How Often Should a Volkswagen Vehicle Have Its First Maintenance?

1 Answers
VanVivian
07/29/25 12:16pm
Volkswagen vehicles require their first maintenance at 5,000 kilometers or 6 months, whichever comes first. The first maintenance includes: 1. Changing the engine oil and oil filter; 2. Cleaning the air filter; 3. Checking the levels of various fluids to ensure they are normal; 4. Inspecting the generator belt; 5. Checking the wiper blades for any damage; 6. Verifying the tire pressure is correct. Taking the Volkswagen Lavida 2021 model as an example, its body dimensions are: length 4670mm, width 1806mm, height 1474mm, with a wheelbase of 2688mm, a fuel tank capacity of 51 liters, and a trunk capacity of 510 liters. The Volkswagen Lavida 2021 is equipped with a 1.4T turbocharged engine, delivering a maximum power of 110kW and a maximum torque of 250Nm.
Was this review help?
12
1
Share
More Forum Discussions

How to Identify Vehicle Tire Models?

Vehicle tire models can generally be found on the sidewall of the tire. For example, 225/50R1798H, where 225 represents the tread width in millimeters; 50 is the aspect ratio, indicating 50%, with most household car tires having an aspect ratio between 30% and 80%. Under normal conditions, the aspect ratio of ordinary car tires is generally greater than 75%; R indicates the tire has a radial structure, 17 is the rim diameter in inches; 98 refers to the load index, with each tire supporting 750kg. H represents the speed rating, with a maximum speed of 210km/h. In addition to the model, tires also display the following common data: Tire cord material: Indicated by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters A to Z represent certified speed ratings from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: Indicates the rim size compatible with the tire for practical use, such as 'Standard Rim 5.00F'.
1
2
Share

Can You Drive a Manual Transmission Car After Learning Automatic Transmission?

Learning automatic transmission does not qualify you to drive a manual transmission car. The permitted vehicle types for a small automatic transmission vehicle license (C2) do not include C1 (small vehicles, which cover both automatic and manual transmissions). Here are the introductions to automatic and manual transmissions: 1. Automatic transmission car: An automatic transmission car does not require the driver to manually shift gears. The vehicle automatically selects the appropriate gear based on the driving speed and traffic conditions. 2. Manual transmission car: A manual transmission car uses a manual shift mechanical transmission (also known as manual gearbox, MT) to adjust the vehicle speed.
7
0
Share

How to use the cruise control buttons on the new Sagitar?

The cruise control buttons on the new Sagitar are used as follows: 1. CNL is used to cancel cruise control, RES is used to resume cruise, and 0/1 is used to turn off cruise control. 2. The SET button is the setting button, press it to adjust the desired speed. (Note: The cruise control function can only be used when the speed is above 30km/h) 3. The button to control the cruise control speed is the silver button on the left side of the steering wheel, move it to the left to decelerate and to the right to accelerate. 4. Driving assistance systems: lane keeping assist, blind spot assist, parking assist, front assist system, etc.
2
5
Share

How to Handle the Dashboard Display of Vehicle Condition Check in Passat?

When the Passat dashboard displays a vehicle condition check, it indicates that the vehicle requires maintenance. It is best to visit a 4S shop and use a specialized diagnostic computer to reset the maintenance code to 0 in order to clear this display. The manual method to clear the display is as follows: 1. Turn off the ignition. 2. Press and hold the 0.0 button at the bottom right corner with your left hand. 3. Turn on the ignition with your right hand (note: do not release the left hand). 4. At this point, a non-flashing wrench symbol will appear on the dashboard. 5. Release the left hand. 6. Press the button at the bottom left corner once. 7. The wrench symbol will disappear.
19
5
Share

How to Replace the Battery in a Volkswagen Lavida Car Key?

Replacing the battery involves the following steps: 1. Prepare the necessary tools for battery replacement: a flat-head screwdriver, the car key, and the battery. 2. Locate the round button on the side of the car key. Press the round button with one hand while pulling out the mechanical key with the other hand. 3. Hold the key with one hand and the flat-head screwdriver with the other. Find the gap in the middle of the key's top end and insert the flat-head screwdriver into it. Pry the key up and down until a gap is created. 4. Remove the key circuit board, gently push one side of the battery with your finger, and take out the old battery. Place the new battery with the positive side facing up into the battery slot on the key, and gently push it until it is fully secured. 5. Cover the key circuit board back onto the key, align the two separated halves of the key properly, and press both sides of the key with your hands until the upper and lower parts are completely fitted together. Finally, insert the mechanical key back into the key slot.
17
0
Share

How to turn on the high beam on the Sylphy?

The method to turn on the high beam on the Sylphy is as follows: 1. Turn the end of the light control lever forward to the first position—position lights. 2. Turn the end of the light control lever forward to the second position—low beam. 3. In the low beam state, gently push the light control lever forward—switch to high beam (when kept on for a long time, the high beam indicator will appear on the dashboard until switched back to low beam); pull it back—return to low beam. Here is the difference between high beam and low beam: 1. High beam has a higher angle and longer distance, while low beam has a lower angle and shorter distance. 2. You can use high beam when driving on highways or in rural areas without streetlights to expand the field of vision. In urban areas, it is recommended to use low beam.
3
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.