How Often Should a New Car Have Its First Maintenance?

What tires are used on the GAC Trumpchi GS3?

The GAC Trumpchi GS3 is equipped with Michelin Primacy 3ST tires, with the tire model being 215/65R16. Michelin, founded in 1889 in Clermont-Ferrand, France, is one of the world's top three tire manufacturers. It currently operates across five continents with R&D centers in Europe, North America, and Asia. For daily use of the GAC Trumpchi GS3 tires, pay attention to the following points: Regularly inspect the tire surface for cracks, deformations, or other defects. Due to driving wear, the tread grooves gradually become shallow. If the tread is worn flat, it will lose its drainage and anti-slip functions, significantly reducing the vehicle's performance. Small cracks may seem minor but can lead to tire blowouts at high speeds. Additionally, promptly remove pebbles from the grooves; try to park on flat ground. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials that can deteriorate rubber. After parking, the driver should not turn the steering wheel, as this accelerates tire wear; do not splash water for cooling. In hot weather or during high-speed driving, tires are prone to overheating, and tire pressure increases. In such cases, stop to allow the tires to cool naturally. Avoid deflating or splashing water to cool them, as this can cause abnormal aging of the tread rubber; avoid sudden braking. Minimize frequent or hard braking to prevent accelerated tread wear due to dragging between the tires and the road.

9

1

Share

Where is the Roewe RX5 Max 6-speed AT transmission produced?

The Roewe RX5 Max 6-speed AT transmission is a product of collaboration between SAIC, General Motors, and BorgWarner. The transmission is produced in China. The Roewe RX5 Max is equipped with either an 8-speed automatic transmission or a 6-speed automatic transmission. An automatic transmission, abbreviated as AT (Auto-Transmission), consists of a torque converter, planetary gears, and a hydraulic control system. It achieves gear shifting and torque variation through hydraulic power transmission and gear combinations. Vehicles with automatic transmissions can automatically adjust gears and torque based on road conditions, allowing drivers to focus entirely on traffic without being distracted by shifting gears. For the Roewe RX5 Max transmission, the following points should be noted during daily use: Do not delay changing the transmission oil for extended periods. Prolonged failure to change the transmission oil can damage internal components such as bearings and the housing. Avoid coasting in neutral for long durations. While manual transmission drivers often coast in neutral, doing so in an automatic transmission vehicle can cause overheating and create a jolt when shifting back to Drive (D). Never shift into Drive (D) or Reverse (R) before the vehicle comes to a complete stop. Some drivers shift into reverse while still moving to demonstrate smooth operation, but this can severely damage the transmission gears, potentially leading to gear grinding or other failures over time. Avoid frequently climbing steep slopes in Drive (D). Automatic transmission vehicles may overheat under high load or shift too early, resulting in insufficient power. In such cases, use manual mode to lock in a lower gear or switch to sport mode to protect the transmission. Do not tow the vehicle over long distances. If an automatic transmission vehicle breaks down, use a flatbed tow truck to transport it in Neutral (N). Avoid using tow ropes or dragging the vehicle directly, as this can damage the transmission.

5

2

Share

Is it considered overloading if a 5-seater car carries 5 adults and 1 child?

A 5-seater car carrying five adults and one child is considered overloading. Passenger vehicle overloading is calculated per person, and exceeding even one person, whether an adult or a child, counts as overloading. Overloading a car may result in a fine ranging from 500 to 2000 yuan and a deduction of 6 to 12 points from the driver's license. The following is an introduction to vehicle overloading: 1. Traffic Safety Law stipulates: Scoring is based on the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China," which states that traffic management departments of public security authorities, in addition to imposing administrative penalties, implement a cumulative scoring system (hereinafter referred to as scoring) for road traffic safety violations by motor vehicle drivers. The scoring cycle is 12 months. 2. Penalties for overloading: If a driver accumulates 12 points within a scoring cycle, the traffic management department of the public security authority will detain their motor vehicle driving license. The driver must then participate in the study of road traffic safety laws and regulations and take an exam as required. If the exam is passed, the points will be cleared, and the driving license will be returned. If the exam is not passed, the driver must continue studying and retaking the exam. If a motor vehicle driver does not accumulate 12 points within a scoring cycle and has paid all fines, the points will be cleared. If points have not reached 12 but there are unpaid fines, the points will carry over to the next scoring cycle.

18

4

Share

80,000-kilometer car maintenance items?

Cars that have traveled 80,000 kilometers require maintenance items beyond the regular oil and three-filter changes. Consider cleaning the throttle body, replacing spark plugs and brake fluid, and changing the engine auxiliary belt and timing belt. Below are the detailed maintenance items for the 80,000-kilometer service: 1. Oil and fluids: All fluids in the car should be replaced on time as they have expiration dates. After expiration, their performance declines and may even have adverse effects. These fluids include: brake fluid, power steering fluid, transmission fluid, coolant, and windshield washer fluid. Windshield washer fluid can usually be topped up by yourself, or you can ask staff to add it during maintenance, car washes, or refueling. 2. Various filters: Such as oil filter, air filter, fuel filter, cabin air filter, and transmission fluid filter. The oil filter should be replaced with every oil change. The air filter and fuel filter are typically replaced every 10,000 kilometers. The cabin air filter is usually replaced twice a year—once in winter and once in summer. These filters must also be replaced. 3. Spark plugs, belts, tires, brake pads, and battery: If you don’t change cars too frequently, these five components will generally need replacement. The lifespan of spark plugs is approximately 40,000–80,000 kilometers, depending on the type used, as different spark plugs have varying lifespans. Belts typically last 3–6 years or 60,000–100,000 kilometers. They should be replaced when they reach their age or mileage limit, or inspected regularly, as a broken belt can immobilize the car, and a snapped timing belt can damage the engine. Tires last 3–5 years, with no strict mileage requirement—replacement is based on tread wear reaching the minimum limit. Most family cars require tire replacement due to age, even if the tread is still in good condition. Brake pads have no specific mileage limit and should be replaced when worn out. The battery also has no fixed mileage or age limit—replace it when its charge-holding capacity significantly declines. A battery tester can detect this, with typical lifespans ranging from 3–6 years.

19

4

Share

What Causes the Mazda6 Engine Warning Light to Illuminate?

There are primarily 7 reasons for the Mazda6 engine warning light to illuminate: Sensor malfunction: This includes sensors such as coolant temperature, crankshaft position, air flow, intake air temperature, and oxygen sensors. When these sensors are damaged, have poor connections, or their signals are interrupted, the vehicle's ECU cannot accurately obtain engine data, triggering the engine warning light. Fuel/oil quality issues: Failure to use the fuel and engine oil as specified by the manufacturer may cause engine wear, leading to the warning light activation. Poor fuel mixture combustion: Incomplete combustion can result in engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the warning light will illuminate as an alert. Faulty spark plugs, ignition coils, fuel pumps, or clogged fuel lines can all contribute to poor combustion. Turbocharger issues: Problems with the intake boost piping or turbocharger can also trigger the engine warning light. The most common issue is turbocharger damage, often accompanied by symptoms like oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Intake problems: Any obstruction in the air intake system may lead to engine piping blockages, potentially triggering the warning light. A dirty air filter that hasn't been regularly cleaned can cause intake issues. Exhaust system faults: Exhaust problems can also activate the engine light. Common causes include faulty rear oxygen sensors, catalytic converter issues, or problems with the exhaust camshaft and bearings. The catalytic converter is particularly vulnerable to damage from leaded gasoline, certain lubricant additives, physical impacts, or fuel system malfunctions. Anti-theft system failure: If the vehicle's electronic anti-theft system malfunctions or if there's incompatibility between the anti-theft controller and engine ECU, the system may prevent normal engine operation while illuminating the warning light. When the engine warning light comes on, follow these steps: First check if the engine is running normally. If there's noticeable shaking, black smoke, or other abnormalities, avoid restarting the engine. Note: Never restart if the red warning light is on. If the engine can be started, turn off the ignition for 5-10 minutes. Then, without pressing the brake pedal, press the start button once or turn the key halfway to the ON position (without engaging the clutch). The vehicle will perform a self-diagnostic check - observe whether the warning light turns off after 5-10 seconds. If the light remains on, visit a service center promptly. Technicians can use diagnostic tools to read trouble codes and perform targeted repairs.

3

5

Share

Why was the Hyundai Veloster discontinued?

Hyundai Veloster was discontinued due to low market demand. Here is a partial introduction about car maintenance: Definition: Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. Includes: Modern car maintenance mainly includes the engine system (engine), transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. The computer analyzes signals such as engine throttle opening and vehicle speed collected by sensors to automatically control shifting or make the transmission shift into different gears.

5

4

Share

How Often Should a New Car Have Its First Maintenance?

What tires are used on the GAC Trumpchi GS3?

Where is the Roewe RX5 Max 6-speed AT transmission produced?

Is it considered overloading if a 5-seater car carries 5 adults and 1 child?

80,000-kilometer car maintenance items?

What Causes the Mazda6 Engine Warning Light to Illuminate?

Why was the Hyundai Veloster discontinued?

Is there a difference between 2.0t and 2.0l?

What is the fuel consumption of the Chery Tiggo 3?

What are the brands of Sino-foreign joint venture cars?

Will highways only allow ETC in the future?