How often should a newly purchased car be waxed?

1 Answers
ConnorRose
07/29/25 3:18pm
A newly purchased car only needs to be waxed after six months. It is unnecessary and even counterproductive to wax a new car too early because the vehicle comes with a protective wax coating from the factory. Waxing too soon may remove this original protective layer, wasting effort and failing to achieve the intended results. Car waxing is a traditional aspect of automotive care, primarily serving to waterproof and protect against acid rain. The wax coating significantly reduces water droplet adhesion on the car's surface, with effectiveness ranging from 50% to 90%. Additionally, car wax helps prevent static electricity and dust buildup. As the car moves, friction with the air generates static, and the wax effectively minimizes contact between the car's surface and airborne particles.
Was this review help?
10
1
Share
More Forum Discussions

What is the process of upgrading from a C driver's license to a B2 driver's license?

The process of upgrading from a C driver's license to a B2 driver's license is: 1. Apply to the vehicle management office for upgrading the driving license type to B2; 2. To apply for adding a driving license type, you need to fill out an application form, submit your ID card and physical examination form, and provide the original copy of your current motor vehicle driver's license; 3. Participate in the theoretical test and practical test according to the appointment; 4. The new-level driver's license will be issued by the applying vehicle management office within 7 working days after passing the exams. The specific contents of the exams include: the test of road traffic safety laws, regulations, and related knowledge; the test of field driving skills and road driving skills. The vehicle types that a B2 driver's license can drive are heavy and medium-sized trucks or large, heavy, and medium-sized special operation vehicles, and other permitted driving types are C1, C2, C3, C4, and M.
17
4
Share

How to manually reset the maintenance light on a Highlander?

The steps to manually reset the maintenance light on a Highlander are: 1. Locate and press the A button without releasing it, while simultaneously pressing the brake pedal with your foot; 2. Turn the ignition switch to the 'on' position without starting the car; 3. Characters will flash or the display will blink; 4. Continue holding the A button until ellipsis symbols appear on the dashboard; 5. Release the brake pedal and the A button; 6. Turn off the vehicle's power to complete the maintenance light reset. Taking the Highlander 2021 2.0T 2WD Elite 5-seater as an example, its dimensions are 4890mm in length, 1925mm in width, and 1720mm in height, with a wheelbase of 2790mm. It is equipped with a 2.0T turbocharged engine and a 6-speed automatic transmission.
10
2
Share

What is the fuel tank capacity of the Buick Verano in liters?

The fuel tank capacity of the Buick Verano is 44 liters, as officially announced. Owners who have purchased the Buick Verano can also check this information on the vehicle's configuration sheet. The Buick Verano requires 92-octane fuel, with a fuel consumption of 5.8 to 6.3L per 100 kilometers. A full tank can cover a distance of 698 to 759 kilometers. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically done by observing the fuel gauge inside the vehicle. Under normal circumstances, the fuel level will be accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel midway. During actual refueling, the amount of fuel added may exceed the marked capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safety limit. There is additional space from the safety limit to the tank opening, which is designed to allow for fuel expansion due to temperature increases without causing overflow. If fuel is added up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
4
4
Share

Is it a problem to add a bottle of fuel additive to 10 liters of gasoline?

10 liters of gasoline should not directly mix with a whole bottle of fuel additive. The recommended mixing ratio for fuel additives is 1:1000. A 65ML bottle of fuel additive is designed for 50-65 liters of gasoline. For 10 liters of gasoline, approximately 10-15ML (about 1/4 bottle) of fuel additive should be added. Excessive imbalance in the mixing ratio may cause engine knocking. Precautions for adding fuel additives: Maintain the proper ratio, with fuel to additive at 1000:1; Add in batches: first pour a bottle of additive into the fuel tank, then add the appropriate proportion of gasoline. Subsequently, add half a bottle of additive for every 25 liters of gasoline refilled; Avoid excessive frequency of use. Overuse of fuel additives can easily lead to oil contamination and may adversely affect the fuel tank, engine, and the vehicle itself. Hazards of excessive fuel additive usage: Fuel additives are auxiliary products. Long-term excessive use can increase carbon deposits in the combustion chamber, leading to engine knocking and detonation. Therefore, it's important to pay attention to the quality of the fuel additive when using it.
13
4
Share

What are the reasons why the Sylphy's one-button start cannot detect the key?

Sylphy's one-button start cannot detect the key due to reasons such as insufficient key battery, key malfunction, or electromagnetic interference. Insufficient key battery: If the one-button start cannot detect the key, the first thing to check is whether the car key still has power. You can try replacing the key's battery and then attempt the one-button start to see if it returns to normal. If it doesn't, it could also be due to poor battery contact, in which case the car key may need to be repaired. Key malfunction: You can try using the car's spare key to check if the first key is malfunctioning. If the spare key works, it indicates that the first key is faulty. If the spare key also doesn't work, you need to take the car to a repair shop for inspection. Electromagnetic interference: You need to analyze whether there are other sources of electromagnetic or signal interference. Sometimes, placing a phone and the car key together can cause interference, or the car's dashcam might also interfere with the car key. You can place the key in a separate location and try starting the car again. If it still doesn't start, you need to check the transmitter and receiver.
5
2
Share

Reasons for the Persistent Tire Pressure Warning Light in the 2020 Honda XR-V

The persistent tire pressure warning light in the 2020 Honda XR-V indicates an abnormality in the tires. The method to reset the tire pressure light for the 2020 XR-V is as follows: first, restore the tire pressure to normal levels before resetting, start the vehicle, and then press and hold the tire pressure SET button on the center console until the tire pressure data refreshes. Tire pressure monitoring light: The tire pressure monitoring indicator is a yellow symbol, an irregular circle with no seal on top and four small spikes at the bottom, containing an exclamation mark inside. The illumination of the tire pressure monitoring light indicates abnormal tire pressure. Abnormal tire pressure generally has the following three causes: Abnormal tire pressure: Typically, an alarm is triggered when the pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset promptly, the tire pressure monitoring system will still record the previous data, causing the tire pressure monitoring light to illuminate. Simply performing a tire pressure reset will resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, which monitors tire pressure, is directly installed inside the tire and connected to the tire inflation valve. If the sensor is damaged due to impact while driving, it can also cause the tire pressure warning light to turn on. For sensor damage issues, the only solution is to replace it with a new component.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.