How Often Should a New Car's Engine Be Cleaned?

1 Answers
DiJulianna
07/29/25 9:19am
New cars should have their engines cleaned every 30,000 to 50,000 kilometers. The method for cleaning the engine lubrication system is as follows: 1. Pour the engine cleaning agent directly into the oil filler port; 2. Start the vehicle and let it idle for 10 to 15 minutes; 3. Drain the old oil containing the cleaning agent until the cleaning process is complete; 4. Replace with new oil and oil filter. An engine is a machine that converts other forms of energy into mechanical energy. It was invented in the UK and can refer to either the power-generating device or the entire machine, including the power unit. Engine types include internal combustion engines, external combustion engines, electric motors, and more.
Was this review help?
5
5
Share
More Forum Discussions

What brand of car is the GM logo?

The car with the GM logo is from the American company General Motors. Nowadays, it's almost impossible to see the GM logo, as early models of General Motors used the GM logo, but later, with the acquisition of more brands, each brand started using its own logo. Information about General Motors is as follows: 1. General Motors globally produces and sells a series of brand models including Chevrolet, Buick, GMC, Cadillac, and provides services. Its products are popular in many countries and regions worldwide, including electric vehicles, micro cars, heavy full-size trucks, compact cars, etc. 2. General Motors actively promotes the advancement of energy-efficient technologies, including direct injection technology, variable valve timing, turbocharging, six-speed transmissions, diesel engines, and optimized aerodynamic designs.
12
3
Share

Can Pickup Trucks Be Driven in the City?

Pickup trucks can be driven in urban areas. As a type of light truck, pickup trucks are subject to restrictions on operating hours, routes, and zones, but they can be driven within city limits outside of restricted hours. The specific restrictions on pickup trucks vary by region. The reasons for prohibiting trucks in cities are as follows: 1. Most large trucks are generally banned in cities; 2. Urban roads have limited load-bearing capacity; 3. Overloaded or oversized trucks are prone to causing traffic accidents and congestion; 4. Cities like Beijing implement strict traffic control measures, partly for traffic management and partly for environmental improvement.
3
3
Share

What are the differences between Yadea Guaneng T2 and T5?

Yadea Guaneng T2 and T5 can be distinguished from two dimensions: 1. The appearance of T2 and T5 is different. T2 has a more rounded design, while T5 has a more streamlined design. 2. There is a price difference between these two models. T5 is slightly more expensive than T2 by a few hundred yuan, because T5 uses a composite variable-frequency battery, while T2 continues with the older graphene battery. The difference in battery cost and market positioning leads to the price gap. 3. The color options are different. T2 offers six color choices: Turquoise Green, BMW Blue, Electric Bright Red, New Nebula Gray, New Taffeta White, and New Bright Black. T5 offers seven color choices: Metallic Titanium Red, Interstellar Brown, Silk Red, Turquoise Green, Elegant Gray, Metallic Titanium Blue, and New Taffeta White.
14
3
Share

What Are the Reasons for a Fuel Tank Cap Not Locking?

Fuel tank cap not locking is due to deformation of the fuel tank cap, damage to the locking mechanism, or issues with the wiring harness. Deformation of the car's fuel tank cap can cause it to jam when closing; if the fuel tank cap is not aligned with the lock hole and is forced shut, it can lead to severe deformation of the cap, necessitating replacement with a new one. It could also be due to damage to the locking mechanism, which would require replacement of the locking mechanism. Some cars use an electronic unlocking device inside the fuel tank cap, similar to the working principle of a solenoid valve. This mechanism can also result in the fuel tank cap not locking properly, possibly due to issues with the power supply wiring harness of the electronic lock. Since the internal structure of the electronic lock is located inside the rear wheel liner, the wiring harness connector can be corroded by dirty water and dust after the wheel is submerged, affecting the switch. It is important to address wiring harness issues promptly. To deal with damaged wiring harness connectors and harnesses, protect the wiring harness by applying conductive paste inside the connectors and plugs to prevent future corrosion.
18
5
Share

What Are the Reasons for Being Unable to Shift Gears?

The reasons why a car cannot shift gears are as follows: 1. No fuel: The fuel gauge shows below the red line, naturally making it impossible to start. 2. Dead battery: This may be due to a drained battery caused by leaving headlights on for too long or the battery reaching the end of its lifespan. It is generally recommended to replace the battery every 2 years. Additionally, installing xenon headlights, high-power audio systems, or DVD players can also cause vehicle circuit failures. Checking for a dead battery is simple—just press the horn. 3. Incorrect gear position: For automatic transmission cars, the gear must be in P (Park) or N (Neutral) when starting. If it is in R (Reverse) or D (Drive), the car will not start. Some manual transmission cars also won’t start if the clutch is not depressed. 4. Lack of antifreeze: Some car owners use water or low-quality antifreeze, leading to the entire cooling system freezing in extremely cold winter conditions. This can crack the engine, render the water pump inoperable, prevent the car from starting, and damage other engine components. 6. P-lock solenoid valve failure: For safety reasons, to prevent accidental shifting into other gears when starting the vehicle, a P-gear solenoid valve is installed. This solenoid valve requires a signal from the brake pedal to release. These two components are interconnected, so a failure in either one will prevent the gear lever from being moved out of P to other gears. 7. Gear lever assembly failure: Internal gear wear in the gear lever can cause it to get stuck, making it difficult to move forward or backward, resulting in an inability to shift gears or difficulty in shifting. 8. Incomplete clutch disengagement: This may be caused by a faulty clutch disc or pressure plate. Typically, the clutch three-piece set—friction disc, pressure plate, and release bearing—needs to be replaced.
12
2
Share

Why is the Vehicle Stability Control System Light On?

Vehicle Stability Control System light is mainly caused by a fault in the vehicle stability electronic control system. If this fault occurs, it is recommended to visit a 4S shop to use a professional decoder to read the fault code, and then proceed with repairs based on the fault code. The Vehicle Stability System, also known as the ESP system, primarily consists of three major components: sensors, actuators, and an electronic control unit. Below is a related introduction to the Vehicle Stability System: 1. Function: The Vehicle Stability System is an active safety system in automobiles that greatly enhances vehicle handling and safety. When the car makes sharp turns or accelerates suddenly, the sensors on the vehicle can quickly detect and take corresponding measures to control the car's tires accordingly, while also reducing engine power output to ensure vehicle stability. 2. Included Scope: The Vehicle Stability Control System also includes ABS and ASR. ABS prevents the car from locking up during braking, and ASR prevents the car from slipping during startup.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.