How Often Should a Van Have Its Oil Changed?

1 Answers
RicardoFitz
07/25/25 3:26pm
Generally, the oil should be changed once the recommended mileage is reached. For some high-end vehicles, an oil change reminder will appear when the mileage is due. Typically, the break-in period for a new car is 2,500 to 3,000 kilometers, while the standard interval is 5,000 kilometers, depending on driving habits and oil grade. The importance of oil changes. Engine oil is as vital to an engine as blood is to the heart. Engine oil contains various additives that effectively protect the engine's critical moving parts, ensuring smooth operation. Oil change intervals. When purchasing a car, the manufacturer provides a maintenance manual that specifies the recommended oil change mileage and intervals, which for most vehicles range between 5,000 to 10,000 kilometers. The oil change interval for a car is typically between 5,000 to 10,000 kilometers or every six months to a year. Introduction to engine oil: 1. Engine oil, also known as motor lubricant, serves to lubricate the engine, reduce friction, assist in cooling, and prevent rust and corrosion, often metaphorically referred to as the 'blood' of a car; 2. Engine oil generally consists of two components: base oil and additives. The base oil is the primary constituent, determining the fundamental properties of the lubricant, while additives enhance and compensate for any performance shortcomings of the base oil.
Was this review help?
18
4
Share
More Forum Discussions

How many kilometers should the timing belt of the new Octavia be replaced?

The timing belt of the Octavia generally needs to be replaced every 60,000 to 80,000 kilometers. If the mileage hasn't been reached, it should still be inspected if it's been over 5 years. Signs that the timing belt needs replacement: The car experiences unstable idling and is prone to stalling, mainly characterized by poor acceleration and lack of power during acceleration. In severe cases, the engine may shake. When these symptoms appear, and faults in components like the throttle are ruled out, the timing belt should be considered as the issue. Visually, any cracks on the belt indicate it's time for a replacement. Consequences of a broken timing belt: A broken timing belt will cause the valves to open and close at the wrong time, and the pistons to move up and down out of sync. This misalignment can lead to the valves and pistons colliding, resulting in damage to both and rendering the engine inoperable. In severe cases, a major engine overhaul may be required. Necessity of timing belt replacement: The timing belt is responsible for the precise coordination of key engine components, making it crucial for the engine's proper operation. If the timing belt fails, the valves and ignition system may stop working or become erratic, causing the engine to cease functioning. In severe cases, the cylinder head may also be damaged. If this happens, a major engine overhaul is necessary.
14
4
Share

Symptoms of Loose Tire Bolts?

Symptoms include hearing a clicking sound while driving, and in severe cases, the tire may wobble during driving, causing the car to deviate from its path. Precautions for tire replacement are as follows: 1. Check the tire's expiration date: Generally, tires should not be stored for more than 3 years from the production date, and should not be used for more than 8 years after installation. 2. Observe the tire tread and color: Old tires are severely worn, and inferior retreaded tires are not processed properly, resulting in shallower treads. Retreaded tires often have overly vibrant colors. 3. Look for tire hairs: New original tires have many small hairs on the surface, which gradually disappear after driving 5-10 kilometers. Retreaded tires cannot replicate these hairs. 4. Lightly scratch with a key to check for marks: Due to prolonged use, the rubber on retreaded tires loses elasticity, and scratching with a key will leave marks. 5. Check the smoothness of the joint between the tread and sidewall: New tires have smooth and even joints, while retreaded tires have treads glued onto old tire bodies, leaving visible adhesive marks at the joints. 6. Examine the tire markings: Original tires have raised markings indicating the model, performance, production date, and wear indicators. These markings are integral to the tire on genuine new tires, whereas retreaded tires often have markings that are easily peeled off by hand.
16
3
Share

Can Novice Drivers Drive on the Highway?

Novice drivers are allowed to drive on the highway, but during the probationary period (one year), they need to be accompanied by an experienced driver. Regulations after the probationary period: They can drive on the highway alone. One major difference between driving on the highway and driving in the city is the higher speed on the highway. Since highway speeds are generally around 100 km/h, novice drivers who are not accustomed to such high speeds may be more prone to accidents. Therefore, before driving on the highway, novice drivers should practice handling the car at high speeds to avoid losing control due to nervousness. Precautions for novice drivers on the highway: Pre-drive vehicle inspection: Before driving, the driver should conduct a comprehensive check of the vehicle, with particular attention to fluids, tires, the braking system, etc. Ensure all fluids are at the proper levels and inspect the tires carefully, removing any debris from the tread. Adjust the rearview mirrors: Properly adjusted rearview mirrors allow the driver to better observe the sides and rear of the vehicle. Note that the adjustment methods for the left and right mirrors are slightly different. Hold the steering wheel correctly: On the highway, incorrect steering wheel grip can lead to veering. The correct grip is to place the left hand at the 9 o'clock position and the right hand at the 3 o'clock position on the steering wheel. The left hand should primarily control the steering, while the right hand rests lightly on the wheel for easy gear shifting.
2
0
Share

How to Use the Headlights of Baojun 510?

The lever on the left side of the steering wheel controls the headlights of the Baojun 510. Below is an introduction to the Baojun 510: 1. Positioning of the Baojun 510: The Baojun 510 is positioned as a compact SUV. The new model features a fresh family-style design with split-type headlights—the upper slim and sharp ones are LED daytime running lights, while the lower hexagonal units are the main high/low beam headlights. The chrome trim around the front grille extends to the daytime running lights above, giving the front fascia a broad and elegant appearance. 2. Overview of the Baojun 510: The side profile of the new model adopts a high waistline design, complemented by the currently popular floating roof. Dimensions-wise, the new model measures 4220mm in length, 1740mm in width, and 1605mm in height, with a wheelbase of 2550mm. Inside, the Baojun 510 features a black and brown color scheme with matte metal accents. In terms of features, the new model comes with keyless start, an 8-inch floating central touchscreen, a flat-bottom steering wheel, automatic air conditioning, cruise control, and more. Under the hood, the new model is powered by the same L2B 1.5L naturally aspirated engine as the Baojun 730, delivering a maximum power of 82kW and a peak torque of 147Nm, paired with a 6-speed manual transmission. The combined fuel consumption is rated at 6.3L/100km.
6
5
Share

Is the Audi Q5 a Full-Time Four-Wheel Drive or an On-Demand Four-Wheel Drive?

The Audi Q5 is equipped with a full-time four-wheel drive system. Full-time four-wheel drive means the vehicle maintains four-wheel drive throughout the entire driving process, with the engine's output torque distributed to the front and rear wheels at a fixed ratio. This drive mode ensures excellent off-road and handling performance at all times, but it cannot adjust torque distribution based on road conditions and results in higher fuel consumption. The Audi Q5 is powered by a 2.0-liter turbocharged engine, which delivers a maximum power of 169 kW and a maximum torque of 350 Nm. The engine reaches its maximum power at 4,300 to 6,000 rpm and its maximum torque at 1,500 to 4,200 rpm. This engine features AVS (Audi Valvelift System) variable valve lift technology and hybrid injection, with an aluminum cylinder head and cast iron cylinder block. It is paired with an 8-speed automatic transmission.
14
1
Share

Is the Audi R8 a mid-engine or rear-engine car?

Audi R8 is a mid-engine car. The engine of this car is located behind the front seats and in front of the rear axle. If it were a rear-engine car, the engine would be installed behind the rear axle. The Audi R8 is a mid-engine two-seater supercar produced by the German automaker Audi, with a top speed of 316 kilometers per hour. The exterior lines of the Audi R8 are highly compact, with the front of the body seamlessly integrated with the elegantly curved roof. The side lines of the car also reflect the characteristics of the Audi family, with dynamic lines above the wheel arches and side lines connecting the front, side, and rear of the body. The transition between the doors and the side air vents leaves a deep and strong impression.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.