How often should a motorcycle chain be cleaned?

1 Answers
WilliamDella
07/29/25 10:34pm
Motorcycle chains should be cleaned every 2000 to 3000 kilometers. Below are specific details about motorcycle chains: 1. Function of the chain: The motorcycle chain is the connecting component between the transmission output gear and the drive wheel gear. If it is too loose, it cannot ensure the transmission ratio and power transfer. If it is too tight, it is prone to wear and breakage. If the chain is loose, it is best to promptly take it to a repair shop for inspection and replacement. 2. Effects of improper maintenance: If the chain is not maintained for a long time and the lubrication is poor, it will generate greater friction resistance during operation, which can also result in some loss of engine power. Long-term inefficient operation may also lead to chain loosening or even detachment. Therefore, regular maintenance involving cleaning and lubrication of the chain is necessary.
Was this review help?
7
4
Share
More Forum Discussions

Under what circumstances is overtaking not allowed?

Overtaking is not allowed under the following circumstances: 1. The vehicle ahead is turning left, making a U-turn, or overtaking. 2. There is a possibility of meeting an oncoming vehicle. 3. The vehicle ahead is a police car, fire truck, ambulance, or engineering rescue vehicle performing emergency tasks. 4. Passing through railway crossings, intersections, narrow bridges, curves, steep slopes, tunnels, pedestrian crossings, or sections of urban roads with heavy traffic where overtaking conditions are not met. Below is extended information on the correct steps for overtaking: 1. Observe through the rearview mirror: Before overtaking, observe the vehicles behind and the road conditions through the rearview mirror. Choose a time when visibility is good, the road is straight, and there are no vehicles within 150 meters ahead. 2. Turn on the left turn signal: After confirming that the surrounding conditions are suitable for overtaking, turn on the left turn signal and honk the horn to indicate your intention. At night, if honking is not allowed, use alternating high beams instead. Once the vehicle ahead signals to yield, slightly turn the steering wheel to the left and maintain a certain lateral distance from the vehicle being overtaken. 3. Downshift one gear: Press the accelerator deeply to increase speed and overtake from the left side of the vehicle being overtaken, minimizing the time the two vehicles are parallel. 4. Turn on the right turn signal: After overtaking, maintain speed for a while, observe the following vehicles through the rearview mirror, and once safety is confirmed, turn on the right turn signal and return to the original lane.
19
3
Share

Is the Chevrolet Menlo a dual-motor model?

Chevrolet Menlo is not a dual-motor model; it is a single-motor vehicle with a front-mounted motor and front-wheel drive. Introduction to the Chevrolet Menlo: 1. Body dimensions: The Chevrolet Menlo is a compact car under the Chevrolet brand, with a length of 4665 mm, width of 1813 mm, height of 1513 mm, and a wheelbase of 2660 mm. 2. Configuration: Equipped with pure electric drive technology and the new generation MyLink intelligent connectivity technology, it offers features such as virtual keys, remote control, and intelligent voice recognition. It also boasts a range of 410 kilometers, with a stable and reliable electric drive system.
20
4
Share

Is the BMW M760 rear-wheel drive or all-wheel drive?

The BMW M760 is an all-wheel-drive vehicle, but it does not use a full-time all-wheel-drive system. Instead, it employs an on-demand all-wheel-drive system. Cars equipped with on-demand all-wheel drive do not constantly deliver power to all four wheels. More details about the BMW M760 are as follows: 1. The BMW M760 is powered by a 6.6-liter twin-turbocharged V12 engine. The vehicle's body dimensions are 5273mm in length, 1902mm in width, and 1498mm in height. 2. The 6.6-liter twin-turbocharged V12 engine in the BMW M760 delivers 585 horsepower and a maximum torque of 850 Newton-meters. This engine can output its maximum power between 5250 and 5750 revolutions per minute and reaches peak torque between 1600 and 4500 revolutions per minute.
8
2
Share

Where is the engine number of the Great Wall Florid located?

The engine number of the Great Wall Florid is located at the right rear of the engine where it connects to the transmission. You need to remove the air filter box to see it. It is usually a combination of 7 to 8 digits and letters. In addition to the above method, the engine number can also be checked in the following 4 ways: The vehicle's driving license has the engine number printed on it, usually located on the second-to-last line; The motor vehicle registration certificate will state the engine number; The car purchase invoice will state the engine number; The vehicle purchase tax payment certificate will state the engine number. It is important to note that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer, and engine models can be the same. The engine number, however, refers to the production number of the engine. Each engine can only have one engine number, and each engine's number is unique.
13
4
Share

What is the tire model of the Global Hawk GX7?

The Global Hawk GX7 has two tire models, which are 225/60R17 and 225/65R17, varying according to different vehicle configurations. The spare tire is a non-full-size spare tire. Classification of tires: 1. Tires are classified by structure: They can be divided into radial tires and bias tires. 2. Classification by tread pattern: Car tires can be divided into rib pattern tires, transverse pattern tires, mixed pattern tires, off-road pattern tires, etc. Advantages of radial tires: Compared with ordinary bias tires, they have greater elasticity, better wear resistance, can increase tire service life by 30-50%, lower rolling resistance, reduce car fuel consumption by about 8%, better adhesion, better cushioning performance, greater load capacity, and are less prone to punctures.
8
4
Share

What are the symptoms of a broken water pump in a truck?

If the water pump is damaged, the coolant cannot circulate within the engine, which affects the engine's heat dissipation. If the engine's heat dissipation is compromised, it can lead to engine overheating, potentially causing damage to the engine. Relevant details are as follows: 1. The car's engine relies on the continuous circulation of coolant for heat dissipation. If the coolant cannot circulate within the engine, the engine will overheat. The water pump provides the power for the coolant circulation. 2. The coolant has two circulation paths within the engine: a major cycle and a minor cycle. 3. When the engine is just started, the coolant undergoes the minor cycle, during which it does not pass through the radiator, helping the engine warm up quickly. 4. Once the engine reaches its normal operating temperature, the coolant switches to the major cycle, passing through the radiator to dissipate heat, thereby maintaining the engine within an optimal temperature range.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.