in the fuel level sensor can cause the fuel gauge indicator light to stay on constantly. The fuel level sensor detects the position (height) of fuel in the container by measuring the change in capacitance between the sensor shell and the sensing electrode when fuel enters the container, converting this change into a current variation. 3. Circuit failure. When there is a short circuit or open circuit in the wiring, the system cannot read the information from the fuel level sensor, resulting in the indicator light staying on constantly.
5
4
Share

Is It Still Possible to Buy Discontinued Cars?

Discontinued cars can still be purchased in the used car market. Here are some important considerations when buying a used car: 1. Pay attention to used car policies: Currently, the used car market is predominantly filled with vehicles meeting the China IV emission standard. While the government has lifted restrictions on the transfer of used cars in most regions, some areas still impose limitations on the transfer or registration of used cars that fall below the current emission standards. It is essential to be aware of the used car policies in your region and the emission standard of the used car you intend to purchase. 2. Ensure the completeness of the used car's documentation: The documentation of a used car also affects its transfer process. Generally, you will need the vehicle registration certificate, proof of purchase tax payment, purchase invoice, and vehicle license to complete the transfer procedures. 3. Complete the transfer procedures promptly: Buying a used car does not mean you fully own the vehicle just by paying for it. Signing the sales contract and making the payment only grants you the right to use the vehicle, while the registered ownership remains with the previous owner. It is crucial to complete the transfer procedures promptly by updating the registered owner with the local vehicle management office to fully own the car.
19
3
Share

What to Do When the Cigarette Lighter Fails to Pop Out Normally?

If it's not heating up (turning red) but simply won't pop out, the issue is likely a blown fuse, meaning the cigarette lighter isn't receiving power, which prevents it from popping out normally. You can replace the cigarette lighter fuse yourself by following these steps: 1. Locate the fuse box for the car's electrical components—it may be inside the glove box or under the dashboard, depending on the vehicle model. 2. Open the fuse box cover and refer to the fuse location diagram on the inside of the cover to find the position of the cigarette lighter fuse. 3. Use the provided fuse puller to remove the blown fuse and replace it with a new or spare cigarette lighter fuse. Below is a detailed introduction to the cigarette lighter: The cigarette lighter operates at a voltage of 12 volts, matching the vehicle's battery voltage. Typically, the cigarette lighter has its own dedicated power line, separate from other circuits, hence it has its own dedicated fuse. The correct method of use is to insert and remove it vertically without shaking it, as frequent wiggling during removal can lead to loosening, short circuits, and damage to the fuse or external devices.
6
0
Share

How to Pull Out a Dent in Car Body Panels?

To pull out dents in car body panels, you can mainly use hot melt glue to attach a bottle cap to the center of the dent and then screw on a bottle to pull the dent outward forcefully. Below is a detailed introduction on how to pull out dents in car body panels: 1. Dents not on the waistline or creases: If the dent is not on the waistline or a crease, you can use hot melt glue to attach a bottle cap to the center of the dent and then screw on a bottle to pull the dent outward. Alternatively, you can purchase "car dent repair tools" on Taobao, which usually come with tutorials and are quite simple and effective. 2. Dents on the waistline or creases: If the dent is on the waistline or a crease, it is recommended to go to a 4S shop or auto repair shop for metal sheet repair. If the dent is on the front or rear bumper, which is usually made of plastic, the repair is relatively easier. Pour hot water over the dented area of the bumper to heat it up until it softens to a certain extent. Then, while it's still hot, push the dent outward from inside the engine compartment until the dent is restored.
20
1
Share

Why is the tire pressure monitoring not displaying in the New Bora?

New Bora's tire pressure monitoring not displaying reasons are detailed as follows: Transmitter failure: If there is no static response and it cannot be paired, then the transmitter has failed. It could also be caused by low signal transmission strength, which can usually be resolved by changing the placement position. Tire pressure sensor installation issue: If the tire pressure of one tire is not displaying, first confirm whether the tire pressure sensor of that wheel is installed correctly. Remove the tire and reinstall it, then try again. If it still doesn't display, you can swap the normal sensor to this wheel. Tire pressure display module malfunction: If it still doesn't display, it indicates a fault in the tire pressure display module. If it displays normally, it means that particular sensor is damaged. The solution is to replace the relevant components with new ones or install a new set of tire pressure monitoring products.
11
5
Share

What is the function of the front oxygen sensor?

The function of the front oxygen sensor is to detect the oxygen content in the exhaust gas produced after the combustion of the cylinder's air-fuel mixture. Below is a detailed introduction to the consequences of a faulty front oxygen sensor: 1. When the front oxygen sensor fails, the ECU cannot obtain information about the oxygen concentration in the exhaust pipe, thus it cannot provide feedback control for the mixture's concentration. This leads to increased fuel consumption and exhaust pollution, and the engine may experience unstable idling, misfires, surging, and other fault phenomena. 2. The automotive oxygen sensor is used to detect the state of the exhaust gas entering the three-way catalytic converter, making it an essential sensor for engines equipped with this device. Once the engine's air-fuel ratio deviates from the theoretical air-fuel ratio, the three-way catalyst's ability to purify CO, HC, and NOx will sharply decline. Therefore, to achieve the optimal exhaust purification performance for engines equipped with a three-way catalytic converter, the air-fuel ratio of the mixture must be controlled within a very narrow range around the theoretical air-fuel ratio. Currently, there are two types of oxygen sensors used in automobiles: zirconia and titanium oxide.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.