How often should a vehicle be started if left unused for a long time?

1 Answers
AddysonAnn
07/29/25 4:18pm
If a vehicle is left unused for a long time, it should be started once a week to ensure the proper functioning of various fluids in the engine and the car battery. If the car is not started for an extended period, the engine oil will stop circulating, affecting the normal operation of the engine after startup and potentially causing the car battery to lose charge. Precautions for leaving a car unused for a long time: 1. Always park the vehicle on a flat surface to prevent tire wear due to compression or malfunction of internal fluids caused by imbalance; 2. After starting the car, it is advisable to warm it up for about 10 minutes to allow all engine components to be fully lubricated and function properly.
Was this review help?
16
3
Share
More Forum Discussions

What are the steps to disassemble the dashboard of a Buick Excelle?

The center console has one or a ring of imitation metal or wood trim strips, all of which are clipped in place. You can use a tool similar to a flat-head screwdriver to gently pry along the seams. Then, you need to use a pry tool to remove the air vents on the center console. Finally, remove the air vents of the Nissan Sylphy Classic, and the entire center console will be completely disassembled.
10
5
Share

Why did the sunroof of my Volkswagen suddenly stop closing?

The sunroof will stop when it is close to the fully open position. Press and release the control button again to fully open the sunroof. Press and release to close the sunroof shade. The sunroof shade will stop when it is halfway closed. Press and release to close the tilted or open sunroof. If the anti-pinch sunroof or sunroof shade encounters an obstacle while closing, it will retract a certain distance.
20
1
Share

How to Repair a Cracked Headlight Cover?

First, use masking tape to cover the surrounding areas of the headlight cover to prevent damage to the paint during sanding and polishing. It's best to use wider masking tape. Then, slowly sand away the cracks on the headlight cover using sandpaper. Start with 240-grit sandpaper for coarse sanding, then switch to 400-grit or 600-grit for fine sanding. After completely removing the cracks, finally use a polishing machine and polishing wax to polish the surface.
5
2
Share

What Causes Engine Stalling After Ignition?

The causes of engine stalling after ignition include carbon buildup or fuel system malfunctions. Below are detailed reasons and solutions: Reasons for stalling after ignition: 1. Carbon buildup: During cold starts, the engine temperature is low, and fuel is less volatile and harder to vaporize. If there is severe carbon buildup in the fuel lines or intake passages, these deposits will absorb fuel vapors, leading to an overly lean air-fuel mixture in the combustion chamber. This can cause unstable idling or immediate stalling after ignition. After several ignition attempts, the carbon deposits become saturated with fuel vapors, allowing the air-fuel mixture to normalize and the engine to start. 2. Fuel system issues: (1) A faulty fuel pump may suddenly seize or malfunction, causing insufficient fuel supply and stalling. (2) Low fuel system pressure due to a weak fuel pump, fuel leaks, low electrical current, or a damaged fuel pressure regulator can result in inadequate fuel delivery. (3) Clogged or leaking fuel injectors can cause poor fuel atomization, leading to insufficient fuel supply and stalling. Solutions for stalling after ignition: 1. Firmly grip the steering wheel with your left hand to maintain control. 2. Press the brake pedal hard with your right foot to reduce speed as much as possible, then quickly shift the AT transmission to N (Neutral). 3. Turn the key back one position, restart the engine, and shift back to D (Drive) to resume normal operation.
1
2
Share

How to Turn Off the Auto Start-Stop Function in Volkswagen Passat?

The switch button is located on the left side of the gear lever. The auto start-stop button is marked with an "A" character. After the auto start-stop function is turned off, a corresponding indicator light will illuminate on the dashboard. Pressing the button when it is off will turn the auto start-stop function back on. When the engine is off, turning the steering wheel can activate the engine. When parking, pressing the brake pedal firmly can automatically shut off the engine.
17
0
Share

How to Use the Extension Line for Steering When Reversing into a Parking Space?

First, pull the car to an appropriate position, shift into reverse gear, release the clutch, and maintain a slow speed while observing from the driver's perspective. When the corner of the parking space appears in the right rearview mirror, pay attention to the distance between the rear wheel and the corner of the space. Look at the left rearview mirror, and when the horizontal yellow line crosses the lower edge of the left rearview mirror and is completely obscured, press the brake and clutch.
7
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.