How often should a passenger car be inspected after 6 years?

2 Answers
AubreeMarie
07/29/25 2:09am
After a passenger car reaches 6 years, it requires an annual inspection and must also undergo a testing line inspection. For passenger transport vehicles: Within 5 years, inspect once a year; after 5 years, inspect every 6 months. For cargo vehicles and non-passenger transport vehicles: Cargo vehicles and large or medium-sized non-passenger transport vehicles should be inspected once a year within 10 years; after 10 years, inspect every 6 months. For non-passenger transport vehicles: Small and micro non-passenger transport vehicles should be inspected every 2 years within 6 years; after 6 years, inspect once a year; after 15 years, inspect every 6 months. For motorcycles: Motorcycles should be inspected every 2 years within 4 years; after 4 years, inspect once a year.
Was this review help?
14
0
Share
Figueiredo
08/12/25 6:09am
As a veteran driver with over a decade of experience, I'm well aware of the annual inspection rule requiring cars to be checked every year after six years of service. This is due to increased aging risks - issues like brake wear or lighting malfunctions can cause accidents. I remember once forgetting an inspection and getting fined while wasting time, so I now set phone reminders. Annual inspections aren't just about regulations - they're crucial for daily safety. I recommend visiting a repair shop for pre-checks a week early to ensure lighting and emissions compliance, avoiding repeated trips. Many inspection stations now offer online appointments for convenience. While inspection fees are modest, timely compliance prevents hassles. Well-maintained vehicles pass inspections smoothly, giving everyone peace of mind.
Was this review help?
5
5
Share
Expand All
More Forum Discussions

What is the fuel consumption of Baojun 730 with air conditioning on in summer?

The official combined fuel consumption of Baojun 730 1.5L manual is 6.8L/100km; 1.5T manual is 7.1L/100km; 1.5T automatic is 7.6L/100km. Below is the relevant introduction of Baojun 730: 1. Power: Equipped with a '1.5T turbocharged engine + simulated 8-speed CVT continuously variable transmission' power combination. The engine's rated power is 111kW, with a maximum net torque of 250N·m. The engine turbo can intervene at around 1000 rpm, and at 1600 rpm, it can reach the maximum torque of mainstream 2.4L naturally aspirated engines on the market. 2. Configuration: Standard 8-inch floating central control multimedia screen, with high-end models offering a 7-inch full LCD instrument panel. The new car is equipped with Car-play, SSP-LINK in-car connectivity platform, and other functions, supporting both Android and Apple systems. 3. Interior: The new Baojun 730 automatic transmission features a new black-gray interior color scheme, paired with dark wood-grain imitation panels on the dashboard, ice-blue ambient night lighting, and new dual-tone luxury seats, giving the interior a sense of layering, quality, and visual spaciousness.
1
2
Share

How often should a 7-seater vehicle be inspected after six years?

After six years, a 7-seater vehicle should undergo an annual inspection every two years. For vehicles over 10 years old, the inspection is required once a year. Relevant details are as follows: 1. Introduction: The new inspection regulations include 7 to 9-seater non-commercial small and mini passenger vehicles (excluding vans) within the exemption scope for the first six years. For non-commercial small and mini passenger vehicles (excluding vans) over six years but under 10 years old, the inspection frequency is adjusted from once a year to once every two years. 2. Note: At the 6th and 8th year, the vehicle must undergo an on-site inspection. For private vehicles over 10 years old, the original inspection cycle still applies, meaning once a year for vehicles between 10 and 15 years old, and once every six months for vehicles over 15 years old. Motor vehicle safety inspection institutions must conduct inspections according to national safety standards and bear legal responsibility for the inspection results.
12
5
Share

What is the Principle of Correcting a Skid in a Car?

If the skid is caused by braking, immediately stop braking, reduce the throttle, and simultaneously turn the steering wheel toward the side of the skid. Avoid turning the wheel too sharply or for too long, as this may cause the vehicle to slide in the opposite direction. By stopping the braking, the wheels are released from the locked state, thereby improving lateral traction. Here are additional details: Precautions: Driving too fast on bumpy or uneven road surfaces can intensify vehicle vibrations, potentially damaging components of the vehicle's transmission and suspension systems. This is especially true when driving through puddles or mud during rainy conditions. While driving, maintain a safe distance from the vehicle ahead. When encountering oncoming traffic, pay extra attention to the road conditions. Avoid erratic steering or sudden braking during encounters to prevent skidding and potential collision accidents.
20
4
Share

What are the reasons why the Buick GL8 key cannot unlock the door?

Here are the reasons why the Buick GL8 key cannot unlock the door: 1. Insufficient battery power: If the car remote key fails, a dead key battery can also cause a situation that resembles remote failure. In this case, replace the key battery to see if the situation improves. 2. Sealing issue: If the key has power but the remote function fails, over time, due to sealing problems, the interior may suffer from moisture, dirt, oxidation, and other factors, causing the buttons to gradually become less responsive. In this situation, you need to disassemble the key casing and use a cotton swab dipped in alcohol to clean the button base on the internal circuit board of the key. 3. Poor circuit board contact: Another possibility for car remote failure is poor contact on the circuit board. This requires soldering, but since the solder points are very small and most car owners lack tools like a soldering iron, it is recommended to take it to a professional electronics repair or mobile phone repair shop for handling.
19
3
Share

Where is the rearview mirror heating button on the Alphard?

The Alphard does not have a separate switch for rearview mirror heating. On the air conditioning panel, there is a fan-shaped button with an upward arrow—this is the switch. Simply press it to light it up, and the heating function will start working. Rearview mirror heating is particularly useful during rainy or snowy weather. When activated, the heater behind the mirror quickly warms the surface, gradually removing rainwater or fog, eliminating the need for the driver to manually wipe the mirrors frequently and thereby reducing driving hazards. How to use the rearview mirror heating function: There are generally two ways to activate the rearview mirror heating function. One is combined with the electric rearview mirror adjustment button—just rotate the knob to turn it on. The other is located on the air conditioning control panel—press the heating button to activate it. There’s no need to manually adjust the angle, as the driver’s side has an adjustment button. Principle of the rearview mirror heating function: After pressing the button, the electric heater behind the rearview mirror glass rapidly heats up to a fixed temperature within a few minutes, typically between 35-60 degrees Celsius. Heat is then emitted from the left and right rearview mirrors. Simultaneously, as the temperature rises and evaporation occurs, water droplets on the mirror surface gradually shrink, and fog slowly disappears, effectively defogging and deicing the mirror. However, if the rain is particularly heavy, the effect may diminish and become less noticeable. Precautions for using the rearview mirror heating function: The principle of rearview mirror heating involves electric heating wires embedded in the mirror, which consume a significant amount of power. When using this function, ensure the car is in an ignited state. Avoid activating rearview mirror heating while the car is stationary to prevent draining the battery and potentially leaving insufficient power to start the car. Other methods for defogging rearview mirrors include: Opening windows for air circulation: Crack open both side windows slightly to allow air exchange between the inside and outside of the car. This reduces the temperature difference, causing the fog to gradually disappear. Adjusting the car’s air conditioning to the appropriate setting can also help, as blowing warm air from the AC can effectively defog the mirrors.
17
1
Share

Does Tire Patching Always Damage the Rim Edge?

Under normal circumstances, the rim will not be damaged during tire patching, which depends on whether the tire changer is functioning properly. Some tire changers may cause rim scratches if there are gaps. There are four common methods for car tire repair, such as using rubber strips for patching, which is the earliest and most traditional method. Simply take a large rubber strip and insert it into the punctured hole in your tire, preventing air leakage. Another method is using mushroom plugs for tire repair. These mushroom plugs somewhat resemble thumbtacks or what we call push pins, with a flat base that is quite similar to a patch. Alternatively, there's cold patching, which requires removing the tire from the rim (or wheel). A layer can be ground off like this, and then a new patch is applied on top.
16
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.