How Often Should a Small Vehicle Undergo Inspection?

2 Answers
MacElliot
08/31/25 6:44am
Starting from September 1, 2015, newly registered small passenger cars are exempt from inspection for the first 6 years. Below are the relevant details: Compulsory Traffic Insurance Policy: According to the new regulations, non-commercial small passenger cars and similar vehicles are exempt from inspection for 6 years. During this period, the vehicle owner or the unit to which the vehicle belongs must submit the compulsory traffic insurance policy and the vehicle and vessel tax certificate to the vehicle management office every 2 years. They can then directly apply to the public security traffic management department for the inspection compliance label. Services: With the implementation of the new regulations, the public security traffic management department provides services such as cross-regional inspection and online appointment booking for small passenger cars, making it more convenient for vehicle owners. Within the same city, vehicle owners can independently choose an inspection agency for the inspection. Appointment: To facilitate vehicle inspection, the inspection agencies at the vehicle management offices have set up dedicated appointment channels and windows for vehicles with scheduled inspections. This reduces waiting times for owners during the inspection process, allowing them to proceed directly to the inspection line. After passing the inspection, they can receive the annual inspection compliance label and the environmental protection label with the inspection report.
Was this review help?
9
1
Share
JasperMarie
09/13/25 3:05am
Speaking of the annual inspection cycle for small cars, as a car owner, I really have some experience to share. It all depends on the age of the vehicle. New cars are the most hassle-free—no on-site inspection is required for the first 6 years, but you must apply for an electronic inspection mark via the Traffic Management 12123 App every two years. When my car just turned two years old, I handled it directly on my phone, which was super convenient. After 6 years, it gets much stricter: for vehicles aged 6-10 years, on-site inspections are mandatory in the 6th and 10th years, while the 8th year is exempt from on-site inspection but still requires applying for the electronic mark. If the car is over 10 years old, you’ll need to go for an on-site inspection every year. Don’t forget to clear all traffic violations before the annual inspection, or you’ll be turned away at the inspection station.
Was this review help?
15
2
Share
Expand All
More Forum Discussions

Will the driver's license be invalid if not obtained within two years?

Driver's license will not be invalid if not obtained within two years. Validity period of driver's license examination: If you only registered for the exam but haven't taken or passed Subject 1, then the exam period will never expire. The driver's license won't be invalid if not obtained within two years. The validity period for the driver's license exam is three years, generally calculated from the date of the first Subject 1 exam, and it becomes invalid after exactly three years. Introduction to driver's license: The full name of the driver's license is motor vehicle driving license, also known as "driver's license". It is a certificate required by law for motor vehicle drivers. Driving a motor vehicle requires certain driving skills. Without these skills, driving a motor vehicle at will may lead to traffic accidents. Generally, people cannot drive on the road without a license. However, for those who have acquired safe driving skills, the document that allows them to drive vehicles on the road is the "driver's license". This indicates that a driver's license is a "permit".
20
4
Share

How to Drive in the S-Curve for Subject 2?

Below are the operation methods for driving in the S-curve for Subject 2: 1. Enter the first curve: Drive along the right side of the road into the curve, maintain a slow and steady speed, turn the steering wheel to the left, and shift the vehicle from driving on the right side to the left side. 2. Enter the second curve: Keep the left wheels of the vehicle 0.5m away from the edge of the road and adjust the direction appropriately. When exiting the curve, turn the steering wheel back to enter straight driving. Additional tips: 1. When entering the curve, slow down in advance and stay on the right side; do not turn the steering wheel too quickly or sharply; try to choose a route with a larger turning radius. 2. Avoid using the brake, especially emergency braking; check the rearview mirror—it's essential to learn how to use it. Also, master the clutch by using the half-clutch technique.
16
3
Share

What Causes Engine Knock in Cars?

Car engine knock is caused by: 1. Excessively advanced ignition timing: When ignition occurs too early during the compression stroke, most of the air-fuel mixture burns while the piston is still compressing, causing the remaining unburned mixture to auto-ignite under extreme pressure, resulting in knock. 2. Severe carbon buildup in the engine: Excessive carbon deposits in the combustion chamber not only increase the compression ratio but also create hot spots on the carbon surface, leading to engine knock. 3. Overheating engine: High intake air temperatures in hot environments or poor engine coolant circulation can both cause high-temperature engine knock. 4. Incorrect air-fuel ratio: An overly lean fuel mixture raises combustion temperatures, which increases engine temperature and makes knock more likely to occur.
18
4
Share

What is the reason why the Audi air conditioner sometimes cools and sometimes does not?

The reason why the Audi air conditioner sometimes cools and sometimes does not is due to an issue with the amount of refrigerant. The specific reasons are as follows. Insufficient cooling caused by excessive refrigerant: Excessive refrigerant is usually caused by overfilling during maintenance, as the proportion of refrigerant in the air conditioning system has specific requirements. If the proportion is too high, it can affect heat dissipation, meaning more heat dissipation leads to greater cooling capacity; conversely, less heat dissipation results in reduced cooling capacity. Similarly, adding too much cooling oil during maintenance can also decrease the system's heat dissipation. Insufficient cooling caused by low refrigerant: The main reason for insufficient refrigerant is typically minor leaks in the system. If there is insufficient refrigerant in the air conditioning system, the amount of refrigerant sprayed into the evaporator from the expansion valve will also decrease. As a result, when the refrigerant evaporates in the evaporator, the amount of heat absorbed will decrease, leading to reduced cooling capacity.
12
3
Share

What Causes the Unstable Fluctuation of the Temperature Gauge?

The unstable fluctuation of the temperature gauge is caused by a faulty coolant temperature sensor or a damaged thermostat. The engine coolant temperature, if fluctuating erratically, indicates an abnormality in the vehicle's cooling system. The erratic behavior of the temperature gauge can be due to dirt on the contact surface between the coolant temperature sensor and the coolant, aging of the thermistor, abnormal operation of the voltage regulator, a short circuit in the heating coil of the temperature gauge, or an unstable thermostat sensor that intermittently opens and closes, leading to the fluctuating readings. Below are detailed explanations: Faulty Coolant Temperature Sensor: If the coolant temperature sensor fails or malfunctions, the engine ECU will detect an unreliable output signal and intervene by using a substitute value to protect the engine. This results in unstable readings on the temperature gauge, along with symptoms such as difficulty in cold starts and poor acceleration. Damaged Thermostat: The thermostat automatically adjusts the flow of coolant into the radiator based on the temperature, altering the coolant's circulation range to regulate the cooling system's efficiency and ensure the engine operates within the optimal temperature range. A damaged thermostat disrupts the engine's normal operating temperature, causing instability in the temperature gauge readings.
18
0
Share

What Causes Abnormal Noise When Depressing the Clutch and Shifting Gears While Driving?

Here are the reasons for abnormal noise when depressing the clutch and shifting gears while driving: 1. Slightly depress the clutch pedal to make the release lever contact the release bearing. If a "grinding" or "scraping" sound is heard, it indicates noise from the release bearing. If the noise persists after lubrication, the bearing is excessively worn and should be replaced. 2. If the noise occurs when the pedal is fully depressed and disappears when released, it suggests looseness or breakage of the clutch damper spring. 3. If the noise occurs when repeatedly depressing the pedal, either just as the clutch engages or disengages, it indicates loose rivets or excessive wear of the spline. 4. If there is intermittent collision noise, it may be due to axial play of the release bearing. In this case, the release bearing return spring should be replaced.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.